EAST WEST FURNITURE XT72 Wooden Table Standard Height Instruction Manual
- June 14, 2024
- EAST WEST FURNITURE
Table of Contents
EAST WEST FURNITURE XT72 Wooden Table Standard Height Instruction Manual
<http://media.eastwestfurniture.net/VID/XT.mp4>
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully.
Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment. Please separate, identify, and
count all parts and metal hardware. Compare with part list to be sure all
parts are present.
If hardware is missing or you have difficulty assembling this product, please
call for us.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
STEP 1
Attach legs (B) to the Cross bar (C) with Bolts (1). Tighten with the Allen
Key (4).
Note: DO NOT tighten any of the bolts, until the Table is assembled.
STEP 2
Attach legs (on Step 1) to the Top (A) with Bolts (1) and washers (2), (3).
Tighten with the Allen Key (4).
Note: Tighten the all bolts on the Step 1.Then Attach Snap legs (D) to the
Legs.
