UN1QUE Aiolos PT100 Smart Tire Inflator User Manual

June 14, 2024
UN1QUE

SMART TIRE INFLATOR
Aiolos PT100
User Manual & Warranty

Please read carefully before using the product

Product Overview

  1. LED lighting
  2. Type-C charging socket
  3. USB charging port
  4. Inflatable tube interface
  5. Display
  6. Battery power
  7. Button area

Specification

Model: Azolos PTI00
Battery Capacity : 6000 mAh
Input: DC 5V/2A
Output: DC 5V/1A
Max Output Pressure : 150 PSI
Working Temperature : -10~45C
Charge Time: 5 Hours

In The Box

Machine 1
Inflatable Tube
1
Adapter 4
Power Cord
1
Storage Bag1
User Manual
1

Adapter list

| Nozzle for bicycle| | Nozzle for rubber boat
---|---|---|---
| Ball needle| | Nozzle for swim ring

Button Definition

UN1QUE Aiolos PT100 Smart Tire Inflator - Button

Power Button
Press and hold the button to turn it on/off, and a short press to start/stop inflation after turning it on. After 1 minute, it will shut down if not used,
Mode Switch
After powering on, you can switch modes by pressing the button, and the default air pressure value will change as well
unit itch
Four aid pressure units are provided in this product: PS, BAR, KAP, and Kg/cm?. You can switch the unit used by pressing the ** button.
setting Value Adjustment
This product has default pressure settings, but f they do not meet your needs, you can manually adjust the pressure by using the plus **or minus ****keys to increase or decrease the numbers (short presses increase or decrease the value by 00), while long presses are for quick adjustment, also in increments of 0.01). After adjusting to the desired value, wait for 3 seconds for the automatic setting to take effect. The air pump pressure setting will now have changed to your desired number, and you can start the air pump by pressing the appropriate key.

Default Tire Pressure

| | |
---|---|---|---
Car| Motorcycle| Bike| Basketball
36PSI| 40Ps!| 50PSI| 8pPsI

How To Use

Inflate the Device

  1. Press and hold the power button to turn on the device.
  2. After the pressure value is reset to zero, confirm that the set value is within the reasonable range for inflating tires and other objects.
  3. Connect the included nozzle tube to the air outlet of the inflator and tighten it
  4. Attach the nozzle to the tire valve core/ ball needle and secure it with the pressure handle.
  5. Confirm that the inflation mode is correct, then press the appropriate button to start inflating. The inflator will stop automatically when the preset value is reached.

LED Lighting
Press and hold the “U” button to turn on the LED light, and press and hold the same button again to turn off the LED light.

Recommended Inflatable Pressure Gauge

Product Category Product Type Recommended pressure range
Bicycle 12,14,16 inch bicycle tires

20,22,24 inch bicycle tires
26,275,29 inch bicycle tires
700C road bike clincher tire
700C road bike tube tire| 30-50 PSI
40-50 PSI
45-65 PSI
100-130 PSI
120-145 PSI
Motorcycle| Motorcycle, Electric motorcycle tires| 1.8-3.0 bar
Car| Small car tires| 2.2-2.8 bar
Ball| Basketball football Volleyball| 7-9 PSI
8-16 PSI
4-6 PSI

Reminder: The value of the recommended inflation pressure range is for reference only. Please refer to the requirements of the instruction manual for the inflated product.

Troubleshooting

Fault Exclusive Method
Slow inflation speed Check whether the product is fully charged.

Check whether the air pipe is airtight.
Check whether the air pipe and tire are connected well.
Check whether the inflated object leaks.
Can not be inflated even power on| Check whether the power is sufficient.
Check whether the current tire pressure is higher than the preset value.
Normal inflation while the pressure is zero| The inflation pressure value of the balloon, rubber balls and other low-pressure inflatable products are not within the considered range.
There is air leakage when connecting the air pipe| Tightening the air pipe.

Reminder: Contact customer service for more solutions
Attention

  1. This product is forbidden to be used alone by children under 5 years old. Do not use this product as a toy.
  2. Never insert the trachea into the mouth, ears, nose, and eyes of humans or animals to inflate.
  3. It is forbidden to use this product in places near flammable and explosive liquids and gases (such as gas stations).
  4. The physical heating phenomenon of high-pressure operation will occur when inflating. Please be careful to burn your hands when removing the air pipe.
  5. It will automatically stop after 10 minutes of continuous use to prevent the machine from overheating. It is recommended to turn it on again at an interval of 2 to 5 minutes after stopping.
  6. The inflation pressure of balloons, toy balls, swimming rings, and other products is below the range of the inflatable pump, and the inflatable pump cannot be automatically stopped by the preset tire pressure. It should be used with caution.
  7. It’s recommended to charge it at least once every 3 months.

Warranty & Support

http://www.1-unique.com
Register now for your benefit
WhatsApp: +91 9082036718
Mailbox: [email protected]
Website: www.unique.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals