Shenzhi Tech MIC 2 Wireless Lavalier Microphone 3 in 1 Instructions
- June 14, 2024
- Shenzhi Tech
Table of Contents
Shenzhi Tech MIC 2 Wireless Lavalier Microphone 3 in 1
Introduction
Thanks for choosing our product
This product is a smart wireless microphone that provides professional-grade recording output Plug and play, no app required, Multiple uses: It can be used in on line live broadcast, video Vlog shooting, program interview, recording, video teaching and other occasions,
The wireless Microphone consists of two parts, one is Microphone transmitter,
the other one is receiver. (See as below picture)
ID Diagram
- Windproof net
- Microphone indicator
- Microphone charging port
- Microphone clip
- Switch key
- 9harging port and Charging port
- Key
- Receiver indicator
- TRRS
- Type-C interface
- iPhone interface
- Headphone jack
How to use
Short press the power button on the sending end for 1 second to turn on the
device, and the indicator light will flash red and green, Press the power
button for1 second on the receiving end, and the receiver will only flash
green and enter the automatic pairing state with the transmitter, After
successful pairing, the blue lights of the transmitter and receiver will
remain on, Al this time, the wireless microphone can be connected to the
device for recording and use normally,
This product is a multifunctional wireless microphone that can record multiple
devices on one device Sound demand, suitable for Android phones, Apple phones,
computers, tablets, Camera, 3.5mm old Android phone light device for
recording, and speaker expansion Note: Please adjust the appropriate volume
and Distance to avoid severe howling
About UI
Transmitter TX
| Function/Status | Operate | Lamp effect |
|---|---|---|
| Power on | Short press the power button for 1 second | Alternating flashing of |
traffic lights
Shutdown| Press and hold the button for 3 seconds| All lights off
Search pairing| | Alternating flashing of traffic lights
Paired successfully| Automatic connection and pairing upon startup| Green
light always on
LOW BATTERY| On state| Red light flashes twice every 10S
Charge| Charging with TC cable| Red light always on, full red light off
Mute| Press the button briefly| Green light flashing
Reverberation function| Short press the button twice| Flashing red light once
to turn green light for reverberation
Monitor Function| Plug in the TC analog headphone cable|
Connectionless| After 3 minutes, automatically turn off| All lights off
Receiver RX
| Function/Status | Operate | Lamp effect |
|---|---|---|
| Power on | Short press the power button for 1 second | Alternating flashing of |
traffic lights
Shutdown| Press and hold the button for 3 seconds| All lights off
Search pairing| | Alternating flashing of traffic lights
Paired successfully| Automatic connection and pairing upon startup| Green
light always on
LOW BATTERY| On state| Red light flashes twice every 10S
Charge| Charging with TC cable| Red light always on, full red light off
Sound card/ camera mode| Press the button briefly| Blue light, green light,
two lights always on (cyan)
Amplifier mode speaker| Press the button briefly| Green light always on
Phone mode| Press the button briefly| Blue light always on
Packing List
(1) Microphone Transmitter(TX)
(2) Receiver (RX)
(3) Type-C charging cable
(4) User manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>