RALPH LAUREN RL 2064 Rivington Round Sconce Instruction Manual
- June 4, 2024
- ralph lauren
Table of Contents
RALPH LAUREN RL 2064 Rivington Round Sconce
ASSEMBLY INSTRUCTIONS
Rivington Round Sconce
Item # RL 2064
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
- Carefully remove all parts from the box.
- Remove the crossbar (B) from the backplate (D) by loosening the finial (G) and plastic washer (F) and nut (E) with the wrench (H).
- Affix crossbar (B) onto the outlet box and secure with mounting screws (C).
- Connect the hot wire (BLACK) from the fixture to the hot wire from the outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.
- Connect the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE). DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
- Connect ground wire from the fixture (bare copper) to ground wire from the outlet box (usually green or copper in color). IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED.
- Attach the fixture (D) onto the crossbar (B) and secure the nut (E) with the wrench (H), then attach the plastic washer (F) to the nut (E) and secure with the finial (G).
- Insert bulb (not included) into the socket.
- Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>