Topcony ZS-GX6S Wireless Outdoor Solar Powered Security Cameras User Guide
- June 14, 2024
- Topcony
Table of Contents
ZS-GX6S Wireless Outdoor
Solar Powered Security Cameras
Official Website:
topcony.com
Email: service@topcony.com
- Scan the QR code to acfivate the warranty immediately and extend ‘the warranty to 24 months.http://qr.hotlnk.cn/url/79840508799
- Scan the QR code fo sign up as a premium member of Topcony and you can get professional and timely pre-sale, in-sale and after-sale support.
http://pic.sopili.net/l/facebook/page/110313687244792 - Scan the QR code to watch more operation video about camera, such as how fo add a camera to APP, how fo share the device with others thro-ugh the APP and how to set the motion detection alarm, etc.https://www.youtube.com/channel/UCD4xT9WyRTc1pEgj5DNkfXA
Safety Statement
FCC Statement
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including inferf- erence that may cause undesired operation,
Warnings: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment,
Note: This equipment has been tested and found to comply with the limifs
for a Class B digital device, pursuant fo Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause har-
mful interference to radio communications, However, there is no guarantee that
inferference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by tuming the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that fo which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements,
The device can be used in fixed/mobile exposure condition.
The min separation distance is 20cm.
After-sale Support
Dear friends,
Thank you very much for supporting Topcony!
Please read this manual thoroughly before using this wireless security camera.
If you have any issues, please email your order number and the problem TO
service@ioncony.com. Receiving your message, we
will provide a fast solution in 24 hours.
Please do not worry. Actually, many problems can be easily solved by seffing,
such asNetworking Connection Fails, Motion Detection Delay, Solar Panel
Charging. False Alarm, Battery Management etc. We promise all the cameras have
been carefully checked and packaged before shipping.
BTW. we offer the litetime technical support for your camera, and are happy o
provide all possiole support for you. If you have any quesfions or ambiguifies
during using, please feel free to contact us. We will ry fo find @ good
solution with our professional camera engineers.
Warm Regards,
Topcony Service Team
Notes
- The comera only supports 2.4GHz WIF.,
- Before connecting this camera fo the WiFi, please ensure the Wi-Fi signal strength is o be over than 85%. If the camera is for away from the signal source, it won’t be connected successfully for the first fime.
- f your router is connected with too many devices, the camera will fail to connect Wi-Fi because of the IP address conflict,
- To safeguard your privacy, this camera just supports APP control. It don’t support PC Browser and other Software,
- This wireless camera supports events recording when Wi-Fi disconnected. oIt will speed up the power consumption of the battery if you always watch the live footage o the recorded videos from the SD card. Plecse charging the camera fimely based on the low power reminder. (Before using the camera for the first fime, please fully charge the camera with the power cord in the packags)
Product Introduction
| 1 | Microphone | 8 | Reset Key |
|---|---|---|---|
| 2 | Charging Indicator | 9 | Waterproof plug |
| 3 | Lens | 10 | SD Card Slot |
| 4 | PiR | 11 | Cherging Port |
| 5 | Working Status Light | 12 | |
| 6 | spoflight & IR Light | 13 | Speaker |
| 7 | Power Key | ||
| Power Key | Press and hold for 5s for power on /off the camera | ||
| --- | --- | ||
| Reset Key | Press and hold for 5s until hearing *Boogu’ to reset or restore to |
factory setting
SD Card Slot| Support local SD card storage (up to 128G)
Charging Indicator| Red means charging., blue means fully charged
Working Status Light| Solid on red: Network is abnormal
Slow flickering red: Waiting Wi-Fi connection and start adding devices
Wi-Fi fost fickering red: Wi-Fi connecting
solid on blue: Wi-Fi connected successfully, the camera running normally
Charging Port| Use 5V 2A power adapter o charge fhis camera
APP Installation and account Registration
-
Download Topcony Cam’ APP
Method 1: Download ‘Topcony Cam’ APP from APP Store (I0S) or Google Play (Android):
Method 2: Scan Topeony Cam’ APP QR code fo download if,
Method 3: Download and insfall ‘Tepcony Cam’ APP via our Official Website: efopeony.com
Enter the URL: www.topcony.com and then click Support -Downlood
Center. Choose DOWNLOAD APP and you can download and instail ‘Topcony Cam’ APP,
Tip1 : Our security camera supports “Topcony Cam® and “CloudEdge” App
connection. If our *Topcony Cam’ APP cannot be used nomally, you can fry fo
download the “CloudEdge® APP to connect the camera. If you don’t know how fo
download “CloudEdge” APP, pis reach out fo the Topcony Affer-sales support for
further assistance.
