Keenray EL20 Cold Press Juicer Instruction Manual

Keenray EL20 Cold Press Juicer

Important Information

You have made an excellent choice with the purchase of this quality product! Please read all the instructions carefully before using and please retain this instruction manual for further reference.

SPECIFICATIONS

IMPORTANT:

1. The unit is designed for household use only.
2. This is not a toy. Please do not let children play with it or use it.
3. Read all instructions before use carefully.
4. Keep this instruction forever.

IMPORTANT SAFEGUARDS

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

Keep the appliance and its cord out of reach of children less than 8 years. This appliance is suitable to be used in a household environment and in similar surroundings such as:

• Kitchen for personnel of shops, offices or other similar professional surroundings
• Farms
• Hotel or motel rooms and other surroundings with a residential character
• Guest rooms or similar
• Travel

Attention: This appliance cannot be used with an external timer or a separate remote control.

1. Make sure the electricity supply is suitable for this unit.
2. This unit is intended for household use only. Do not use the unit outdoors or for another purpose than intended.
3. Use the unit only as described in this manual.
4. To prevent electrical shock, do not immerse the unit, cord set and plug into water.
5. This is not a toy and is not to be used by children. Close supervision is required when the unit is used near children.
6. Ensure to unplug the unit when not in use, assemble or disassemble it, and before cleaning.
7. The continuous operation time of this product should be within 20 minutes.
8. No-load or overloaded operation of the machine is prohibited.
9. Do not touch or move any moving parts during operation of the machine.
10. Do not use finger, spoon or chopsticks to push fruits or vegetables into the chute of the machine. Only pusher is allowed.
11. Do not open the unit when it is operating.
12. Do not place the unit near any explosives, heated oven or hot surfaces.
13. Operate the unit only on a flat surface.
14. Do not let the cords hang over the edge of a table or the like.
15. Please hold the plug to disconnect it from the power socket.
16. If the parts of the product structure are found to be damaged (especially the safety device and power cord), please stop using and send it to the service center to be repaired by a qualified technician.
17. If the screw press should get obstructed, please hold the “R” button for about 2 to 3 seconds to let it turn in the opposite direction. After this, try to let the screw turn in the right direction again.
18. Don’t use water that is warmer than 40℃/ 140°F to rinse the appliance parts.
19. Never fill the appliance with unknown foods.
20. Make sure that the base of the unit does not get wet.
21. This appliance is suitable to be used in a household environment and in similar surroundings.

PARTS DIAGRAM

USING FOR FIRST TIME

BEFORE FIRST USE

1. Remove all parts from the packaging.
2. Wash all removable and washable parts, such as the Feeding chute, Pusher, Auger, Cover, Pulp cup and Juice cup in warm soapy water, rinse and dry them thoroughly.

Caution: Never submerge the motor block in water!

Tip: The filter can be cleaned with the cleaning brush

Positioning of the regular sieve:

Make sure the plug is not in the outlet and that the on/off switch is turned off prior to assembling the machine.

INSTRUCTIONS FOR JUICES:

The On/Off switch has 3 positions:
Make sure the plug is not in the outlet and that the on/off switch is turned off prior to assembling the machine.

On: ━
Off: O
Reverse direction: R|
---|---

Clean the fruit and vegetables and cut them into pieces.

Usage Tips:

1. Remove hard pits or seeds prior to pressing to prevent possible damage to the squeezing auger.
2. If mixed juices are to be made, please begin with harder fruit, and then squeeze the soft fruit.
3. Please let the juicer continue to run for 30 seconds after adding the last ingredient.

Attention:

Please do not use ice or particularly hard ingredients, it may cause damage or breakage to the body of the machine.

ASSEMBLING METHOD

Please make sure the unit is not plugged and the switch is turned to “O” setting prior to assembling the machine.

1. Position the feeding chute on the Motor Base:
   The arrow “▲” of the Feeding Chute aligns with of the Motor Base; then twist counter clockwise until the arrow ▲ of the feeding chute aligns with the lock of the Motor Base.
   

2. Install the Auger and Filter into the Feeding Chute until you can’t push.
   

3. Position the Cover into the Feeding Chute: The arrow “▲” of the Cover aligns with the lock of the Feeding Chute; then twist counterclockwise until the arrow ▲ of the Cover aligns with the lock of the Feeding Chute.
   

4. Position the Juice Cup under the spout of the juice and a Pulp Cup under the spout of the pulp.
   

DISASSEMBLING METHOD

NOTE:

If the juicer gets overheated, it will turn off automatically to protect the machine. In this case, please turn off the juicer. Wait 10 minutes to let the juicer cool down and then turn it on again.

