junlit YSP102 Remote Control Smart Plug Outlet Instruction Manual
- June 14, 2024
- junlit
Table of Contents
junlit YSP102 Remote Control Smart Plug Outlet
Indicator Light Status
Safety Information
Risk of Electric Shock: Electricity can cause personal injury and
property damage if handled improperly. If you are not sure about any part of
these instructions, please seek professional assistance from a qualified
electrician.
A Warnings
- Turn off the power at the circuit breaker and test that power is off before wiring.
- Check supported maximum wattage rating: 1250W.
- Prepare Other Tools You’ll Need
- Screwdriver
- Plier
- Electrical Tester
Installation
Note
- Make sure that the power at the circuit breaker is off before wiring.
- A neutral Wire is required. Confirm the wall box contains a Neutral Wire (typically white).
- If the wall box doesn’t have a Neutral Wire, please try another location in your home or call a professional electrician to install the switch.
- The wire colors indicated in this manual are the usual colors and may differ in some homes.
- Ensure the wire conductors are securely fastened to each wire.
- If you don’t have any wiring experience, please call a professional electrician.
STEP 1
Turn off the circuit breaker and use the electrical tester to test the power.
Ensure the switch is off before wiring.
STEP 2
- Remove the existing wall plate; Turn on the power at the circuit breaker and use an electrical tester to check which wire is line/load wire
- The tester will flash and/ or chirp when it comes close to a load/line wire.
- Turn off the power at the circuit breaker and use the electric tester to test if the power is off, and then pull the existing switch out
- Label the line/load wire and other wires
- Disconnect the wires from the existing switch with the plier.
- Follow the wiring diagram to connect the switch wires to the wires in the wall box with the wire conductors.
STEP 3
Mount the switch with the provided screws and snap the wall plate on it.
STEP 4
Turn the power back on at the circuit breaker.
STEP 5
Switch the light on.
Add Devices
- Download the Smart Life APP
- Registration or Log-In
- Download the “Smart Life” Application.
- Enter the Register/Login interface; Tap “Register” to create an account by entering your phone number.
- Verification code and “Set password”. Choose “Log in” if you already have a Smart Life account.
- Configure the APP to the Switch
Preparation : Ensure the switch has connected to electricity: Ensure your phone has connected to the WiFi router and is able to connect to the internet.
Note:
This switch only supports a 2.4G network. If you have connected 5G network,
please disconnect the 5G network first.
- Tap the icon “+” on the top right corner to Select Device
- Type: tap “all” and choose “Wall Switch”
Default Configuration Mode
- Press and hold the manual switch for 5 seconds until the blue indicator light blinks quickly.
- Tap “Confirm indicator rapidly blink”; Enter WiFi
- Password: Wait for completing the connection.
- Note: You can search the devices via Bluetooth.
- Devices have been added successfully; If you can only find one switch, please start the above steps to configure the other switch again.
APP Mode
- If you cannot configure successfully with the default mode, please try to connect with AP Mode.
- Tap “AP Mode” in the top right corner.
- Press and hold the manual switch for 5 seconds, you can see the blue indicator light blinks quickly.
- Then press and hold for 3s again until the indicator light blinks slowly.
- Tap “Confirm indicator slowly blink”
- Enter the WiFi Password.
- Open WLAN settings; Connect with “SmartLife-xxxx”
- Back to the APP continue to add the device and wait to complete the connection.
Set your Echo Speaker by Alexa APP
- If you have finished installing Smart Life then open Amazon Alexa App; Sign in to your Alexa account and enter your password.
- Click the menu on the left corner-click “Settings”; Choose “Set up a new device” [choose a device, like
- Echol Note: When the below page appears, long press the small dot on your Echo device until the light turns yellow. Then click Continue on App.
Note:
At this moment, the mobile phone can not open a variety of VPN software.
- Choose your own WiFi and wait for a few minutes. After an introduction video, click the next step, and it will enter the Home page automatically. Now the Echo has connected to WiFi successfully.
Enable Smart Life Skill in Alexa APP
-
Choose “Skills” in the options bar, and then search “Smart Life” in the input box.
-
Select Smart Life in the search results, and then click “Enable Skill”.
-
Then input the user name and password of the Smart Life APP that you had previously registered.
Control the Light Switch by Voice
After the above operation is successful, you can control the Light Switch via
Echo.
Discover Devices
Firstly, you need to say to the Echo: “Echo (or Alexa), discover my devices. ”
Echo will start to find the device that is added to the Smart Life APP. It
will take about 20 seconds, then Echo will tell you the result. You can also
click “Discover devices” in the Alexa APP. then it will show the devices that
have been found successfully.
Control Device by Voice
Note : The name of the device must be consistent with the addition of the
Smart Life APP. You can also group the Light Switch and give instructions to
control them together.
Note:
Echo is one of the wake-up names, which can be any of the three names
[Settings): Alexa, Echo, Amazon.
Support Skill List
- You can control the device by instructions like:
- “Alexa (or Echo], turn on the Light Switch”
- “Alexa (or Echo), turn off the Light Switch”
Google Assistant-Activate Smart Life in Google Home APP
Preparation
- Have downloaded the Google Home App – compatible with Android (4.2 or higher| or 10S (8.0 or higher smartphones or tablets.
