KYXAIN MA5 Wireless Microphone System User Manual

KYXAIN MA5 Wireless Microphone System

About This Product

KYXAIN MAS System features a highly integrated chip design and ID code pairing authentication. It is designed for dynamic or 48V condenser microphones, changing the microphone into a wireless microphone, easy to install, no cables required, and suitable for a variety of venues.

Features

• Frequency Range: 500 – 980MHz
• Channel Spacing: 0.5 – 2.5 MHz
• Channel: 16 Frequency Points
• Modulation: DQPSK
• Frequency Stability: ±3PPM
• Frequency Response: 40Hz – 20KHz
• Transmission Range: 160 – 240 ft
• Battery: 3.7V, 1 000mAh lithium battery
• Battery Life: 6-8 hours
• Signal-to-Noise Ratio: 100 dB
• Distortion: < 0.5%

Ready to Use

1. Press and hold the power button for 1 second to turn on the power, and press and hold the power button for 1 second to turn off the power.
2. Double-click the power button to enter the frequency modulation, continue to double-click to adjust to the next frequency point, and automatically save after 3 seconds of inactivity.
3. The default voltage setting is SV.

Transmitter Panel

1. XLR Female Port
2. Battery Level Display
3. Signal Level
4. Frequency
5. Audio Gain Switcher
6. Power ON/OFF
7. 48/SV Phantom Power Switcher
8. Type C USB Charging Port
   

Receiver Panel

1. XLR Male Port
2. Battery Level Display
3. Type C USB Charging Port
4. Power ON/OFF
   

Suitable Scenario

1. Video Recording
   

2. General Purpose
   

Battery Charging

You can charge the transmitter and receiver at the same time using a dual port Type C splitter charging cable

1. When the three battery indicator lights are on, it means the battery is fully charged
2. When the battery indicator light is flashing, it means the battery voltage is too low, the battery power is only 10% and needs to be charged.

Caution

1. Do not disassemble or repair this product by yourself.
2. Do not use or store this product in a hot, humid or dusty place. Avoid severe vibration or shock.
3. Do not drop the product or it may malfunction.
4. Do not use alcohol or other cleaning agents to clean this product.
5. This product will only work properly when the transmitter and receiver are paired.
6. Make sure that the transmitter and receiver are kept away from the wireless router or other wireless devices when in use.
7. Obstacles between the transmitter and receiver may affect the transmission distance.
8. Up to 8 sets of transmitters and receivers can be used at the same time in the same locationwithout interference from other signals.
9. Turn off the transmitter and receiver when not in use.
10. Due to the nature of lithium batteries, there will be a slight self-discharge, so please recharge the batteries within 2 months to avoid low battery protection.
11. The capacity of lithium batteries will gradually decrease after repeated charging and discharging, so the service life of this product will be affected over time within an acceptable range.

One more Thing

This machine has been paired with the authentication code before leaving the factory. If you can’t pair or work properly by any means, please feel free to contact us by e-mail to solve all after-sale problems.

Customer Support

www.kyxain.com
Contact Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>