Dyson SV12 JN.00000 Airstrait Straightener User Manual

Dyson SV12 JN.00000 Airstrait Straightener

Product Information

• Specifications:
  • Model: Dyson Airstrait
  • Wet to dry straightening, with air
  • No hot plates, no heat damage
  • High-velocity air technology
  • Five precise temperature settings
  • Two-speed settings for airflow
  • Optional Boost mode
  • Cool mode for setting style

Product Usage Instructions

• Getting Started:
  • To unlock the machine’s arms, slide the lock button down. The LCD screen displays airflow and temperature settings. You can control the temperature, airflow, and mode selection using the buttons on the straightener.
• Using Your Straightener:
  • Your straightener is designed for towel-dried hair. Detangle your hair with a brush or comb before use.
  • Always ensure the fan motor is on when using the straightener.
  • Straightening from wet: Dry your roots with the arms closed. Set the straightener to Wet mode and choose the appropriate temperature for your hair type. Direct airflow towards your roots and pass sections of hair through the arms until dry.
• Cleaning Your Machine:
  • Clean the filter regularly to maintain optimal performance.
  • Clean the tension bars and diffusers to ensure smooth operation.
  • Deep clean the filter periodically for thorough maintenance.
• Alerts:
  • Pay attention to any alerts from the machine for timely maintenance or issues that may arise.

FAQs

• Q: Can I use the straightener on dripping wet hair?
  • A: No, the straightener is designed for towel-dried hair only. Do not use it on dripping wet hair.
• Q: How often should I clean the filter?
  • A: It is recommended to clean the filter regularly, depending on usage, to maintain optimal performance.

In the box

• Dyson Airstrait™straightener
  • Wet to dry straightening, with air. No hot plates. No heat damage. 1 Uses high-velocity air, not hot plates. Straightens from wet to dry. Engineered to create a natural straight finish.
• Velvet heat mat / Non-slip heat mat
  • For safe placement during and after styling.

Getting started

Using your straightener

• Your straightener is designed to be used with towel-dried hair, not dripping wet hair.
• Once towel-dried, detangle your hair with a brush or comb.
• Your straightener should never be used without the fan motor on.

Straightening from wet

• Before starting to straighten your hair, dry your roots with the arms of your straightener closed.
• You can use your straightener with the arms locked or just hold them closed.
• For the optimum experience, use maximum airflow and a higher temperature, and direct the airflow towards your roots.
• Unlock the arms and use the Mode select button to set your straightener to Wet mode.
• Your straightener will give you a choice of temperatures that you can change according to your hair type and styling preference. Use lower temperatures for finer hair, and higher temperatures for thicker hair.
• Hold your straightener so that the airflow is directed downwards and starts to pass sections of hair through the arms. Repeat until each section is dry.
• Change the airflow and temperature settings as required.

Refresh from dry

• Use Dry mode only to refresh your style.
• Unlock the arms and use the Mode select button to set your straightener to Dry mode.
• In Dry mode, your straightener has a choice of temperatures and an additional boost when needed.

Cool mode

• Use Cool mode to set your style. Hold your straightener with the arms shut and direct the airflow down the hair section to smooth and set.

Adjusting the temperature

• Press the Temperature control button to change the setting for your hair type and styling preference.

Boost

• Select Boost when styling dry hair for a shot of extra heat.

Adjusting the airflow

• Press the Airflow button to toggle between high and low airflow.

Idle mode

• Between passes, your straightener will activate Idle mode.
• Airflow will reduce, then increase as soon as you close the arms.

Auto pause

• To save energy, your straightener will auto-pause when left for three seconds with the arms open. It will activate again when you pick it up.

Stand-by

• To save energy, your straightener will go into standby if left unattended with the arms open for more than three minutes.
• Press the Power button to re-activate.
• Go to www.dyson.com.sg/products/hair-care/hair-styling-guidesfor styling tips and guides.

Idle mode may cause lights to dim

• High-power appliances, such as your Dyson Airstrait™straightener, may cause lights in your home to flicker or dim.
• They draw more electricity, which temporarily takes power away from other appliances on the same circuit.
• If light dimming occurs when using your straightener, try plugging it into a different outlet and circuit.
• A professional can help to identify suitable outlets.

Settings

• Your D y son A irs trait ™ s straightener has a settings menu to help you customise your machine to your usage.
• Press and hold the Mode Select button to access the menu on the LC D screen.

Idle mode

• You can enable or disable Idle mode on your machine.
• Press and hold the Mode Select button on your straightener until the menu appears.
• Press the Cool mode button to toggle between on and off.

Auto pause

• You can prevent your straightener from Auto-pauseing.
• Press and hold the Mode Select button on your straightener until the menu appears.
• Use the Mode select button to scroll through the menu options. Press the
• Cool mode button to select and press again to toggle bet we en on and off.

