Ohotter 01 Solar Security Light User Manual
- June 14, 2024
- Ohotter
Table of Contents
Ohotter 01 Solar Security Light User Manual
Solar Induction Light Manual
Specification
Name: solar induction light
Material: ABS
Light source: LED / COB
Battery: built-in 3.7V 2400mAh lithium battery
Waterproof: IP65
Delay time: 20-25 seconds
Solar panel: 5.5V 1.8W
Working mode: 3 modes
Sensing distance: 3-7m
Before use
Expose the light under sunshine for eight hours to ensure sufficient charge. Switch on before installation.
Installation
Install the light at the height of 3-5meters. Make sure it is exposed under sunshine and switch on.
Features
- Large capacity battery & unique low light mode to make it long lasting.
- Auto on/off and lighting mode switch.
- Simple structure, easy to install and maintain.
Fault removal
If the light does not work, please follow below:
- Check the switch, make sure it’s ON.
- Check and make sure the light is not in shade during daytime.
- Make sure the battery is charged. It takes a few hours to get it sufficiently charged.
Light mode
-
Press the switch button for the first time to enter Mode 1 :
When people come, the light turns on at 100% brightness. The light turns off 20 seconds after people leave.
-
Press the switch button for the second time to enter Mode 2 :
When people come, the light is at 100% brightness.The light is always on at 10% brightness 20 seconds after people leave.
-
Press the switch button for the third time to enter Mode 3 :
The light stays on at 30% brightness at night without infrared induction.
Various angles can be adjusted
Product List
Installation Instructions
Dear Customer:
If you need any help,please feel free to contact us,our email address:
You’ll receive our reply within 24hours. For all of Ohotter products, we offer 12-month warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>