DREO DR-HAP002S Air Purifiers for Bedroom User Manual
- June 14, 2024
- DREO
Table of Contents
- DREO DR-HAP002S Air Purifiers for Bedroom
- IMPORTANT SAFETY INSTRUCTIONS
- General Safety
- Specifications
- KNOWING YOUR AIR PURIFIER
- About the Filter
- Getting the Most Out of Your Air Purifier
- CONNECTING TO YOUR AIR PURIFIER
- USING YOUR AIR PURIFIER
- Controls & Lights
- Air Quality Indicator Light
- General Operations
- Additional Features
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- DREO CUSTOMER CARE
- FCC Statement
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DREO DR-HAP002S Air Purifiers for Bedroom
IMPORTANT SAFETY INSTRUCTIONS
READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.
General Safety
- Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury.
- Children shall not play with the appliance. Cleaning and maintenance shall not be performed by children without supervision.
- This appliance can be used by children aged above 8 years and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of this appliance in a safe way and understand the hazards involved.
Location Safety
- Always place the appliance on a level, stable, and dry surface.
- Keep the appliance away from heat sources to avoid fire hazards.
- Do not place the appliance in excessively humid environments.
- Do not place the appliance directly on or against soft furnishings such as bedding or curtains. Doing so could cause blockage of the openings.
- Do not use the appliance outdoors, in toxic or explosive environments, or where flammable or combustible gases are present.
- Allow at least 15 in / 38 cm of clearance on all sides of the appliance.
Operation Safety
- Do not immerse in water and any other liquids.
- Do not plug in or operate the appliance with wet hands.
- Do not sit, stand, or place heavy objects on the appliance.
- Do not insert your fingers, pencil, and any other objects into any openings.
- Do not attempt to repair or modify any electrical or mechanical functions on the appliance. Doing so will void your warranty. All servicing should be performed by qualified personnel only.
Electricity Safety
- To avoid fire or shock hazards, plug the appliance directly into a wall outlet.
- Make sure that the voltage of your power source is the same as that specified on the appliance.
- Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.
- Always unplug before cleaning or leaving the appliance unused for a long period of time.
- Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, or has been dropped or damaged in any manner.
- Do not run the cord under the carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from the traffic area so that it will not be tripped over.
- WARNING: To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device.
FOR HOUSEHOLD USE ONLY READ AND SAVE THESE INSTRUCTIONS
Gentle Reminder:
- Check the appliance regularly and refer to TROUBLESHOOTING or contact our customer support if it shows any of the following signs:
- The power cord or plug is damaged.
- Loud noise, unusual smell, or excessive heat.
Specifications
- Power Input 120V ~ 60Hz 1.0A
- Rated Power 36W
- Dimensions 9.84×9.84×15.2 in / 250x250x386 mm
- Weight 7.3 lb / 3.3 kg
KNOWING YOUR AIR PURIFIER
Package Contents
About the Filter
The filter uses 3-stage filtration system which is composed of a pre-filter, a H13 HEPA filter, and a high-efficiency activated carbon filter.
- Pre-Filter
- H13 HEPA Filter
- High Efficiency Activated Carbon Filter
- To maintain the optimal performance, please replace the filter every 6-8 months.
- Keep away from water and humid areas. Moisture will allow mold to grow.
Getting the Most Out of Your Air Purifier
- Keep the doors and windows closed when the air purifier is on.
- Do not block the air openings and keep away from curtains or walls.
- Maintain and replace the filters on a regular basis for maximum efficiency.
- If the indoor air quality is bad or you would like to speed up the purification process, it’s recommended to turn on Turbo Mode TURBO first, then switch to Auto or other modes after the air quality improves.
CONNECTING TO YOUR AIR PURIFIER
- Before connecting the appliance to your mobile device, please scan the QR code on the left or go to the app store and search “Dreo”, then select and download the app.
