wesecuu A1qzCpedkIL Wireless Pan Tilt IP Camera User Guide

Wireless Pan-tilt IP Camera

Interface description

This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details are subject to the receipt.This manual is only for the installation instructions of this series of equipment)

Wireless Pan-tilt IP Camera

1. Reset button
   The working state of the device, long press 5 seconds to restore the factory settings, the camera will have a voice prompt broadcast.

2. SD card slot
   TF card, storage video and playback video.

3. DC power supply

Installation and placement

Wireless Pan-tilt IP Camera

Set Up Your Camera

http://www.dvr163.com/download/indexm.php

Note: For iOS system, it requires iOS 9.0 version or above For Android, Android 5.1 or above

Account register and login
Open the app, and log in with your EseeCloud ID If you don’t have an account, create one first.

Bluetooth adding process with network
Ensure Bluetooth is enabled on your phone before adding the camera. Do not turn it off during the process. Follow prompt instructions to enable Bluetooth if needed.

1. Power on the Bluetooth camera, open the “EseeCloud”” app, tap the “+” icon, and scan the QR code.

2. Select the camera from the pop-up, tap add. If no pop-up, scan the camera’s QR code.

3. Connect the camera to a 2.4GHz WiFi, enter the password, tap Next.

4. Set a name for the camera after successful network configuration.

Add camera by WiFi configuration

Tap “Other Add Methods” on the scan code interface, select “Camera Scan QR Code to Add.”
Check the camera indicator, tap Next when it’s on.

Select the WiFi, enter the password, and tap Next. (5Ghz not supported)
Follow the instructions in the picture, scan the QR code with the camera, and tap the button below after hearing the camera sound.

Once the network configuration is successful, name the camera.

Help FAQ

Q1: Why is the pairing network unsuccessful?

1. Please make sure that the distance among the camera, the router and the mobile phone should be close enough when configuring the network.
2. Please make sure that the WIFI signal connected to the mobile phone must be 4G, not a 5G WIFI signal.
3. Please check whether the WIFI name and password are
4. Please long press the reset button for 5 seconds and try again after restoring the camera to the factory settings.
   

Q2: Why is there no playback?

1. Make sure that the TF card has been inserted into the camera and try to turn on/off the camera.
2. Enter the camera settings menu to check the storage status ‘in good condition’ ( if the status is abnormal, click to “Format the memory card”.)

Q3: Why my phone does not have an alarm push function or two way audio?

1. Check your mobile phone permission settings, and make sure that enable the notification permission of “Esee Cloud” App.
2. Open your phone’s Settings > Apps and Notifications, select Apps and Notification Management respectively, find the “Esee Cloud” app, and turn on all permission.

Q4: Why is the camera offline?

1. It may caused by router WIFI signal interference or network reasons. Power off and restart the optical modem, router or camera.
2. The camera maybe too far away from the WIFI router, try to get the camera next to the WIFI router.
3. Whether the WIFI password has been changed, try to reset the camera and try pairing again.

After Service

1. Thanks for your purchase and support, we appreciate all your valuable feedback.
2. If you have any questions about our products, please feel free to contact us.
   Toll Free: +1 888 971 6718
   Email: serviceus@wesecuu.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>