Units

• Press and hold the Mode Select button on your straightener until the menu appears.
• Press the Cool mode button to toggle between ° C and ° F.

Language

• Press and hold the Mode Select button on your straightener until the menu appears.
• Press the Mode select button to scroll through the language options.
• Press the Cool mode button to select the language you want and then press it again to confirm. A tick will appear on the screen to confirm your selection.

Factory reset

• Press and hold the Mode Select button on your straightener until the menu appears.
• Press the Cool mode button to start a factory reset.

Exit

• Use the Mode select button to scroll through to the Exit screen and press the Cool mode button to select.

Cleaning your machine

Your straightener has been precisely engineered. To maintain outstanding styling performance, it needs to be kept free from hair product residue and debris. A little regular maintenance will optimise performance.

Cleaning the filter

• Remove the filter
  • Unplug your straightener and let it cool down before cleaning your filter.
  • Hold the body of your straightener with one hand and the perforated filter unit with the other.
  • Pull down the filter unit to release it from the machine and onto the cable.
  • Gently pull the filter open and slide it off the cable.
• Wash the filter
  • Leave the filter unit to soak in warm, soapy water for at least 30 minutes.
  • We recommend using a clarifying shampoo or dish soap.
  • Using your fingertips, rub gently to thoroughly clean both the inside and outside surfaces of the filter.
  • Shake off excess water and leave for 24 hours in a well-ventilated place until completely dry.
• Replace the filter
  • Pull the filter open and slide it onto the cable.
  • Slide the filter unit towards the machine body, align and click into place.
  • Your straightener will alert you if the filter isn’t in place correctly.

Cleaning the tension bars

• Over time, hair product residue may build up on the tension bars.
• These bars sit at the top of the inside of each arm and it’s important to keep them clean and free from debris.
• Use a soft-bristled toothbrush and a small amount of warm water to brush away any debris. Dry with a clean, lint-free cloth.

Cleaning the diffusers

• The diffusers are attached to the sides of the straightener’s arms.
• We recommend these are kept clean, and free from debris and hair product residue. This will keep them functioning effectively.
• Ensure the machine is switched off then slide the diffusers off the ends of the arms.
• Use a damp, lint-free cloth to remove any debris and hair product residue. You can also use a soft-bristled toothbrush to remove any stubborn residue.
• Refit the diffusers to the arms once clean and fully dry. We recommend that you don’t use your straightener without the diffusers attached.

Deep cleaning the filter

• If the filter becomes blocked, you can deep clean it.

Remove filter unit

• Unplug your straightener and let it cool down before cleaning your filter.
• Hold the body of your straightener with one hand and the perforated filter unit with the other. Pull down on the filter unit to release it from the machine and onto the cable.
• Gently pull the filter open and slide it off the cable.

Wipe filter mesh

• Wipe the filter mesh with a dry, lint-free cloth to remove any debris.

Soak filter unit

• Leave the filter unit to soak in warm, soapy water for at least 30 minutes.
• We recommend using a clarifying shampoo or dish soap.

Remove inner filter

• Remove from the filter cage.

Rub gently, rinse, then dry

• Using your fingertips, rub gently to thoroughly clean each part. Rinse both parts of the filter unit to remove any debris.
• Allow both parts of the filter unit to air-dry completely or gently wipe with a lint-free cloth.

Replace inner filter

• Check that all debris has been removed before replacing the inner filter in the filter cage.

Replace filter unit

• Pull the filter open and slide it onto the cable.
• Slide the filter unit towards the machine body, align and click into place.
• Your straightener will alert you if the filter isn’t in place correctly.

Alerts

• Clean filter
  • You can continue to use your straightener but we recommend you clean the filter for optimum performance.
  • Scan the QR code on the screen to help fix this alert or follow the Cleaning your filter instructions above.
• Filter blocked
  • Your straightener won’t operate until the filter is cleaned.
  • Scan the QR code on the screen to help fix this alert or follow the Cleaning your filter instructions above.
• No filter
  • The filter isn’t fitted correctly or is missing. Your straightener won’t operate until fitted.
• Contact Dyson
  • There is a fault with your straightener. Please contact Dyson.
• Volt alert
  • Your machine has either been plugged into a power source with the incorrect voltage or the voltage is fluctuating.
  • Plug into a stable, compatible power supply.
• Too hot
  • Your straightener has become too hot and will need to cool down.
  • Turn off your straightener, unplug and leave to cool down.
• Reset
  • Your straightener has an error. Press the Power button to turn off your straightener and then turn it on again.
  • If this doesn’t clear the alert, turn off your straightener and unplug from the power source. Plug in and turn on again.

References

• Hair Styling Guides | Dyson Supersonic™, Airwrap™ and Corrale™ | Dyson Singapore
• Dyson 香港 | 官方網站 | 網上商店

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>