BLUETTI EB55 Portable Power Station 537Wh User Manual

BLUETTI EB55 Portable Power Station 537Wh

Thank You

• Thank you for making BLUETTI a part of your family.
• From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.
• That’s why BLUETTI has a presence in 70+ countries and is trusted by millions of customers across the globe.

Before You Begin

• The information contained herein is subject to change without notice.
• For the latest version, please visit https://www.bluettipower.eu/pages/manuals.
• The user manual contains instructions and notes on the operation and use of this unit.
• BLU ETTI recommends that you use genuine accessories from BLU ETTI.
• BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from BLUETTI.
• For your safety and benefit, please read carefully before using it and keep it handy for future reference.

Important Safety Instructions

• BLUETTI products are developed to be safe and reliable. Please read this guide for important safety information about your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper setup, use, and care for your device may cause damage to this unit and injury to yourself or others.

SAVE THESE INSTRUCTIONS!

• Always operate or store the unit in accordance with the specified temperature range.
• DO NOT expose the unit to fire, liquids, sweat, dirt, or other contaminants, as that may cause the battery to explode or leak flammable liquid or gas.
• DO NOT place the unit on an unstable or tilted surface.
• Make sure the place where you are using the unit is well-ventilated and spacious.
• Keep away from children and pets.
• DO NOT modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.
• Battery fluid is corrosive and may be toxic. If a battery leaks, keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces. Immediately flush the affected areas with water, or seek medical help.
• DO NOT ignore those warning signs on components or products made by manufacturers.
• DO NOT dismantle, cut, crush, puncture, or otherwise damage the unit in any way.
• DO NOT insert foreign objects into the fan, vents, ports, or other openings.
• NEVER use a damaged battery or component. Improper use or misuse of damaged batteries may cause damage to your device or injury to yourself as a result of battery fluid leakage, fire, overheating, or explosion.
• Use approved batteries and accessories ONLY. Improper use or use of unapproved or incompatible batteries or components may result in a risk of fire, explosion, or another hazard, and may invalidate any approval or warranty.
• Turn off the unit IMMEDIATELY in case of malfunction.
• Use a dry powder fire extinguisher in case of fire.
• DO NOT attempt to modify, or replace the internal battery or any other component of the unit by anyone other than qualified personnel. If necessary, take it to an authorized service center as incorrect reassembly may result in a risk of fire or electric shock.

Maintenance Instructions

• When not using the unit for extended periods of time, power off the unit and disconnect the AC adapter from the outlet.
• Charge the unit to 80% SOC every 3-6 months for long-term storage.
• Clean the unit with a dry cloth gently and carefully.

Handling and Storage Instructions

• Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).
• DO NOT stack anything on top of the unit either in storage or in use.
• Recommended storage temperature: 74-773° F/-70-45″C.

What’s In The Box

Standard Packaging

• The below accessories are not included in standard packaging and can be purchased separately at https://www.bluettipower.eu.
• AC   Adapter: 47in/720cm.
• Car Charging Cable: 28in/72cm. XT60 to Cigarette lighter port.
• Solar Charging Cable: 59in/750cm. XT60 to MC4.
• DC7909-XT60 Female Cable: 20in/50cm. DC7909 to XT60.
• Note: Package details are subject to change without prior notice.

Product Overview

Diagram

1. DC Input
2. Adapter Input
3. LCD Screen
4. Wireless Charging Pad
5. DC 72V Power Button
6. DC5527 Port
7. Cigarette Lighter Port
8. DC Power Button
9. USB-A Port
10. USB-C Port
11. AC Power Button
12. AC Output

Specifications

EBSS

General
Battery Capacity| 537Wh
Cell Type| LiFePO4
Dimensions (LWH)| 10.947.877.791N/278200198 MM
Weight| 16.SLB/7.SKG
Discharging Temperature| -4-104°F/-20-40°C
Charging Temperature| 32-l04°F/0-40°C
Storage temperature| -20-45°C(Optimal: 20-30°C )/-4-ll3°F(Optimal 68-86°F)
Working Humidity| 10-90%
AC Output
Power| 700W
Surge| 1400W
Voltage(EU/UK/AU)| 220-240VAC
DC Output

Cigarette Lighter Port *7

| Voltage| l2VDC
Current| l0A (Cigarette Lighter and DC552l l0A total)

DC5521 *2

| Voltage| l2VDC
Current| l0A total (Cigarette Lighter and DCSS2l 10A total)

