RESTMO 0-HT-8 2 Zone Automatic Water Timer User Manual
- June 14, 2024
- RESTMO
Table of Contents
2-I0NE RUTOMATIC WATER TIMER
USER MANUAL
0-HT-8
WARRANTY
Restmo provide one-year worry-free warranty. For any warranty claims within
one year from the original order date, please email your order ID to Restmo
Support and we will respond within 24 hours.
support@restmo-link.com
WARNING
- Only use with clear cold water.
- When expecting freezing temperatures, timer should be removed from hose/faucet and stored indoors to avoid potential freeze damage.
- Filter can prevent dirts and extend product lifetime. Clean filter regularly and replace if worn.
(1) DIAL
(3) +/DELAY BUTTON
(5) ZONE BUTTON
(7) ZONE LEFT
(9) INLET| (2) OK BUTTON
(4) -IMANUAL BUTTON
(6) ZONE RIGHT
(8) LCD SCREEN
(10) FILTER
---|---
- DIAL: Rotate to set up watering programs
- OK BUTTON: Press to confirm setups
- +/DELAY BUTTON: Press to set up time, system, delay watering
- -/M BUTTON: Press to set up time, system, manual watering
- ZONE BUTTON: Press to switch 2 zones (left and right)
AUTO | Timer turns on/off according to preset programs |
---|---|
OFF | Timer is off |
TIME | Set up current time |
P1/P2IP3 | Set up 3 separate watering programs |
INTVLIWEEK | Interval or weekly program |
ZONE LIR | Zone left/right |
START TIME | Set up what time to start watering |
HOW LONG | Set up watering duration |
HOW OFTEN | Set up watering frequency |
EVERY | Watering program runs every XX hours or XX days |
NEXT | Next watering program |
Watering program runs on this day | |
Timer is on | |
Manual watering | |
Delay watering |
SPECIFICATION
Dual Program Mode ………………………..Interval or Weekly
Watering Frequency (Interval) ……………………..Our to 30 days
Watering Frequency (Weekly) …………………………….. MOnday to Sunday
Watering Duration …………………………….. min to 4hrs 59mins
Separate Program …………………….. UP (03
Independent Outlets …………………………. 2
Inlet Thread …………………………… 3/4 NH Female (pure brass)
Outlet Thread ………………………….. O/4 NH Male
Working PreSSUFe …………………………. O 7 LZOPSI (0.5 – 8Bar)
Maximum FIOW Rate …………………………… 1OGPM (35LPM)
Working Temperature …………………………….. 007 122 F (3 – 50°C)
Battery …………………….. Alkaline Batteries (not included)
Battery Life ……………………………. APPIOX. 1 Year
BATTERY INSTALLATION
- Pull out the battery tray on the back of timer.
- Insert two AA alkaline batteries and replace the tray.
- Ensure batteries are fully inserted by correct directions.
Low Battery Indicator:
Replace with new batteries if low battery indicator displays.
TIMER SETUP
SET CURRENT TIME
- Tum DIAL to TIME.
- Press +/- buttons to choose 12H or 24H. Press OK button and move to hour/minute setup.
- Press +/- buttons to set the current hour and minute. Press OK button and move to day setup.
- Press +/- buttons to set the current day (Monday to Sunday).
- Turn dial to save changes.
SET AUTO WATERING PROGRAMS
-
Tumn DIAL to P1.
-
Press ZONE button to switch zone left/right.
-
Press +/- buttons to choose watering mode (INTVL/WEEK/OFF).
-
A. If you choose INTVL/WEEK in step 3, press OK button and move to START TIME setup. Go to step 5.
4B. If you choose OFF in step 3, go to step 8 directly.
-
Press +/- buttons to set the watering start time. Press OK button and move to HOW LONG setup.
-
Press +/- buttons to set the watering duration. Press OK button and move to HOW OFTEN setup.
-
A. If you choose INTVL (interval) in step 3, press +/- buttons to set the watering frequency from 1 hour to 30 days.7B. If you choose WEEK in step 3, press + button to select the watering days, press – button to unselect, from Monday to Sunday.
-
Turn dial to save changes.
-
Repeat all above steps to set up P1/P2/P3 of zone left/right.
Note:
- In INTVL mode, the options which “HOW LONG” are greater than “HOW OFTEN” will be automatically skipped.
- In WEEK mode, at least 1 watering day should be selected in “HOW OFTEN”.
AUTO WATERING
After P1/P2/P3 of zone left/right are all set up, turn DIAL to AUTO and timer
will start auto watering.
-
When watering is off, LCD screen flashes between the current time and the start time & duration of the next watering program of zone left/right. Press OK button to check all the 3 programs setups of zone left/right.
-
When watering is on, LCD screen flashes between the current time and the remaining watering Iime‘ lights up.
MANUAL WATERING
Manual watering allows you to water without interrupting the preset programs.
To access, follow below steps
- With DIAL at AUTO and watering is off, long press MANUAL button (3 secs) to enter manual watering setup. lights up.
- Press ZONE button to select zone left/right, or both 2 zones.
- Press +/- buttons to set up manual watering duration. Press OK button to confirm. lights up.
- Manual watering starts. LCD screen flashes between the current time and the remaining watering time.
- To cancel manual watering, Turn DIAL to OFF and back to AUTO.
DELAY WATERING
Delay watering allows you to postpone the watering programs for a period of
time. To access, follow below steps:
- With DIAL at AUTO and watering is off, long press DELAY button (3 secs) to enter delay watering setup. lights up.
- Press +/- buttons to select a delay of 24hrs, 48hrs or 72hrs. Press OK button to confirm.
- Delay watering starts. LCD screen flashes between the current time and the remaining delay time.
- To cancel delay watering, turn DIAL to OFF and back to AUTO.
(Now is 2:26PM and timer is on delay mode. Timer will resume after 23hrs 58mins.)
STOP WATERING
Turn DIAL to OFF and timer keeps off.
TROUBLESHOOTING
TIMER DOES NOT WATER AS PRESET. CHECK IF:
- Timer DIAL is set to AUTO. Hose faucet is on.
- TIME is set to the correct time (AM and PM).
- Program mode, start time, how long and how often for all the 3 programs (P1/P2/P3) of zone left/right are set as desired.
- Delay watering is on.
HOSE CONNECTION LEAKS. CHECK IF:
- The filter of timer and hose are both installed correctly.
- The faucet or hose is 3/4″ NH thread.
- Water pressure is 8-120PSI (0.5-8Bar).
TIMER VALVE WON’T TURN ON/OFF. RESET THE VALVE:
Step 1: Attach timer on a faucet and open the faucet to max.
Step 2: Manually turn timer (both 2 zones) on for more than 5 secs and turn it
off. Repeat it more than 5 times until water get through properly.
TIMER DECREASE WATER PRESSURE:
This timer is built in with a solenoid valve. Technically, all solenoid valves
decrease water pressure. Restmo also has ball-valve timers that do not
decrease water pressure.
If you are not satisfied with the decreased water pressure, please contact us
directly for more details about ball-valve timers.
Garden Watering Made Easy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>