Morpilot MS22C-001 Tire Inflator Portable Air Compressor User Manual
- June 14, 2024
- Morpilot
Table of Contents
Morpilot MS22C-001 Tire Inflator Portable Air Compressor User Manual
MS22C-001
PORTABLE TIRE INFLATOR USER MANUAL
Before using the product, please read this instruction manual carefully and keep it for future reference.
SAFETY NOTICE
Warn
Ensure to read all safety warnings, instructions, diagrams and regulations. Then save all warnings and instructions for your reference.
Please read this instruction manual carefully before using the product and store it in a safe place. This machine will produce more than 75dB noise when working. Please take all safety precautions seriously. When working continuously for a long time, the body and air tube will produce high temperatures; please cool it before use. This product is not a toy and is not intended for use by children.
PRODUCT INTRODUCTION
The inflator can inflate some motorcycles, bicycles, cars and balls. The detailed list can be found on the product sales page or you can consult customer service for assistance.
Component description
Tip: The illustrations of products, accessories, user interfaces, etc. in the manual are all schematic diagrams and are for reference only. Due to product updates and upgrades, there may be slight differences between the actual product and the schematic diagram. Please refer to the actual product.
PRODUCT ACCESSORIES
INSTRUCTION MANUAL
1. Power display and charging
Power display
The battery is displayed as three cells, and the number of lit cells represents the remaining power.
One grid on: 0% < the power ≤30%
Two grids on: 30% < The power ≤65%
Three grids on: 65% < the power ≤ 100%
Charging
Please fully charge before using it for the first time. Use the charging cable to connect the 5V USB adapter to charge the inflator.
Charge until the display screen shows 3 grids indicating fully charged.
TIPS
- To extend battery life, please charge every 1 month.
2. Turn on and turn off
Turn on
Press the switch button for 3 seconds until the machine start to work. In the power-on state, if there is no operation within 3 minutes, it will shut down. After the high-pressure trachea is pulled out and the inflatable treasure automatically shuts down, you can press the start-stop button to turn on the machine again.
Turn off
In the working state, long press the button to shut down the machine.
3. Connect the high-pressure tube with the nozzle
American air nozzle
Mountain bikes, e-bikes, motorcycles and cars are equipped with American-style air nozzles.
Inflation: Connect the American nozzle to the American nozzle on the high-pressure tube to inflate.
Deflation: Deflate by pressing the air needle inside the nozzle with a suitable tool (e.g. a 4mm allens wrench).
French nozzle adapters
French nozzle adapters will be used when inflating road bicycles and several mountain bicycles
Inflation:
- Connect the French nozzle adapters with the American nozzle interface on the high-pressure air inflation tube.
- Unscrew the French nozzle screws of the tires.
- Connect the French nozzle to the adaptor to inflate.
Deflation: Unscrew the screw at the mouth of the French nozzle and press the nozzle to deflate.
Air needles
Air needles are required when inflating balls such as basketballs and soccer balls.
Inflation: Screw the needle and American nozzle interface and insert the needle into the ball inflation hole to inflate.
Deflation: Plug the air needle directly into the ball inflation hole to deflate.
Safety hammer
Can be used for escape from broken windows
Other nozzles
Swimming rings or inflatable boats will be equipped with nozzles as shown here.
Inflation: Screw the nozzle connector and insert it into the swim ring or rubber boat to inflate it.
Deflation: Deflate by inserting the nozzle directly into the swim ring or rubber boat.
4. Detect air pressure
In the inflator on state, connect the high-pressure air inflation tube with the object; the number displayed on the inflatable pump display is the current pressure.
Tyre
Tires for cars, bicycles and motorcycles can withstand air pressure ranges marked on the side walls of the tires. The car tire guidance air pressure is marked near the inner wall of the driver’s side door. The level of inflation pressure is related to the weight of the load. For more detailed air pressure recommendations, please refer to the car manual.
Ball
The inflatable pressure of balls such as football. basketball and volleyball is marked around the inflatable port.
5. Recommended inflatable pressure gauge for common products
Tip: The recommended pressure range value of the inflatable is for reference only. Please refer to the requirements of the instruction manual of the inflated product.
6. Preset Inflatable Tire
Mode switching
Short press the mode button to switch the following five inflatable modes on the display. Long press the mode button before inflating to switch bar, psi, Kpa, kg/cm²
Free mode: preset pressure can be adjusted freely, and values and units can be remembered.
Adjustable range: 3-150psi / 0.2-10.3bar
Preset values are fine-tuned
“+” “-” Any button represents a manual increase and decrease of the preset tire pressure value. Each press increases 0.05Bar or 0.5Psi or 0.05Kg/cm² or 5Kpa to the maximum and minimum value alternatively. Current working states do not change when setting the preset pressure.
