OREI UHD-IPC230-K 4K HDMI Splitter Extender Transmitter User Manual
- June 14, 2024
- OREI
Table of Contents
UHD-IPC230-K 4K HDMI Splitter Extender Transmitter
ipcolor 4K @60Hz 18Gbps 4:4:4
HDR HDMI 1X8 Splitter Extender
Over 70Meter Caté
USER MANUAL
Thank you for purchasing this produc t
For optimum performance and safety, please read these instructions care-fully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrincal components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of
surge protec – tion systems is highly recommended in order to protect and
extend the life of your equipment.
Registration page
Please Activate your warranty by registering our product through the link
Technical Support
Need Help?
below – www.orei.com/register
Our experienced Technical Support Team is here for you to answer your
questions, give technical advice or help troubleshoot your project to get you
installed on time and on budget. Call, email or chat with us now, OREI Live
Technical Support Hours US team (US/Canada/Mexico): Monday-Friday, 9 am. – 6
p.m. Central Time Support Email – info@orei.com
|Support Number – 877-290-5530 or Chat
Live on www.orei.com
Send us an instant message now. Our Technical Support Team will respond
momentarily. Available during live support hours.
Caution
The extender need to follow direct interconnection method CAT cable
Direct interconnection method
The extender will go into protection mode automatically and no video out when
using cross interconnection method CAT cable.
Cross interconnection method
Introduction
The ipcolor 4K @60Hz 18Gbps 444 HDR HDMI 1X8 Splitter Extender Over 70Meter Cat6 is a1 input 8 outputs splitter extender kit, which integrates the functions of distribution and extension. It distributes 1 HDMI input signal to 8 identical signal outputs, extends these signals up to 70 meters, and supports 4K@60Hz resolution It also supports bi-directional IR passback, RS-232 control and other functions. It is sitable for studios, multimedia classrooms, rail transit, etc.
Features
- Zero latency transmission.
- splitand extend one HDMI input signal to eight identical network output signals.
- Support up to 4K@60Hz resolution.
- Transmission distance up to 70 meters by using Cat6/6A/7 cables.
- Support bi-directional IR passback.
- The transmitter supports HDMI loop out.
- The receiver can output the digital audio of the TV or source device from the S/PDIF port.
- Support EDID passthrough or manually set the EDID of the product.
- Support RS-232 command control.
- Surge Protection, Lightning Protection, ESD Protection, M. Equipped with rack mount ears.
Package Contents
1x HDMI splitter extender TX
8x HDM I splitter extender RX
1x User manual
1x DCI2V/3A
8x DC5V/2A
1x Terminal block (RS-232)
1x IR blaster extension cable
8x IR Receiver extension cable
36x Mounting brackets 72x Screw
Function setting
The default configuration is as follows
RS232 settings
Baud rate: 9600
Data bits: 8
stop bits:T
Parity: 0
| Control Commands | Function Descriptions |
|---|---|
| ES XX Onf [Enter] | Turn on the network signal output port(s), choose frommOV |
to “08° (the network ports from right to left are: 01, 02, 03, 04,
05,06,07,08.);”AII” means al I four ports
ES XX Off [Enter]| Turn off the network signal output port(s), choose from”01′
to “08° (the network ports from right to left are: 01, 02, 03, 04,
05,06,07,08)AII” means al I four ports
Reset [Enter]| Restart the device
Recover (Enter]| Restore device factory settings
Baud XX [Enter]| Set the baud rate value:9600 (default), 19200, 38400,
57600,115200
Function Description| Trun on network signal output port 08
---|---
Return Val ues| Received successfully| ES 08 On OK
!Receive failed| ES 08 On FAIL
Control Command| ES All Off [Enter]
Function Description| Turn off all the network signal output ports
Return Values| Received successful ly| ES Al I Off OK
Receive failed| ESAII Off FAIL
Control Command| Reset [Enter]
Function Description| Restart the device
Return Values| Received successfully| Reset OK
Receive failed| Reset FAIL
Control Command| Baud19200 [Enter]
Function Description| Set the baud rate value:19200
Return Val ues| Received successful ly| Baud 19200 OK
Receive failed| Baud 19200 FAIL
Note that you need to press the ‘Enter’ key to send the control command.
