VEVOR SC-7XD Hot Dog Machine User Manual
- June 14, 2024
- VEVOR
Table of Contents
VEVOR SC-7XD Hot Dog Machine
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.
IMPORTANT SAFEGUARDS
This manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the uses will comply with these codes.
Please read ALL the instructions before using your machine.
- Make sure the voltage in your outlet is the same as the voltage indicated on the appliance’s rating label.
- Do not let children and minors get close to or touch the machine.
- Do not touch the hot surface directly with your hands. Always operate with handle or knob.
- To prevent electrical shock, do not immerse the cord or plug into water or other liquids.
- Do not immerse the appliance in water or any other liquid.
- Unplug the machine from the outlet when not in use and before cleaning. Cool the appliance before installing or removing parts and before cleaning.
- Cool down the HOT parts before operation.
- Do not operate the device with damaged cord or plug, malfunction or with any mechanical damage. Send it to your nearest authorized service centre for examination and repair (ONLY technicians should open up the unit).
- Using any accessories or attachments that are not provided or recommended by the manufacturer may cause injury.
- If the machine is not to be used for a long period of time, unplug it, clean and cover it and store it in a dry and safe place.
- Do not leave the power cord hanging over the edge of table or counter or let it come into contact with any hot surfaces.
- Do not place the unit on or near hot air, electric burners or heaters.
- Always switch off the power before plugging in or unplugging. Hold the plug instead of pulling on the cord.
- Do not apply this unit to any other purposes than the indicated usage.
- Do not use it outdoors or for commercial purposes.
- KEEP IT OUT OF CHILDREN’S REACH.
- DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
- Never leave it unattended while in use.
- Always check that this machine is plugged into a grounded outlet with the appropriate electrical supply. Ensure that the wall outlet being used is properly grounded. If not, you must install a grounded outlet. Have the work performed only by a certified electrician who is properly qualified to meet local safety and electrical codes.
- Ensure that the power outlet, plug and cord being used are in good working condition. Damaged components should be repaired by a certified electrician who is qualified to meet local safety and electrical codes. Even if your power cord is functioning properly, keep it away from water and avoid letting it run over carpets or heating devices.
- Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
- Extreme caution must be taken when moving an appliance containing hot oil or other hot liquids.
- Do not operate the machine in an appliance garage or under a wall cabinet. Always unplug the unit from the electrical outlet when storing in an appliance garage. Otherwise, it would cause a risk of fire, especially if the machine touches the garage wall or the door touches it as it closes.
- Type X attachment: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the machine alone. Cleaning and user maintenance shall not be made by children without supervision.
PRODUCT PARAMETERS
MODEL NO.
|
Region
| Voltage| Input Power| Plug Type
---|---|---|---|---
SC-5XD| North America| AC110-120V 60Hz| 750W| American PLUG
SC-7XD| North America| AC110-120V 60Hz| 1050W| American PLUG
SC-11XD| North America| AC110-120V 60Hz| 1650W| American PLUG
NOTE:
- The voltage used for this device must be the same as the power supply voltage.
- Users need to install it near the power switch and fuse.
- If the machine is not powered, remove the plug from the electrical outlet and check whether the fuse is blown.
CIRCUIT DIAGRAM
-
MODEL NO.: SC-5XD
-
INPUT: AC110-120V 60Hz
-
SB: Power Switch
-
FR1: Thermostat-1
-
FC1: Heating Tube Group-1
-
HL1: Heating Indicator-1
-
M : Electric Machiner
-
FR2: Thermostat-2
-
FC2: Heating Tube Group-2
-
HL2: Heating Indicator-2
-
FU: Fuse(10A)
-
MODEL NO.: SC-7XD
-
INPUT: AC110-120V 60Hz
-
SB: Power Switch
-
FR1: Thermostat-1
-
FC1: Heating Tube Group-1
-
HL1: Heating Indicator-1
-
M : Electric Machiner
-
FR2: Thermostat-2
-
FC2: Heating Tube Group-2
-
HL2: Heating Indicator-2
-
FU: Fuse(15A)
- MODEL NO.: SC-11XD
- INPUT: AC110-120V 60Hz
- SB: Power Switch
- FR1: Thermostat-1
- FC1: Heating Tube Group-1
- HL1: Heating Indicator-1
- M : Electric Machiner
- FR2: Thermostat-2
- FC2: Heating Tube Group-2
- HL2: Heating Indicator-2
- FU: Fuse(20A)
PRODUCT COMPONENTS
Note: The location of the core components of these three machines is the same!
