LG S95QR Wi-Fi Sound Bar User Manual

: June 14, 2024
: LG

Table of Contents

S95QR Wi-Fi Sound Bar
Installing and Using the Product
Specification
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SIMPLE MANUAL
Wi-Fi
SOUND BAR
WLAN SOUNDBAR

S95QR Wi-Fi Sound Bar

DS95QR
(SPQ9-SL, SPQ9-SR)

MFL71879569

2201_Rev01
FSC
www.fsc.org
MIX
Paper from
responsible sources
FSC™ C160405
www.lg.com
Copyright © 2022-2023 LG Electronics Inc. All Rights Reserved. LG S95QR Wi-Fi
Sound Bar - Fig Replacement of Battery

Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

LG S95QR Wi-Fi Sound Bar - QR Cord 1 https://www.lg.com/global/ajax/common_manual

A Sound bar
B Remote Control Receiver / Status Display
C Wireless Rear Speakers
D Wireless Subwoofer – Install it close to the sound bar.
E External Device – (Blu-ray player, game console, etc.)

Connect the sound bar to your TV via an optical cable or an HDMI cable.
If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
Connect to power in the following order: wireless subwoofer ⇒ wireless rear speakers ⇒ sound bar. Then, turn on the sound bar. When the connection is automatically established with the sound bar, the LEDs on the wireless subwoofer and wireless rear speakers will light up green.
Using the product with your TV
1 Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
2 On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
3 When the TV is properly connected to the product, “OPT”, “ ARC”, or “E-ARC” will appear on the status display with a sound.
You can enjoy the sound by connecting LG WOWCAST (Sold separately, WTP3) to the sound bar wirelessly.
Connecting the product to your smartphone via Wi-Fi
1 Connect your smartphone to Wi-Fi.
2 Install the LG Sound Bar app on Google Play or the App Store.
3 Run the LG Sound Bar app and follow the instructions.
4 The product will connect to your smartphone and you can control the product with LG Sound Bar app.
Connecting the product to your smartphone via Bluetooth
1 Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off > On)
2 Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
3 Find and tap “LG_Speaker_DS95QR_XXXX” or the name you registered on the Google Home app.
4 When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” ⇒“Connected Bluetooth device name” ⇒ “BT”.

If you see a red LED on the back of the wireless subwoofer or wireless rear speakers, it means that the sound bar is not connected to the speakers. If this is the case, connect them in the following order.

Press the Power button on the sound bar to turn it off.
Press the PAIRING button on the back of the disconnected wireless subwoofer or wireless rear speakers. Check if each LED blinks green.
– If you still see a red LED on the back of the wireless subwoofer or wireless rear speakers, press and hold the button on the back of the subwoofer or wireless rear speakers again.
Press the Power button on the sound bar to turn it on.
When the connection is established, you will see a green LED light on the back of the wireless subwoofer or wireless rear speakers light up green.

Keep the sound bar, the subwoofer and wireless rear speakers away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
Design and specifications are subject to change without notice.
Google Play is a trademark of Google LLC.

Specification

Power requirements

Refer to the main label.

Power consumption

Refer to the main label.
Networked standby: 2.0 W

Sound bar dimensions (W x H x D): Approx. 1200.0 mm x 63.0 mm x 135.0 mm
Wireless rear speakers dimensions (W x H x D): Approx. 159.0 mm x 223.0 mm x 142.0 mm
Bus Power Supply (USB): 5 V **500 mA
Amplifier (Total RMS Output power): 810 W RMS
How to deactivate the wireless network connection(s).**
Press and hold the Power button for 3 seconds or longer to turn off the product.
Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL, MPL, and other open source licenses that have the obligation to disclose source code, and to access all referred license terms, copyright notices and other relevant documents, please visit https://opensource.lge.com. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid to anyone in receipt of this information for a period of three years after our last shipment of this product.

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wi-Fi SOUND BAR is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#
The use of the 5150 – 5350 MHz and 5945 – 6425 MHz band (if applicable) is restricted to indoor use only. This restriction exists in Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), Northern Ireland (UK(NI)), Switzerland (CH), Iceland (IS), Liechtenstein (LI), Türkiye (TR) and Norway (NO). For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.

Frequency range	Output power (Max.)
2402 to 2480 MHz	9 dBm
2412 to 2472 MHz	20 dBm
5180 to 5320 MHz	23 dBm
5500 to 5700 MHz	23 dBm
5730 to 5850 MHz	13.35 dBm

Hereby, LG Electronics declares that the radio equipment type ACTIVE REAR SPEAKER is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.