Diivoo GL-05B Bluetooth Smart Grow Light for Indoor Plant User Manual
- June 14, 2024
- Diivoo
Table of Contents
Diivoo GL-05B Bluetooth Smart Grow Light for Indoor Plant
Product Structure
Product Installation
- Removing the body and base.
- Unfold the “V” base and tighten the body to the base.
- Place the potted plant and adjust the height of the telescopic pole. The light head is just 10-30cm away from the top of the plant.
Product Spec
Connection Instruction
Step 1: Initial Smart Life App Setup
Download the Smart Life App
Scan the QR code and download the free Android or IOS app, then install the
APP. If you have already installed the Smart Life APP.
Step 2: Plug-in power source
Step 3: Enter Configuration Mode Turn on Bluetooth on your phone. Click
one button to turn on, and long press the switch for 3~5s, until the light
flashes three times, indicating that the plant light is ready for pairing.
(Note: Make sure to turn on Bluetooth and location on your phone during
pairing.)
Tips
Scenario 1: device not paired Short-press the switch, and blue-tooth will
turn on automatically- Cally. Light enters pairing mode when lights start
flashing.
Scenario 2: Device connected
Short-press switch, light turns on; Long-press switch 3-5 sec, light enters
pairing mode and starts flashing
Step 4: Add a Device
Click “Add device” or top right “+”, select another path “Lighting” > “Light
Source Light. Waiting for connecting to be 100% completed.
App Interface Intro
APP main interface
Introduction Add new plants User guidance Skip
- Plant filter.
- Add custom plant
- Click the “Manage” button in the top right corner, and up to 30 custom plants can be added.
- Click “manage” and jump to the “new plant configure” interface to add new plants.
- You can type in the plant name, choose an avatar and adjust parameters.
After selecting the plant to save, enter the lighting parameter settings: 0 Plant parameter prompts (light intensity, light time, light preference, recommended duration, recommended intensity)
- Brightness adjustment
- 100% Timing adjustment 24h.
- Improper adjustment| can be reset back to the initial state with one key.
- One key to open is the sunlight/growth mode switch.
Mode Display
Sunlight mode
RA: 90, Color temperature: 6000K, similar to sunlight, can be used as a
reading lamp.
Growing mode
Full spectrum design for foliage plants. The optimized light quality ratio of
red, blue and green: 350nm-780m. Allowing plants to grow without sunlight, as
well as having a positive effect on colouring and fluorescence. Accelerating
nutrition synthesis for plants to grow healthily and maintain their
ornamentally. Grow light also accelerates photosynthesis.
Tips
How to switch modes: 1) short-press “mode switch” button to switch. 2) Switch
via app.
Question And Answer Session
-
Will the grow lights automatically be turned on every day?
When the device is powered on normally, the grow light will be turned on as scheduled every day. -
What is the difference between sunlight mode and growth mode, and what scenarios are suitable for it?
The differences between the two are as follows: The growth mode can accelerate the absorption of plant nutrients, enhance photosynthesis, promote strong growth and maintain the ornamental value of plant; Sunlight mode: It is suitable for the human eye, to promote the normal growth and colouring of plants; it also has the function of a desk lamp; Both grow mode and sunlight mode are suitable for indoor, bedroom, kitchen, garage, office and other usage scenarios -
Is this indoor plant grow light suitable for hanging pots?
The base can be removed, allowing the lamp head to hang on the plant hanger. -
What is the most suitable size of potted plants for growing light?
It is suitable for potted plants within the range of 2.5 to 7 inches. -
Will it affect the plant if the lamp base is too close to the leaves? and what is the recommended distance?
The heat will be high if the lamp base is too close to the leaves, which may result in the risk of “burning” the leaves of the plant, It is recommended to be 15-30cm away from the surface of the leaf. -
Is it an effective full-spectrum?
Yes, and the colour temperature of daylight mode is 5000K, and the colour temperature of the growth mode is 10000K. -
What is the coverage range of Bluetooth?
Within 20-30m for open space, within 20m for single-storey residences, and 5m for upper and lower retest timber. (except for cement decoration)
After-Sales Service
- Grow lights are guaranteed for 1 year from the date of purchase. If you have any questions, please feel free to contact us at support@diivoosmart.com. We will follow up and reply within 24 hours.
- The following conditions are not included: Problems occur due to its use for other purposes, or improper use or use of components not supplied by Diivoo.
- Damages caused by improper use, for example, incorrect battery installation, artificial damage, etc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>