amazon basics B09SQCGY5L Wireless Presenter Instruction Manual
- June 14, 2024
- amazon basics
Table of Contents
- amazon basics B09SQCGY5L Wireless Presenter
- Important Safeguards
- Symbols Explanation
- Product Description
- Before First Use
- Operation
- Cleaning and Maintenance
- Frequently Asked Questions
- Trademarks
- FCC Compliance Statement
- Canada IC Notice
- Disposal
- Battery Disposal
- Specifications
- Feedback and Help
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
amazon basics B09SQCGY5L Wireless Presenter
Important Safeguards
Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
WARNING Risk of injury! The safety features of this device may not protect the user if not used in accordance with this user manual.
- Do not leave the device unattended. Always prevent access to the device by unauthorised personnel, for example by children.
- Do not attempt repairs or any adjustments. There are no user serviceable parts.
- Do not open the device. The laser beam is dangerous to the eyes. Have the device repaired only by a professional.
- Do not use if the device appears damaged or if it is not working properly. If in doubt, replace the device.
- Do not use the device near medical equipment.
Laser beam warnings
The following laser hazard symbol and warning label are used to alert the
user to the risk associated with improper use of a laser pointer. Do not
remove explanatory and warning labels.
- The laser beam (also the one that is reflected from another surface) is dangerous for the eyes of people and animals.
- Improper use can lead to permanent damage of the eyesight! Do not disassemble the laser device!
- Do not stare into the laser beam or direct it towards other people. Eye protection is normally afforded by aversion responses including the blink reflex.
- According to IEC 60825-1:2014, laser pointer was classified as a class 2 laser device. That is, a laser that emits visible radiation in the wavelength range of 400 nm to 700 nm is safe for momentary exposure, but can be dangerous when intentional gazing into the beam.
- This device produces a visible red laser beam which is emitted from the front of the housing.
- Blinding by laser beam can indirectly lead to serious accidents, especially for people who are driving a vehicle or operating machinery.
- When operating the laser device, always make sure that the laser beam is directed so that no one is in the projection area and that unintentionally reflected beams (for example, from reflective objects) cannot be directed into areas where people are present.
- Laser beam can be dangerous, if the laser beam or its reflection enters unprotected eyes. Always familiarize yourself with statutory regulations and operating instructions before using laser device.
- If laser beam enters your eyes, close your eyes immediately and move your head away from the beam.
- If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety implications, such as working with machines, working from great heights or close to high voltage. Also, do not operate any vehicles until the irritation has completely subsided.
- Never aim a laser beam at the sun or at any aircraft, helicopter or drone. The laser beam can distract or flashblind pilots. The laser beam continues to travel even if the light is no longer visible.
CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Battery Warnings
NOTICE The batteries are not included.
- Always insert batteries correctly with regards to polarity (+ and –) marked on the battery and the product.
- Exhausted batteries should be immediately removed from product and properly disposed.
Intended Use
- This product is intended for navigation during presentations.
- This product is intended for private use only.
- This product is intended to be used in dry indoor areas only.
Symbols Explanation
This symbol stands for “Conformité Européenne”, which declares “Conformity with EU directives, regulations and appplicable standards”. With the CE- marking, the manufacturer confirms that this product complies with applicable European directives and regulation.
This symbol stands for “United Kingdom Conformity Assessed”. With the UKCA- marking, the manufacturer confirms that this product complies with applicable regulations and standards within Great Britain.
Product Description
- A Enter button
- B Tab button
- C Status indicator
- D laser button
- E previous button
- F next button
- G Battery cover
- H USB dongle
- I ON/OFF slider
Before First Use
DANGER Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are
a potential source of danger, e.g. suffocation.
- Remove all the packing materials.
- Remove and review all components before use.
- Check the product for transport damages.
Operation
Inserting the battery
NOTICE
- The product is out of battery if the status indicator (C) flashes quickly when pressed or it is unresponsive when a button is pressed.
- When battery is low, the operating range of the product decreases. It is recommended to replace the battery before the power fully runs out.
- Remove the battery cover (G).
- Insert 1x 1.5 V AAA battery (not included) into the battery compartment correctly with regard to polarity (+ and –) marked on the battery and the product.
- Install the battery cover (G).
Connecting to a computer
NOTICE The product supports Windows® 10/8/7/Vista/XP/2000 and Mac® 10.4 X or
later and Android™ 4.0 operating systems. For Mac® computers, “Keyboard Set
Assistant” may pop up, click “Continue” to allow the computer to finish setup.
- Take the USB dongle (H) out from the back of the product.
- Connect the USB dongle (H) to a USB-A port of a computer.
Switching on/off
- To switch on the product, set the ON/OFF slider (I) to ON.
