amazon basics B09JWS2NVJ Tilting TV Wall Mount Instruction Manual
- June 14, 2024
- amazon basics
Table of Contents
B09JWS2NVJ Tilting TV Wall Mount
Tilt TV Wall Mount for 12-lnch to 40-lnch TVs
Scan the QR Code and scroll through the images to find an assembly or how-to video.
https://www.amazon.com/dp/B09JWS2NVJ
Tools Needed
Voltage detector
Stud finder
Delivery Content
Important Safety Instructions
Read these instructions carefully and retain them for future use. If this
product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to
reduce the risk of injury including the following:+
CAUTION Risk of injury and/or property damage!
- Do not exceed the maximum weight indicated. This wall mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the wall mount and the attached Tv, causing possible injury and/or property damage.
- The product is suitable only for TVs with VESA hole patterns.
The product is intended for TVs up to 40 lbs (18.2 kg} of weight and display size of 12° – 40″. If your TV weighs more, this wall mount is NOT compatible.
Installation
For additional illustrated mounting/assembly/installation steps, refer to the
end of the written instructions.
This product should be installed by 2 adults. If in doubt, consult a
professional.
Refer to the instruction manual provided with the TV you are going to install
on this product. It includes additional information for mounting, ventilation
and suitable mounting locations. Compare the technical data and requirements
to make sure that this product is suitable for the TV.
Before mounting, determine the suitable mounting location. The product must be
fixed to a wooden or masonry/concrete wall using fasteners that are
appropriate for the mounting surface. Do not install on drywalls,
wall boards or thin plywood. The mounting surface must be capable of
supporting at least 4 times the weight of the product and the TV The maximum
wall covering thickness, such as gypsum drywall, lath, plastic, etc. should
not be greater than 0.63 (16 mm) for wood stud walls r 0.4 (10 mm) for
masonry walls.
For wood stud walls:
This product is designed to be mounted to Grade No.2 wood stud 2 x4 (51 mm x
102 mm).
Wood studs should be2 x4 (51 mm x 102 mm), at minimum: 1.5×3.5 (38 mm x 89
mm).
For concrete walls; The bracket must be installed into a solid concrete walt.
Make sure the concrete wall is suited for Standard Test Method for Compression
Strength of Cylindrical Concrete Specimens, AS7TM C39, 0r equivalent.
Do not rill into any pipes or power lines beneath the surface during mounting
holes preparation. Use voltage/metal detector before drilling any holes to
eliminate any such potential risks.
Do not modify the structure of this product in any way.
fte product is to be attached to any structure other than specified in this
user manual, only a licensed professional contractor/installer should perform
this installation. The mounting surface must support, at minimum, 4 times the
combined weight of the mounting bracket and the TV. It is the responsibility
and liability of the installer to ensure the suitability of the supporting
structure.
Never install onto furniture! This can lead to instability resulting in
personal injuries and/or property damage.
NOTICE
The product is made to fit various TVs with different dimensions. Not all
fasteners delivered are needed for installation of the product.
Before Assembly
DANGER Risk of suffocation
- Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
- Remove all the packing materials.
- Remove and review all components before starting assembly.
- Check the product for transport damages.
Disposal
Dispose of the product according to local regulations. If in doubt, consult d your local authorities.
Specifications
| Display size | 12-40 (30.5- 101.6 cm) |
|---|---|
| Max. load | 40 lbs (18.2 kg) |
| Mounting pattern | 2.929(75×75 mm) |
3.9×3.9° (100 100 mm)
7.9×3.9′ (200 x 100 mm)
7.9″x7.9′ (200 x 200 mm)
Tilt range| 12°(3to 9 up/down)
Profile| 1.5(358.2 mm)
Net weight| 1.56 lbs (0.71 kg)
Product dimensions (W x H x D)| 8.8×8.8×1.47
(22.3×22.3×3.73 cm)
MADE IN CHINA
Documents / Resources
|
amazon basics B09JWS2NVJ Tilting TV Wall
Mount
[pdf] Instruction Manual
C1CMiXZC41L, B09JWS2NVJ, B09JWS2NVJ Tilting TV Wall Mount, Tilting TV Wall
Mount, TV Wall Mount, Wall Mount, Mount
---|---