Then, please follow the steps below:

To disassemble the unit after using and before cleaning. Please make sure to disconnect the juicer from the power source.

1. Make sure the power cord is unplugged and remove the Juice Cup and Pulp Cup.
   

2. Remove the Cover:
   Twist the Cover clockwise, until the ▲ on the Cover aligns with the lock of the Feeding Chute, then pull out the Cover.
   

3. Remove the Filter and Auger in turn, if it is too hard to pull, swings lightly, then pull out.
   

4. Remove the Feeding Chute : Press and hold the button first, twist the Feeding Chute with clockwise, until the ▲ on the feeding chute aligns with the lock of the Motor Base, then pull out the Feeding Chute.

Note: This machine is not suitable for ice or particularly hard or starchy ingredients such as sugar cane, avocado, bananas, figs, mangoes and papayas, dragon fruit, strawberries, and seedless grapes. They can clog the stainless steel screen.

CLEANING & MAINTENANCE

Important:

Please wash the juicing parts every time immediately after use, otherwise the pulp might stick tightly in Juicing Bowl & Squeezing Auger which will then affect the disassembly, cleaning and juicing performance.

1. Switch off and unplug the juicer.

2. Wash the disassembled parts with water. If the meshes are clogged With pulp, please use the provided cleaning brush to remove the dregs.
   Attention:

   • Do not use metal sponges, which could damage the machine.
   • Be careful when you clean the sieve. The sieve is sharp.

3. Do not put the power base into water for cleaning. Wipe it with damp cloth only.

4. After cleaning, please dry the parts thoroughly and store them in a dry, cool place.

The Following Parts Can Be Directly Rinsed With A Tap:

STORAGE

1. Follow cleaning instructions to maintain well the unit before storage.
2. Tidy up the power cord set.
3. Keep the unit away from children’s easy access.
4. Store the unit and the accessories in a dry, cool place.
   NOTE : Please make sure the unit and parts are dry before storing it.

TROUBLE SHOOTING

Switch to “R” position instantly to make the ingredients return upwards. If the machine still stops running, please clean the machine before use.
Hard fruits or vegetables have not been cut into small pieces.| Hard fruits and vegetables (such as carrots) shall be cut into thin strips or small cubes before putting into the chute.
The juice yield is low or juice flows out of the main housing.| The bowl and the silicone valve are not installed properly.| Please re-install the bowl silicone valve by referring to the installation method.
Abnormal noise.| Parts cause extrusion sound during squeezing.| The sound is caused by extrusion of fruits and vegetables, which is a normal phenomenon.
The chute & strainer assembly cannot be opened.| There are too many pulps inside the bowl.| Press switch to “R” setting to eject the pulps backward.
There are hard foods stuck inside.| Press switch to “R” to eject the object backward.
The pulp mess is stuck.| Pour water into the chute to soften the stuck pulp mess overnight.
The juicing cup is deformed or shaken.| The juicing cup is deformed or shaken during the juicing process.| It is normal that the juicer cup is slightly shaken or deformed during the working process of the appliance, and it is not a malfunction. Please don’t worry.

USEFUL TIPS

broken easily.
2| Not for the dry foods or others| The dry foods are too hard, not cut down by the squeezing screw, it is easy to make the squeezing parts broken；
3| The ingredient with long fiber needs to be cut down to 5-10CM| If the fiber is too long, it is too easy to wind, hard to spout, easy to make the squeezing parts broken；
4| The peel and pits/seeds must be removed from oranges, lemons, grapefruit and melons before use| The hard pit or seeds may make the squeezing parts broken, the peel may block the spout of pulp;
5| Not use others as a pusher| It may occur mechanical damage；
6| Not for too long working, the time better ≤15minutes| Working too long time may make the motor overheating and broken easily
7| Don’t put the pulp into the machine again| The pulp may block the spout of the pulp；
8| Don’t use the fruits that process with wine, honey or sugar| It may make the cover open hardly；
9| Don’t put the spoon, chopsticks into the opening of the cover, the spout of the juice and pulp.| It may occur mechanical damage；
10| It is better to drink juice immediately once finished the squeeze| The juice will be oxidized after the squeeze, if you can’t drink off, please store with sealer；
11| It is normal when there is the grating in squeeze|

Warranty

This appliance has a year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.

If your device breaks down within the 1-year warranty period, you can return the device together with your receipt to the shop where you purchased it

References

• Keenray | Keen innovations ray your life

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>