EDID settings:
There are 16 built-in EDIDs in the product, which can be switched through the
DIP switch. The upward DIP switch indicates “I”, and the downward DIP switch
indicates’0″
| Switch Status | E DID Information |
|---|---|
| 1 | 2 |
| 0 | 0 |
| 1 | 0 |
| 0 | 1 |
| 0 | 0 |
| 0 | 0 |
| 1 | 1 |
| 1 | 0 |
| 1 | 0 |
| 0 | 1 |
| 0 | 1 |
| 0 | 0 |
| 1 | 1 |
| 1 | 1 |
| 1 | 0 |
| o | 1 |
| 1 | 1 |
Auto output at a resolution compatible with all displays
Specifications
Technical Parameters
| Item | Specification |
|---|---|
| Transmission protocol | ipcolor |
| Distribution mode | 1 IN 8 OUT |
| Transmission distance | CAT6/6AnV0m |
| H DMI signal | HDMI 2.0, HDCP 2.2 |
| HDM I Resolution | 480i©60Hz, 480p©60 Hz, 576i©50Hz, 576p©50Hz, |
720p©50/60Hz,1080i©50/60Hz, 1080 p050/6 0 Hz, 1280×960, 1280×8 00,128 OX768,
1680×1050,1360×768,1366×768,1600×900, 1024×768, 800×600,
3840×2160@24/25/30/50/60 Hz, 4096×2160024/251-1z
Audio formats| LPCM/DTS-HD/DTS-Audio/Dol by Digital 5.1
IR| Bi-directional IR passback (20-60khz)
RS-232| 3 pin TxD-RxD-GND, follows R5-232 levels
Working temperature| -20-60°C
Storage temperature| -30-70°C
Humidity (no condensation)| 0-90% RH
Protection| ES D protection la Contact discharge level 3 lb Air discharge
level 3 Implementation of the standard: IEC61000-4-2
Lightning protection
Surge protection
Power supply| TX: DC12W3A RX:DC5W2A
Power consumption| TX<24W RX 4W
Material| Aluminum alloymaterial +crystal panel
Color| Black
Weight| TX:724g RX: 210g
Dimension| TX: 260.00(L)x120.00(W)x 23.50(H )mm RX:106.0(Qx 99.0(W) x26.2(H)mm
Operation controls and functions
Transmitter
- Powerindicator: The indicator will tur blue when the power is turned on
- EDID DIP switch: Set output resolution through EDID DIP switch
- Ir in Connect with IR receiver extension cable
- IR out: Connect with IR blaster extension cable
- RESET: Restart the device
- R34S output port: Connect with Cat6/6A/7 network cables
- HDMI output port : Connect with HDMI display device with HDMI cable
- HDMIinput port : Connect with HDMI soLirce device with HOMI cable
- RS-232 Port : Connect with the external device to control the transmitter
- Power: Connect with DC 12V/3A power adapter
Receiver
- Reset button: Press to restart the device.
- Audio switch: Choose to decode audio from HDMI or ARC output from fiber optic interface
- R345 signal input: Connect with network cable
- Power/Signal indicator: When there is power and no HDMI signal, the indicator will flash, when there is HOMI signa, the indicator willlight solid biue
- DCSV input: Connect with DC5V/2A power adapter
- R345 signal output: Connect with network cable
- S/PDIFout: Output digital audio signal
- HDMI output: Connect with HDMI display device
- IRin: Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IRout: Connect with IR blaster extension cable, please get closer to the source device while using
Connection Diagram
Description
Follow us on Youtube and Facebook
https://www.facebook.com/OreiProducts/
https://www.youtube.com/channel/UCadsKVc
ipcolor 4K @60Hz 18Gbps 4:4:4
HDR HDMI 1X8 Splitter Extender
Over 70Meter Caté
www.orei.com
Documents / Resources
| OREI
UHD-IPC230-K 4K HDMI Splitter Extender
Transmitter
[pdf] User Manual
UHD-IPC230-K 4K HDMI Splitter Extender Transmitter, UHD-IPC230-K, 4K HDMI
Splitter Extender Transmitter, HDMI Splitter Extender Transmitter, Splitter
Extender Transmitter, Extender Transmitter, Transmitter, Transmitter UHD-
IPC230-K
---|---