- You can use the Dreo app to connect your smart air purifier to Amazon Alexa or Google Home. Please follow the in-app instructions to set up your voice assistant.
- NOTE: You must create a Dreo account to access voice assistants.
- Launch Dreo and sign in or create account by following in-app instructions.
- Enable Bluetooth on your mobile device and plug in your air purifier.
- Tap Add Device and select the air purifier you want to link.
- Hold the WiFi button for 5 seconds to start WiFi connection settings.
- (TIP: The WiFi indicator will keep flashing when pairing.)
- You’re now ready to control the appliance on your app.
- (TIP: To restart connection settings, hold the WiFi button again for 5 seconds.)
- App Store is a registered trademark of Apple Inc.
- Google Play and the Google Play logo are trademarks of Google LLC.
USING YOUR AIR PURIFIER
Getting Started
- Put it upside down. Rotate the bottom cover to unlock and take the cover off.
- Remove the filter from its packaging then put the filter back.
- Press and rotate the bottom cover clockwise to lock back in place.
- Return to upright position on a flat, stable, and clear surface.
Controls & Lights
Filter Reset Button
- Long press for 5 seconds to reset the filter change reminder.
WiFi Connection Button
- Long press 5 seconds to start WiFi connection settings.
Timer Button
- Select a time to turn on/off after 2H, 4H, or 8H.
Turbo Mode Button
- Select to purify the air at the highest power setting.
- Note: Turbo mode may be louder than other lower fan speed settings. We recommend its use only when the air quality is extremely poor.
1 Filter Change Reminder
- Lights up in red when the filter should be changed.
Sleep Mode Button
- Select to purify the air at the most silent power setting.
Auto Mode Button
- Select to purify and adjust fan speed automatically based on air quality conditions.
Manual Mode Button
- Select to purify the air with adjustable fan speeds.
Power Button
- Select to turn power on or off.
- Long press 10s to reset to factory settings.
Air Quality Indicator Light
- After the air purifier is turned on, the air quality indicator light will cycle through Red, Orange, Green and Blue colors for 30 seconds, then the air quality sensor will begin to gauge the air quality in the environment.
- Note: The air quality sensor detects PM 2.5 particles but cannot detect odors.
Light Color Air Quality Level
- Blue Excellent
- Green Good
- Orange Moderate
- Red Poor
General Operations
- Insert the power cord intothe air purifier and an electrical outlet.
- Touch the power button to turn on the air purifier.
- Choose your desired working mode.
- Touch the power button to turn off the air purifier.
Additional Features
- Child Lock
- When child lock is turned on, all the buttons on the air purifier will be locked.
- This feature is available in the Dreo app.
- On/Off Timer
- When the air purifier is ON/OFF, touch the timer button repeatedly to set a time (2/4/8H) for the air purifier to turn OFFION.
- To cancel, press and hold the timer button for at least 2 seconds.
- Memory
- If the air purifier is turned OFF or disconnected.
- from power, it will operate under the previous
- settings (except the timer and child lock setting) when it is turned ON again.
- Note: Touch the Turbo button 5 times in 3 seconds to activate Hyper Turbo mode.
CLEANING AND MAINTENANCE
Replacing the Filter
The filter life is measured by the air purifier’s algorithm which is based on the working mode, fan speed, run time, and indoor air quality. It’s recommended to replace the filter every 6-8 months or when the filter change reminder alerts.
- The Filter Change Reminder will flash when the filter needs to be replaced. Turn off and unplug the air purifier.
- Rotate the bottom cover to unlock then take the cover off
- Remove the old filter then put the new filter in place.
- Press and rotate the bottom cover clockwise to lock in place.
- Return to upright position and long press the Filter Reset Button for 5 seconds until it beeps, to reset the filter change reminder.
Cleaning the Inside & Outside
- Unplug the air purifier before any cleaning and maintenance.
- Remove the filter and clean the inside with a dust vacuum.
- Wipe clean the housing with a dry, soft, non-abrasive cloth.