- To switch off the product, set the ON/OFF slider (I) to OFF.
Presentation functions
NOTICE
- Keep the input language of the computer as English when using the product.
- For Keynote® software on Mac® OS, the product only supports changing slides (next/previous) and black screen functions.
- The product does not support opening hyperlink function for WPS office.
Action | Function |
---|---|
Short press | Return to previous slide |
Short press | Go to the next slide |
Long press | Enter/exit full screen mode |
Long press | Enter/exit black screen mode |
Hold | Activate laser |
Button | Action |
--- | --- |
Tab
| ****
Short press
| Move between selectable elements
Tab
| ****
Long press
| Switch between open windows
Enter
| Short press| Open selected hyperlink
Enter
| ****
Long press
| Close currently opened window
Cleaning and Maintenance
NOTICE
- Switch the product off before cleaning.
- During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.
Cleaning
- To clean the product, wipe with a soft, slightly damp cloth.
- Wipe the product dry after cleaning.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
Storage
- Place the USB dongle (H) back into the main unit.
- Store the product in its original packaging in a dry area. Keep away from children and pets.
Frequently Asked Questions
Problem | Solution |
---|---|
The product does not switch on | The product is low/out of battery Change to a |
new battery
Computer cannot detect the USB dongle| Current USB-A port might
be faulty Try another USB-A port
The product is not responding to presses| The product is out of range Get
closer to the USB dongle and try again
The product is low/out of battery
Change to a new battery
Trademarks
Windows® is a registered trademark of Microsoft Corporation.
- Mac® and Keynote® are registered trademarks of Apple Inc.
- Android™ is a registered trademark of Google LLC.
- WPS is a registered trademark of Beijing Kingsoft Office Software, INC.
FCC Compliance Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Canada IC Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with Canadian CAN ICES‑003(B) / NMB‑003(B) standard.
Simplified EU Declaration of Conformity
- Hereby, Amazon EU Sarl declares that the radio equipment type B09SQCGY5L is in compliance with Directive 2014/53/EU.
- The full text of the EU declaration of conformity is available at the following internet address: https://www.amazon.co.uk/dp/B09SQCGY5L
Simplified UK Declaration of Conformity
- Hereby, Amazon EU SARL, UK Branch declares that the radio equipment type B09SQCGY5L is in compliance with The Radio Equipment Regulations 2017.
- The full text of the UK declaration of conformity is available at the following internet address: https://www.amazon.co.uk/dp/B09SQCGY5L
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centres in order to conserve natural resources. Each country should have its collection centres for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.
Battery Disposal
Do not dispose of used batteries with your household waste. Take them to an appropriate disposal/collection site.
To learn more about recycling batteries, visit: call2recycle.org/what- can-i-recycle
Specifications
Voltage/ battery type|
1 x 1.5 V AAA
---|---
Control range| 164′ (50 m)
(no obstructions)
Operating
frequency
| 2.4 GHz
Laser range| 328.08’
(100 m)
Laser class| 2 (red color)
Laser
wavelength
| 630 – 670 nm
Maximum
output of radiation power
| <1 mW
Compatible operating systems
| Windows®
10/8/7/Vista/ XP/2000
Mac® 10.4 X or later Android™ 4.0
USB port
requirement
| USB 1.1, 2.0 and
3.0
Storage
temperature
| -4 °F to +122 °F
(-20 °C to +50 °C)
Operation
temperature
| +32 °F to +113 °F
(0 °C to +45 °C)
Working
humidity
| 45 % – 80 % RH
Net weight| approx. 0.84 oz
(24 g)
Dimensions (W x H x D)
| approx. 5.2 x 1.0
x 0.6″
(13.2 x 2.6 x 1.4 cm)
Importer Information
For EU | |
---|---|
Postal: | Amazon EU S.à r.l., 38 avenue John F. |
Kennedy, L-1855 Luxembourg
Business Reg:| 134248
Feedback and Help
We would love to hear your feedback. To ensure we are providing the best
customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader: US:
UK: amazon.co.uk/review/review‑your‑purchases#
If you need help with your Amazon Basics product, please use the website or number below.
US:
amazon.com/gp/help/customer/contact‑us
UK:
amazon.co.uk/gp/help/customer/contact‑us
+1 877‑485‑0385 (US Phone Number)
References
- Low Prices in Electronics, Books, Sports Equipment & more
- . Spend less. Smile more.
- amazon.com/
- Amazon Basics
- Amazon.de: Günstige Preise für Elektronik & Foto, Filme, Musik, Bücher, Games, Spielzeug & mehr
- Amazon.de : GP TONER
- Amazon.fr: GP
- Amazon.it: GP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>