USB-A *4

| Voltage| SVDC
Current| 3A
USB-C PD3.0 l| Power| lO0W Max.
Wireless Charging l| Power| 5/7S/l0/1SW
Adapter Input
Power| 200W Max.
Voltage| 2S-28VDC
Current| l0A Max.
PV Input
Power| 200W Max.
Open Circuit Voltage (OCV)| l2-28VDC
Current| BA Max.
Car Charging| 98W@12V; 196W@24V
Adapter+ PV Dual Charging| 400W Max. (200W for Both Adapter and PV)
Dual Adapter Charging| 400W Max. (Extra adapter needed)

Operation

LCD Screen

• a : ECO Mode
• b : Battery Capacity
• c : Input Power
• d : Low-battery Alert
• e: Temperature Anomaly Alert
• f : Output Power
• g : Overload Alert
• h : Short-circuit Alert

Powering On/Off

Powering on: Press the AC/DC/DC 12V Power Button to start up the corresponding output.

• The LCD screen is on for 30-60 seconds. Please enable at least one of these ports (AC/DC/DC 12V) if you want the display to stay on longer.
• Note: Please turn on the DC power to enable the wireless charging.
• Powering off: Press and hold power buttons to shut down the corresponding output.

Mode

• Setting Mode: When the AC output is off, press the AC and DC power buttons simultaneously, and the frequency indicator flashes.
• ECO Mode: Under ‘Setting Mode’, press the DC power button to turn it on/off.

Setting

• AC Frequency 2: Under ‘Setting Mode’, press the AC power button to switch.

Charging

AC Charging

• Simply plug the EB55 into a standard wall outlet and start charging.

1. When in this mode, the AC/DC output will automatically turn off after a 4-hour low (cslOW for AC, cslW for DC) or no load to save power.
2. AC Frequency.The number of alternating cycles per second in an AC sine wave. The utility frequency is usually 50/60Hz.

PVCharging

• Connect the solar panels (in series or parallel) to EB55 via the solar charging cable.
• Note: Please make sure your solar panels comply with:
• OCV3: 72-28V
• Input Current: BA Max.
• Input Power: 200W Max.

Car Charging

• Connect the EB55 directly to the vehicle plug-in cigarette lighter port via the car charging cable.
• 0CV: Open circuit voltage. The maximum voltage that the solar panel can produce with no load on it.

Generator Charging

• Connect the AC adapter input plug to the generator while the output plug goes to the DC charging port of EB55.

Dual Charging

• EB55 also supports dual charging. (e.g. Adapter+ PV Charging and Dual Adapter Charging).
• An extra adapter (200W AC Adapter+ DC7909-XT60 Female Cable) is needed for Dual Adapter Charging.

Discharging

• 537Wh x DoD x ri.;. (load power)= charging time (estimated)
• Note: DoD refers to the Depth of Discharge, ri is the local inverter efficiency. DoD=90%, ri=90%.
• Load power and charging time are measured in watts and Hour.

Appendix

FAQs (Frequently Asked Questions)

• Q: How do I know whether my devices will work well with this product?
• A: Please evaluate the total constant load of your appliances. If it doesn’t exceed the Max. the output power of EBSS, you can use this power station to charge.

Q: Can I use third-party solar panels to charge this product?

• A : Yes, you can. As long as the specs of solar panels you’re using fall in below range:
• OCV:72-28V
• Input Current: BA Max.
• Input Power: 200W Max.
• With the same power connector (MC4 or Anderson)

Q: How can I charge this EBSS by dual adapter charging?

• A: An extra adapter (200W AC Adapter+ DC7909-XT60 Female Cable) is needed to connect to the DC input port.

Q: Is there a button to turn on/off the wireless charging?

• A: Yes. Press the DC Power Button to enable the wireless charging.

Q: Can it charge and discharge at the same time?

• A: Yes. It supports pass-through charging. EBSS comes with the premium LiFePO4 battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.

Technical Support

• Should you require any further assistance, please do not hesitate to contact the BLU ETTI service team.
• BLUETTIPOWERINC
• Web:https://www.bluettipower.eu
• Mail:sale-eu@bluettipower.com
• Add: LindwurmstraBe 774, 80337 Munich, Germany.
• Company: P0WER0AKGmbH
• Address: Lindwurmstr. 774, 80337 MOnchen Germany Mail: logi@bluetti.de
• Company: P0WER0AK ENERGY UK CO,LTD Address: Unit 2 Northgate, Bolsover Busines Park, Bolsover, S44 68D
• Mail:poweroak.eu@bluetti.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>