- Open the cover at the back and clean the AQ sensor with a dust vacuum.
Cleaning the Filter
For optimal use, the outer pre-filter can be cleaned with a soft, dry brush once every 2-4 weeks.
TROUBLESHOOTING
Related to the Filter
- Where can I buy a new fllter?
- Please purchase from Oreo official website: www.dreo.com.
- I changed the filter, but the FIiter Change Reminder ls still on.
- The Filter Change Reminder will not automatically reset. Please press and hold the Filter Reset button to reset the reminder, the indicator will turn off after reset.
- The Filter Change Reminder has not turned on for a long period of time.
- There are several factors that can impact the filter life, including the indoor air quality level, length of operation and particle density in the air. If your room has a better air quality level and/ or you don’t use your air purifier often, the reminder will take longer to light up
Related to Use
- Why ls my air purifier not working?
- Check if the power is connected, the power cord is damaged, or the electrical outlet is powered.
- The airflow from my air purifier Is too weak.
- Make sure that there is enough space around the air purifier.
- Check if the filter packaging has been removed.
- Fan speed will be low when auto mode is switched on and air quality is good. Try to switch to higher speed or turbo mode.
- Replace the filter if the filter is clogged and overloaded.
- My air purifier doesn’t Improve the alrquallty.
- Check if the filter packaging has been removed.
- Make sure the windows are closed as polluted air may continue coming in from outside of the windows.
- The overloaded filter will make the fan work harder to pass the air through. Consider replacing the filter if it is clogged.
- Do not place in crowded areas and corners.
- Check if air outlet and inlet are obstructed.
- Why ls my air purifier making a loud noise?
- The turbo mode will produce higher noise level as the fan is at the maximum speed to clean the air in the room more quickly.
- Switch the air purifier to sleep mode or lower fan speeds.
- Why ls my air purifier making an unusual noise?
- Make sure the air purifier is operating on a flat, stable surface.
- Check if the filter is placed properly or the filter packaging has been removed.
- If the unusual noise still exists, there may be external objects blocking the air openings. Please contact our customer support.
- Why does my air purifier produce an unpleasant smell?
- During the initial few days, new air purifiers produce a plastic smell which is normal and will dissipate eventually.
- Do not add essential oils or diffusers into the air purifier or use in a excessively humid area. Humidity will cause mold to grow.
- If the filter has absorbed pollutants to its maximum capacity, then the smell may come from from the dirty filter. Please replace the filter when necessary.
- The odor In the room Is very strong, but the air quality Indicator Is only green or blue.
- The Air Quality Sensor detects PM 2.5 particles but cannot detect odors. If you feel that the indoor air odor is relatively strong, it is recommended to manually switch to the highest fan speed.
- If your problem is not listed or still persists, please contact our Customer Support
DREO CUSTOMER CARE
Default 12-Month Warranty
- This appliance is covered by Oreo warranty for 12 months from the date of its original purchase.
Extend Your Warranty
- Extend your warranty by registering your new appliance on our website https://dreo.com/warranty.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs. service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Oreo.
- We can only provide after-sales service for products that are sold by Oreo or Oreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.
FCC Statement
This device complies with Part 15 of the FCC Rules.
This equipment has been tested and found to comply with the limits for a
Consumer ISM equipment, pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses and can radiate radio
frequency energy and,if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
Please note that changes or modifications of this product is not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.”
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
We’re Here to Help!
- support@dreo.com
- www.dreo.com
- 888-290-1688
- Mon – Fri, 9:00 am-5:00 pm PSTi?DT
- facebook.com/groups/dreohome
- www.dreo.com
- Shenzhen Hesung Innovation Technology Co .. LTD
- 26F, Bldg A 7, Creative City, Shenzhen, China
EXTEND YOUR WARRANTY FOR FREE
Scan or vis it dreo.com/warranty to extend your warranty by registering your product. If you need any help, don’t hesitate to reach out to us!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>