Klein electronics B07HCMLTYY Pocket UHF 2 Way Radio User Manual
- June 5, 2024
- Klein electronics
Table of Contents
Klein electronics B07HCMLTYY Pocket UHF 2 Way Radio
Features
- Dual PTT
- Light
- Mic
- Speaker
- Antenna
- Side key PTT
- Channel+
- Channel-
- Power on/off Switch
- Volume Switch
- Earphone Interface
- Microphone Interface
- USB Interface
- Battery
NOTE: This equipment has been tested and found to comply with the limits for Class B devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Power On/Off
Long press the “Power On/Off” Key for 2 seconds to turn on/off the radio0.
See # 9 Power Button
Channel / Volume control
- Press UP or DOWN for channel options.
- Toggle the Switch on top of the radio.
CAUTION The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, Klein Electronics, Inc. radio generates RF energy that can possibly cause interference with other devices orm systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate transmitters in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control overtheir exposure.
Attention:
This radio complies with IEEE and ICNIRP exposure limits for
occupational/controlled RF exposure environment at operating duty factors of
up to S0% and is authorized by the FCC for occupational use only. An
appropriate warning label is affixed to all units. In order to comply with RF
exposure requirements, a minimum distance of 2.5cm, must be maintained when
held-to-face and body-worn operations are restricted to the approved original
accessories (belt clip)a minimum distance of 0 cm. Do not use this device when
the antenna shows obvious damage.
This product is in compliance to FCC RF Exposure requirements and refers to
the FCC website
https://apps.fec.gov/oetcf/eas/reports/GenericSearch.cfm Search for FCC ID:
U7GPKTPLUS to gain further information including SAR Values.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>