meross MSL120HKUS Smart Light Bulb User Manual
- June 14, 2024
- Meross
Table of Contents
meross MSL120HKUS Smart Light Bulb
Safety Information
RISK OF ELECTRIC SHOCK OR BURNS.
- Make sure the power is OFF on the bulb you are replacing.
- Wait untilthe bulb cools down and then replace it.
- Do not install the bulb with wet hands or when standing on wet or damp surfaces.
- Suitable for use in operating environment between -20°C and 40°C (- 4°F and 104°F).
- Not for emergency lighting. Radio-frequency / Max transmission power: 2400-2483.5MHz, 20dBm.
Installation Guide
-
Download the Meross app.http://bucket-meross-static.meross.com/production/qrcode/meross.html’
-
Swap the current bulb with your Meross smart bulb. Metal lamp shades may decrease your Meross smart bulb’s performance.
-
Set up the device.
(1) Connect your smartphone or tablet to a 2.4 GHz Wi-Fi
(2) Make sure your smart bulb is covered by strong Wi-Fi signal.
(3) The smart bulb supports 10813/ iPadOS 13 and later. In order to have better user experience, it is recommended that you upgrade your iOS or iPadOs to the latest version before pairing with the bulb. -
Launch the Meross app, and log in to your account, or if you are a new user, tap Sign up to create a new account.
-
Tap the “+” icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.
Note:
- As long as you finish configuration, youll also be able to manage thedevice in Apple Home app.
- Should you have any question, please visit hitps://svrvmeross.com/Support/,
LED Rules
Flashing 3 times:
Initialization process finished, entering into configuration mode.
Successfully configured. (For MSLIOO &MSLTIO only)
Smoothly flashing from Red to Green to Blue to Warm to Cold white:
Successfully configured. (For MSL120 only)
FAQ
At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive lst of questions that users are mostly concerned about.
1. How do I reset my Meross smart bulb?
Turn the light switch controlling the bulb to OFF first, then flip the light switch on and off 5 times. Note that factory reset the smart bulb will erase all of your custom settings, and you'll have to set it up
again Can dim my Meross smart bulb with standard in-wall dimmer?
No. Meross smart bulb does not support standard in-wall dimmer. You can dim it via Meross app.
3. My Home app can't add the device by scanning the QR code.
You can tap “Don't Have a Code or Can't Scan” and input the code manually.
Warranty
Meross products are covered by a 12-month limited warranty from the date of purchase. Please visit https://www.meross.com/support/warranty for detailed warranty policy and product registration.
Disclaimer
- The function of this smart device is tested under a typical circumstance described in our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
- By using third-party services including but not limitted to Amazon Alexa, Google Assistant, Apple HomeKit and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what s expressly covered inits Privacy Policy.
- Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom Customers acknowledge understanding of these articles clearly by reading this manual.
FCC Compliance Information Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
oceur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that
complywith Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
This transmitter must not be colocated or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body.
SIMPLE DEVICE SIMPLIFY YOUR LIFE
Email: support@meross.com
Website: www.meross.com
Manufacturer: Hengdian Group Tospo Lighting Co. Ltd.
Address: Hengdian Electronics Industrial Zone, Dongyang, Zhejiang,
322118 China.
Made In
Chaina
Indoor Use Only
Documents / Resources
|
meross MSL120HKUS Smart Light
Bulb
[pdf] User Manual
MSL120HKUS, MSL120HKUS Smart Light Bulb, Smart Light Bulb, Light Bulb, Bulb
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>