- Have registered your Google Account.
- Have paired Light Switch with Smart Life APP and named it with a recognizable name.
- Have finished setting up Google Home.
STEP 1
Open Google Home App: Tap”= ” on the upper left corner: Select “More Settings”
to enter the next interface.
STEP 2
Choose “Services” in the options bar and select “Smart Life” to enter the next
interface.
STEP 3
Tap “Link Account, then sign in to your Smart Life Account.
STEP 4
- Tap “Link Now”. , after your Smart Life account has been linked to
- Google Assistant, the smart devices will automatically appear. Command the Device through Your Voice After the above operation is successful, you can control the device via Google Home.
- Firstly. you need to say “OK Google, talk to Smart Life” to wake up the Smart Life. Then you can control the device by instructions like these:
- “Turn on the Light Switch”
- “Turn off the Light Switch”
Note
- After Smart Life has been wakened up, you can say “Cancel” or “Stop” to exit Smart Life or say “Nothing” when you hear
- “What can I do for you”. Then you can say “OK Google, talk to Smart Life” to start voice control.
Specification
Troubleshooting
Warranty
This product carries a one-year warranty from the purchase date. Please feel
free to let us know what we can do to assist you when you have any product
problems. Junlit customer service Email address;
supports@junlit.com
FAQs
What is the junlit YSP102 Remote Control Smart Plug Outlet?
The junlit YSP102 Remote Control Smart Plug Outlet is a smart home device designed to enable remote control and automation of electrical appliances. It allows users to control connected devices using a remote control or through smartphone applications, providing convenience and energy efficiency.
How does the unlit YSP102 Smart Plug Outlet work?
The junlit YSP102 works by connecting to your home's Wi-Fi network. Users can then control the connected devices remotely through a dedicated smartphone app or use a provided remote control. It offers features such as scheduling and voice control for added convenience.
Is the junlit YSP102 compatible with voice control systems?
Yes, the junlit YSP102 Smart Plug Outlet is often compatible with popular voice control systems like Amazon Alexa or Google Assistant. This allows users to control connected devices using voice commands.
What type of devices can be connected to the junlit YSP102 Smart Plug Outlet?
The junlit YSP102 is designed to accommodate a variety of electrical appliances, such as lamps, fans, heaters, and other devices that can be plugged into a standard wall outlet.
Can the junlit YSP102 be controlled remotely outside the home?
Yes, the junlit YSP102 Smart Plug Outlet allows users to control connected devices remotely from anywhere with an internet connection. This feature is especially useful for managing devices when away from home.
Is the junlit YSP102 easy to install?
Yes, the installation of the junlit YSP102 is typically straightforward. Users can plug it into a standard wall outlet and follow the provided instructions to connect it to their Wi-Fi network and set up remote control functionalities.
Does the junlit YSP102 Smart Plug Outlet support scheduling?
Yes, the junlit YSP102 often comes with scheduling features, allowing users to set specific times for connected devices to turn on or off automatically. This enhances energy efficiency and provides automation for daily routines.
Can multiple junlit YSP102 Smart Plug Outlets be controlled together?
Yes, many smart plugs, including the junlit YSP102, support grouping or scene features. Users can create groups to control multiple outlets simultaneously, making it convenient for managing devices in specific areas or rooms.
Is the junlit YSP102 compatible with smart home ecosystems?
The junlit YSP102 is often designed to be compatible with popular smart home ecosystems, allowing integration with other smart devices and systems for a cohesive smart home experience.
Does the junlit YSP102 Smart Plug Outlet have energy monitoring capabilities?
Some models of the junlit YSP102 may include energy monitoring features, allowing users to track the energy consumption of connected devices and make informed decisions for energy efficiency.
Is technical support available for the junlit YSP102 Smart Plug Outlet?
Many manufacturers offer technical support and customer assistance for the junlit YSP102 to address setup, usage, and troubleshooting questions.
Can the junlit YSP102 be used with a smart home hub?
Depending on the model, the junlit YSP102 may or may not require a smart home hub. Some models connect directly to Wi-Fi, while others may require a hub for integration into a broader smart home ecosystem.
What is the warranty period for the junlit YSP102 Smart Plug Outlet?
The warranty period for the junlit YSP102 may vary by manufacturer. It's recommended to check the product documentation or contact the manufacturer for specific warranty information.
Is the junlit YSP102 compatible with both iOS and Android devices?
Yes, the junlit YSP102 Smart Plug Outlet is typically designed to work with both iOS and Android devices, ensuring compatibility with a wide range of smartphones and tablets.
Can the junlit YSP102 be used for outdoor applications?
The junlit YSP102 is generally designed for indoor use. Using it outdoors may expose the device to environmental elements, potentially affecting its performance and durability. It's recommended to check the product specifications for guidance on outdoor use.
Is the junlit YSP102 Smart Plug Outlet designed for long-lasting use?
Yes, the junlit YSP102 is typically built to be durable and reliable, ensuring it can provide long-lasting smart control solutions for various household applications.
Download This PDF Link: junlit YSP102 Remote Control Smart Plug Outlet Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>