SwanStand 13S Portable Samsung Galaxy Z Flip Charging Stand User Manual
- June 14, 2024
- SwanStand
Table of Contents
Scout for elegance
SwansScout Portable
**Wireless Charging Stand
User Manual**
13S Portable Samsung Galaxy Z Flip Charging Stand
Product overview
Before using this product, please read this user manual thoroughly and take good care of it.
Product compatibility
Please consult the website’s images or text descriptions to find out which types of phones are compatible.
Product instructions
- To align the charging coil more accurately and improve the stability of the charging, it is recommended to stand the wireless charging pad up.
- Connect one end of the power cable to the USB-C port of the product and the other end to the charging adapter.
- Simply position your phone in the wireless charging area for charging to begin.
Indicator light guide
| Charging status | Charging | Fully charged | Abnormal Charging detected |
|---|---|---|---|
| Indicator ligh | Green light | Green light | Red light flashes |
Attention
- To achieve the fastest charging speed, please use charging cables and adapters that are compatible with QC 3.0/PD 3.0. Please note that using cheap or unknown source charging cables and adapters may damage your device. We recommend using products that comply with quality and safety standards.
- To ensure that the charging station works properly, the phone case should not exceed 5 mm.
Specification
| input: | 5V/3A 9V/2A |
|---|---|
| Charging phone output: | 10W (Max) |
**** Warning
-
Do not disassemble or change the internal structure of this product by yourself to avoid danger.
-
Please use this product in the temperature range of 0°C -40°C (32 °F-104 °F).
Do not use this product in high temperature and humid place to avoid equipment failure. -
Do not place metallic foreign objects in the wireless charging area.
-
Do not throw this product into the fire, otherwise may cause the equipment to catch fire or explode.
-
This product contains sensitive electronic components, including a battery, and can be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed.
-
Do not expose this product to high temperature or around heat generating devices such as heaters, microwave ovens, ovens, etc.
-
Do not allow children or pets to swallow this product to avoid injury or other hazards.
-
Radio waves generated by this product may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical device and this product. Consult your physician and medical device manufacturer for information specific to your medical device. Stop using this product if you suspect it is interfering with your pacemaker, defibrillator, or any other medical device.
-
Please comply with local regulations for the disposal of this product and its accessories, and support recycling operations.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two canditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains licence- exempt transmitter (s)/receiver (s) that
comply with innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that maycause undesired operation of the device.
Any changes or modifications not expressty approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated With
minimum distance 20cm between the radiator and your body.
Follow us to get the latest news and activities:
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>