cithot RS8336 Electric Shaver User Manual
- June 14, 2024
- cithot
Table of Contents
cithot RS8336 Electric Shaver
Components
- Protective cap
- Individually floating heads
- Shaving unit
- Shaving unit release button
- ON/OFF
- LCD display
- Sideburn trimmer
- Pop-up trimmer switch
- Adapter
- Cleaning brush
How to use
Charging
- When turning on the product, the LCD display will light up and show the battery remaining percentage.
- If the battery does not have sufficient power, please connect the product to the charging cable and plug the adapter into a 100V-240V socket.
- Please note that when connected to the power supply, the LCD display will still show the battery remaining percentage, which will increase according to the charging time.
- Fully charged in 1.5-2 hours, the display will show “100%” when fully charged.
Shaving
- Attention: Do not press too hard against the skin.
- Please note that after 8 seconds of use, the LCD display will turn off automatically, while the product will continue running
- Press the ON button to turn on the shaver. The LCD display will light up as well.
- Move the shaving heads over the skin using gentle circular movements to capture all the hairs.
- Go against the direction of the facial hair growing, or shave in the same direction if your skin is sensitive.
- For trimming the sideburns and moustache, push down the pop-up trimmer switch and move it downwards applying gentle pressure..
Travel lock function
- Press the ON/OFF button for 3 seconds to lock it.
- When locked, the LCD display will show a small lock icon and you will hear “di di” sound.
- Press the ON/OFF button for 3 seconds to unlock it.
- When unlocked, the LCD display will show a small lock icon and you will hear “di di” sound.
LCD Display
Attention: When the battery does not have sufficient power or it is influenced by the environmental factors or temperature, the battery remaining percentage may not be precise.
- When turned on, the LCD display shows the battery remaining percentage.
- If the razor continues to run for more than one and a half minutes, when you turn it off, a tap icon will appear, prompting you that the razor needs cleaning.
Cleaning and Maintenance
Attention: When disassembling and installing the cutter head during the
cleaning process, the parts A, Band C need to be one-to-one correspondence.
And please remember not to confuse them. Otherwise, the shaving effect will
become worse. If you continue to use it, it may cause damage to the cutter
head.
Attention : Make sure the product is completely switched off before cleaning.
- For convenience and better shaving results, it is recommended to clean the product regularly after use. Cleaning the product regularly will keep it in good condition, avoiding bad odors and bacteria, and maintaining good shaving results.
- Press the power button to switched razor off and a tap icon appears.
- Press the release button to open the shaving unit.
- Please remember the ABC three-group accessories’ position before disassembling the cutter head. During the disassembly and installation process, the ABC three-group accessories need one-to-one combination. If it is confused, it may affect the shaving effect. (So we suggest you to remove and clean the blade one set at a time)
- Then turn the lock counterclockwise: G) pulling it up @to unlock and remove the retaining frame.
- Then remove and clean one set of blade and blade mesh at a time.
- Separate the blade and the blade mesh and clean both parts with brush or under warm water.
Shaving Head Unit Assembly Method
- The hole of the blade is aligned with the metal cylinder of the blade mesh (each blade and mesh is a fixed set and cannot be mixed to use).
- Be sure to aim the concave part of the blade to the protruding part of the machine.
- During the installation, please ensure that the ABC three-group accessories are one-to-one combination. (If confused, it may affect the shaving effect) And then aim the retaining clip to blade and intermediate cylindrical part.
- Clockwise rotation to fix the retaining clip.
- Installation is complete.
Caution
- Please keep the product and the adapter dry (see fig.1).
- Before charging, please make sure to plug the adapter into a 100V-240V socket only. Otherwise it may cause electric shock or fire (see fig. 4).
- Never use the product or its adapter when damaged.
- Please hold the plug with dry hands when pulling plug off, do not yank off by pulling the charging cable (see fig. 3).
- Please use the charging cable included in the package only. If the charging cable is damaged, please contact the Customer Support by email: support-en@cithot.com.
- Never use char diluent, gasoline, alcohol or any other chemicals to clean the product.
- Please use, charge and store the product in a temperature between S’C to 35’C.
- While traveling, make sure the protective cap is secured on the shaving unit and the ON/OFF button is locked.
- This product is not suitable for people with physical, sensory or mental defects or anyone who lacks common sense (including children). Keep out of the reach of children (see fig. 2}.
- It is normal that the shaver might be hot when using or charging.
Technical Specification
- Product name: CITHOT electric shaver
- Model No: RS8336
- Voltage: 100-240V~ 50Hz/60Hz
- Charging time: 1.5~2 hours
- Battery Run-time: approx. 90~ 120min
This product is intended for domestic use only.
After-sales Service
- English : support-en@cithot.com
- German: support-de@cithot.com
- Italian : support-it@cithot.com
- Spanish: support-es@cithot.com
- French: support-fr@cithot.com
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>