- Power Switch
- Temperature Knob (Front)
- Heat Light (Front)
- Temperature Knob (Back)
- Heat Light (Back)
- Pan
- Fuse
- Protective Earthing
- Power Socket
Note: The location of the core components of these three machines is the same!
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|
| Name | Screw M4x8 | **** |
Screw M5x16
| M5 Nylon Support| M5 Silicone Ring| Glass Flap Door| Aluminum Strip| ****
Side Glass
| ****
Base
| ****
Curved Glass
Quantity| 4 PCS| 4 PCS| 4 PCS| 4 PCS| 1 PCS| 1 PCS| 2 PCS| 1 PCS| 1 PCS
NO.| 10| 11| 12| 13| 14| 15| 16| 17| 18
---|---|---|---|---|---|---|---|---|---
Name| Glass fastener Front| ****
Nut
| ****
Screw M4x6
| ****
Screw M4x12
| ****
Screw M5x16
| Glass fastener Right-Front| Glass fastener Left-Front| Glass fastener Right-
Rear| Glass fastener Left-Rear
Quantity| 1 PCS| 4 PCS| 3 PCS| 2 PCS| 4 PCS| 1 PCS| 1 PCS| 1 PCS| 1 PCS
OPERATING INSTRUCTIONS
Before using the appliance for the first time, peel off any promotional materials and packaging materials, and check that the cooking plates are clean and free of dust. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil. When your appliance is heated for the first time, it may emit slight smoke or odor, which is normal for many heating appliances, and will not affect the safety of your appliance.
- Place the machine on a clean, dry, level surface near a plug base outlet.
- Plug the cord into the machine power socket.
- Plug the cord into the wall outlet.
- How to test your machine: Turn on the power switch, the indicator light is on; turn on the motor switch, the rollers rotate. Turn the thermostat knob clockwise to align the knob on the temperature scale with the red triangle on the panel, the heating indicator light is on, and the rollers start to heat. When the temperature reaches the set value, turn the knob clockwise to about 302°F (150°C). At this time, the heating indicator light will go off, which means the it has reached the set temperature.
- Place the pre-prepared sausages parallelly in the middle of the two rollers, then the sausages will rotate in opposite directions. Please do not place the sausages too close together, leaving about 0.4 in (10 mm) at the end of each roller.
NOTE:
- Every time you turn on the machine for the first time, you must first turn on the heating switch to preheat, and then turn on the rotary switch to prevent the motor oil from solidification.
- Opening of the bottom pan or both sides is not permitted, in case that you are eligible to do so.
- Usually the baking temperature should be appropriate 248°F-320°F(120-160°C).
- When heating, your hands are not allowed to touch the steel roller to prevent scalding.
- When connecting or unplugging the plug, it should be disconnected from the total external power supply.
- Keep your hands dry when plugging the cord.
TIPS & HINTS
- To save electricity and reduce the heating time, you can naturally defrost the sausages or heat it by microwave oven before.
NOTE: The pan under the rollers is used to catch drops of oil, it can also be used to preheat the sausage, but it’s not appropriate to put the grilled sausages into it.
CLEANING AND MAINTENANCE
- Once you have finished baking, remove the plug from the electrical outlet. Leave the machine to cool down completely before cleaning.
- The rollers should be cleaned every 4-5 hours of grilling.
- For the exterior, wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh pad.
- Any other servicing should be provided by an Authorized Service Representative.
STORAGE
- Always unplug the machine before storage.
- Always make sure the machine is cool and dry before string.
Made in China
Manufacturer: Guangdong Shuangchi Dining Equipment CO., LTD. Address: No.30 Jiahua Road, Jiafu Industrial Park, Yinzhan, QingchengDistrict, Qingyuan, Guangdong,China
Support and E-Warranty Certificate https://www.vevor.com/support
FREQUENTLY ASKED QUESTIONS
What is the VEVOR SC-7XD Hot Dog Machine?
The VEVOR SC-7XD is a hot dog machine designed for cooking and warming hot dogs in a commercial or household setting. It is commonly used in concessions, food stalls, and events to efficiently prepare and serve hot dogs.
How many hot dogs can the VEVOR SC-7XD Hot Dog Machine cook at once?
The VEVOR SC-7XD typically has multiple rollers and can cook several hot dogs simultaneously. The exact capacity may vary, and users should refer to the product specifications for information on the number of hot dogs it can accommodate.
Is the VEVOR SC-7XD suitable for commercial use?
Yes, the VEVOR SC-7XD is designed for commercial use and is commonly found in settings such as food stands, concession stands, and other commercial food establishments. It offers a convenient and efficient way to prepare hot dogs for customers.
What is the power source of the VEVOR SC-7XD Hot Dog Machine?
The VEVOR SC-7XD is typically powered by electricity. It is designed to be plugged into a standard electrical outlet, providing a reliable power source for cooking hot dogs.
Can the VEVOR SC-7XD be used for warming buns?
Yes, the VEVOR SC-7XD often comes with additional features, such as a bun warmer or storage area. This allows users to warm buns while simultaneously cooking hot dogs, providing a complete hot dog preparation solution.
Is the temperature of the VEVOR SC-7XD adjustable?
Yes, the temperature of the VEVOR SC-7XD is often adjustable, allowing users to control the cooking temperature based on their preferences and the type of hot dogs being prepared.
What types of hot dogs can be cooked on the VEVOR SC-7XD Hot Dog Machine?
The VEVOR SC-7XD is versatile and can typically cook a variety of hot dog sizes and types, including regular-sized hot dogs, sausages, and other similar products. Users can refer to the product specifications for compatibility details.
Is the VEVOR SC-7XD easy to clean?
Yes, the VEVOR SC-7XD is generally designed to be easy to clean. Many models feature removable parts, such as rollers and drip trays, that can be easily cleaned and maintained to ensure hygiene and food safety.
Does the VEVOR SC-7XD Hot Dog Machine come with a warranty?
Many VEVOR SC-7XD machines come with warranty coverage, providing users with protection against defects or malfunctions. The warranty typically range from 1 year to 2 years.
Can the VEVOR SC-7XD be used for events and catering?
Yes, the VEVOR SC-7XD is suitable for events and catering services. Its compact and portable design makes it convenient for on-the-go food service, allowing users to serve hot dogs at various locations.
What is the cooking time for hot dogs on the VEVOR SC-7XD Hot Dog Machine?
The cooking time for hot dogs on the VEVOR SC-7XD may vary based on factors such as the type of hot dogs and the desired level of cooking. However, these machines are designed for relatively quick cooking, providing efficiency in food preparation.
Is the VEVOR SC-7XD suitable for indoor and outdoor use?
Yes, the VEVOR SC-7XD is versatile and can be used both indoors and outdoors. Its design and construction are often suitable for various environments, making it adaptable to different food service setups.
Can the VEVOR SC-7XD be used for other types of sausages?
Yes, the VEVOR SC-7XD is typically designed to accommodate various types of sausages, expanding its utility beyond traditional hot dogs. Users can experiment with different sausage sizes and varieties based on their preferences.
What safety features does the VEVOR SC-7XD Hot Dog Machine have?
The VEVOR SC-7XD may come with safety features such as a built-in fuse, non- slip feet, and a safety cover to protect users during operation. Users should refer to the product specifications for information on specific safety features.
Can the VEVOR SC-7XD Hot Dog Machine be used for continuous cooking?
Yes, the VEVOR SC-7XD is designed for continuous cooking, allowing users to cook multiple batches of hot dogs without extended cooldown periods. This makes it suitable for busy food service environments.
Is technical support available for the VEVOR SC-7XD Hot Dog Machine?
Yes, manufacturers typically provide technical support and customer assistance for the VEVOR SC-7XD Hot Dog Machine. Users can contact the manufacturer or authorized service centers for help with setup, usage, and troubleshooting.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK: VEVOR SC-7XD Hot Dog Machine User Manual