Honeywell IDP ACB Module Cabinet Instruction Manual
- June 14, 2024
- Honeywell
Table of Contents
Honeywell IDP ACB Module Cabinet Instruction Manual
IDP-ACB Cabinet
Product Installation Document
PN 151404-L8:C 3/3/2022 ECN: 151770
Description
The IDP-ACB cabinet provides mounting space for two IDP or SK multi-modules.
NOTE: Installation and wiring of this device must be done in accordance with NFPA 72 and local ordinances.
Specifications
-
Mounting type: surface mount
-
Dimensions: 12.5” W x 15.25”H x 3.0”D
(31.8cm W x 38.7cm H x 7.6cm D) -
Weight: 6.25lbs (2.8kg)
Mounting
Mount the IDP-ACB using the four mounting holes as shown below in a dry, indoor location.
Installing Modules
The mounting process for IDP or SK multi-modules is described below. All mounting hardware is included with the multi-modules.
- Insert the tab of the module into the rear slot on the mounting plate.
- Lay the back of the board against the two standoffs.
- Skip to step 4 if you are mounting a second module into the IDP-ACB. If mounting only one module, secure the option module to the bracket with two 4-40 screws.
- Address and wire the module as described in the compatible fire alarm control panel installation manual.
- Install the 1.25” standoffs through the first module into the mounting plate.
- Insert the tab of the second module into the front slot on the mounting plate.
- Lay the back of the board against the two standoffs.
- Secure with two 4-40 screws.
- Address and wire the module as described in the compatible fire alarm control panel installation manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>