Tilswall M1 Electric Spin Scrubber User Guide
- June 14, 2024
- TILSWALL
Table of Contents
Tilswall M1 Electric Spin Scrubber User Guide
Intended Use
The electric spin scrubber can clear stains on the surface of objects by
rotating at high speed. It is mainly used for cleaning various indoor and
outdoor scenes such as bathroom, living room, and kitchen.
Small Flat Brush
Suitable for cleaning stoves in smaller areas and soap in the bathroom
Corner Round Brush
Suitable for curved surface, 360-degree no dead angle cleaning
Hard Flat Brush
Large contact area, efficient and quick for cleaning stains
Pointed Brush
Clean up the dust in the comer gap
USB Charging Cable
Installation and Use
Product Assembly
Before the first use, please insert all the protruding parts of the handle
into the metal telescopic rod. After insertion, it can not be disassembled.
Note:1 Please fully charge the electric spin scrubber before first use.
Brush Installation and Replacement
When the brush head is installed, align the triangular shaft and the concave
position of the brush head then rotate positively; rotate the brush head
reversely when disassembling. Align the triangular shaft and insert the
brush head and and rotate 60° positively for assembly inplace and rotate 60°
reversely to take out.
Extension Rod Operation
Press the release button on the handle and then pull the handle for extension; Push the handle for contraction.
Warm Tips
How to have a better cleaning?
Before using the electric spin scrubber to clean,please soak the stains with
cleaning solution for 5-10 mins.
Why does the brush head stop rotating when using?
Please hold the electric spin scrubber stick to aim at dirty spots without
applying too much pressure on the rotating brush head,or the brush could be
cut off and get damaged.The brush head will stop rotating.
Why do all the indicator lights keep flashing?
Please check whether the handle and the body are assembled in place.After
assembly, when the indicator lights stop flashing, Restart the machine
Errors and Corrective Measures
Doesn’t work after power on| Please check if it’s in charging status. Unplug
the charger and restart it.
---|---
Please check whether the handle and the telescopic rod are assembled in
place.After assembly, restart the machine.
Please restart it or check if the battery capacity’s sufficient.
Unable to charge| Charging indicator lights are off. Please check if the
charger is well inserted.
Stop working| If it stops working suddenly, please restart it or check if the
battery capacity is sufficient.
After-Sales Service
If you have any problems during use, please contact us with this email: support@tilswall.comor official website: www.tilswall.com, we will help you solve it as soon as possible, your goodexperience is our life long pursuit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>