Lighting
Press the light button again to turn on the white light illumination. Press again to switch to a red blinking light (blink interval 1s). Press again to switch to a fast red blinking light (blink interval 0.5s) and press again to turn off the light.
7. Inflation
Start to inflate
Short press the switch button to start inflating. During the inflation process, there will be a noise of 75-80 decibels. Please be careful while doing this. If it’s in use for a long time, the temperature of the high- pressure air tube and the host rises; avoid long-term contact with the high- pressure air tube by hand
Stop inflating
When the air pressure reaches the preset pressure value, the inflator automatically stops inflating. The inflation can also be stopped by pressing the switch button shortly during the inflation process.
OPERATE INSTRUCTION
8. Unscrew the nozzle
The temperature of the high press air inflation tube is high after inflation. Please take the necessary precaution to protect yourself when disassembling the nozzle. There will be a slight air leakage during disassembly, please disassemble quickly to reduce the amount of air outlet.
9. Can be used as a power bank
In the state of full power, the inflator can be used as a 5V/1A power bank, and it needs to be turned on.
NOTE
- This product is not a toy; children are prohibited from use. Users are advised to be over 16 years of age. During the inflation process, please keep a safe distance between the children and the inflator.
- The product has built-in non-removable lithium battery, and it is forbidden to throw the product into the fire or abandon it at will. There might be a risk of fire, spontaneous combustion, explosion if the Lithium battery is overheating, impact or water ingress. Please avoid exposure to high temperature such as in the car.
- The storage temperature of the product should not be lower than-10 degrees or higher than 45 degrees, too cold or overheating will shorten the life of the product, or damage the built-in battery.
- The battery may get damaged if not used for a long time. It is recommended to charge at least once every three months.
- The product’s built-in DC motor may get experience electric sparks while in use. Please shut down immediately.
- If there is an abnormal noise or the temperature is too high when working, please shut down immediately.
- Do not leave when inflating, and observe the inflation process to prevent the inflating pressure from being too high if the preset air pressure is not set.
- Please use in a dry and clean environment. Sediment and sand intrusion may lead to product damage; the product is not waterproof, so it is forbidden to rinse with water.
- Before setting the inflation pressure value, please confirm the correct measurement unit is selected, otherwise it may lead to a tire blowout accident.
Common unit conversion: 1 bar = 14.5psi= 100kpa = 1.02kg/cm²
FAULT RESOLUTION
BASIC PARAMETERS
- The above data are from our laboratory. The actual use varies according to the change of use environment. Please take the real object as the standard.
- Due to the need of continuous improvement of products, the information products are subject to the actual products, and our company reserves the right to update the products.
AFTER-SALES SERVICE
- The machine is guaranteed for one year free of charge under normal conditions within one ear from the date of purchase.
- During the validity period of the free guarantee, the consumer can handle the maintenance and replacement with the invoice and the free guarantee vouchers.
- Within 7 days from the date of sale of the product, if a performance failure occurs, the consumer can choose to return, exchange or repair.
- Within 15 days from the date of sale of the product, if a performance failure occurs, the consumer can choose to replace or repair.
- Within the validity period of the free guarantee, the products that are repaired three times and still cannot be used normally can be exchanged for free with the same model and specifications with the repair records and certificates provided by the repairer.
- If it is necessary to repair or replace spare parts beyond the time limit set by the appeal, a maintenance fee will be charged.
- During the warranty period, if there are the following situations, it is not free to repair:
a. the consumer did the damage due to improper use and maintenance;
b. damage caused by unauthorized disassembly, assembly and repair;
c. damage caused by force majeure;
d. Failure or damage caused by non-general household use (such as use in places with harsh environments);
e. Failure caused by falling, being placed in water or directly flushing, improper operation or illegal use;
f. Repair beyond the scope of the warranty.
Warning
- In thunderstorm weather, please disconnect the external charger to avoid being damaged by lightning.
- Stay away from heat sources and maintain ventilation.
- It is forbidden to put the equipment in high temperature or throw it into the fire to avoid explosion.
- In the storage, transportation and operation environment, please pay attention to waterproofing.
NON-WARRANTY REGULATIONS
- Unauthorized maintenance, misuse, collision, negligence, abuse, liquid intake, accident, modification, improper use of accessories other than this product or tearing or altering the label;
- The validity period of the warranty has exceeded;
- Damage caused by force majeure;
- Failure to meet the performance failure listed in the “Product Performance Failure Table” ;
- Due to human reasons, the performance failure of this product and its accessories is caused.
Email: Support@morpilot.com
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>