Topcony Official Email: service@lopcony.com.
Tip2: Please tum on 2 below permissions while using this APP for the
first time.
- Allow Topcony Cam’ APP fo access mobile cellular data and wireless LAN or if will fail to add IP camera.
- Allow Topeony Cam’ APP fo recelive pushed message or the phone will not
receive alarm push when motion detection or audible alarm is
friggered.
- . Register Account
New users need fo register by emall, The concrete steps are as following:
- Click ‘Register”
- Follow the steps fo complete the registration of the account;
3)Log in.
Note:
- When registering a new account, plecse choose fhe region which you are actully in and correct country code. (Different registered regions can’t share the camera,)
- Plaase choose fo register by e-mail.
Howb to add a Camera To APP
Before Using
- Please insert the Micro SD card before power on, otherwise, the SD card cannot be detected,
- Put the camera and smart phone 1-3 ff (30-100 cm) away from the router 1o set Wi-Fi,
- Make sure that the camera is using 2.4GHz Wi-Fi. Wi-Fi Connection Steps
(Note: If it can’t be powered on, please plug in DC 5V 2A power adopter o charge the camera for 15min first)
My camera fails to connect Wi-Fi?
- Please moke sure the Wi-Fi the camera connected is 2.4GHz. In our expsrience. network connection is falled in most cases, which is caused by that users used 5GHz WIFL,
- Make sure fne password correction of the Wi-Fi. (Note: the password of the WiFi cannotinclude single quote, underiine, space and virgule (/)
- Checkthe number of the devices your router connected, In general. the router has o connection limits, Once the devices fhat your router connected excess the its max limit numbers, other devices wil cannot connect the router.
- Make sure fne QR code on the phone screen is normal and the distance between the phone and fhe camera lens is 10-15cm (39-5.9inch) duringthe scanning process.
- After checking the above information, if the comera cannot connect the Wi-Fi please fry o re-download the APP, reset the camera and restart the router, and then odd the cameraagain.
- It you tried all steps, but still no luck, please message your order and problem fo service @iopcony.com o enter Topcony
Official Webisite and Click “CHAT” button on ‘Topcony Cam’ APP 1o stert an online chat.
Camera Installation
Please make sure before Installing;
- The wall or surface where you want fo install the camera is fiat.
- Please do not install the camera at a position that nears heat source, such as Air conditioner outdoor unit and kitchen smoke outlet.
- Ty to avold nstalling the product on the side of a lively road, Frequent pedestrians and vehicles will keep waking up the camera, resuilting in frequent alarm messages and extremely fast power consumption,
FAQs
For more detailed FAQs, please log in to the APP, search in ‘& -“Help ‘ Battery Camero®
The device prompts offine?
- Check whether the equipment is in the power-on state, and observe whether the working light of the equipment is on normally. 2) Check whether the Wi-Fi network s in good condiition and restart the router. 3) If the device is located far away from the router, which resulfs in the inability to obtain a good Wi-Fi signal, it is recommended o move the router to a closer place or add a Wi-Fi amplifier fo improve the Wi-Fi performance of the home. 4) Delete the camera from your ‘Topcony Cam’ or CloudEdge account and add it again after resetting the device. Check whether the device firmware and application program are the latest version.
Update router or Wi-Fi possword?
Delete the camera from your Topeoeny Cam’ or “CloudEdge’ account. After resetling the device, use the new Wi-Fl and password to add it again
Can't play historical video?
- Check he status of the D card in *Setfings o ensure that the SD card has been successfully recognized. 2) Reinsert the SD cara, 3) Inthe application, format the D card, 4) Try another new SD card.
Alarm push frequently?
- In the app, lower the sensitivity of the motion detection alarm. 2) Check whether there are objects that inferfere with and frigger the PIR sensor in the. field of view of the device, such as the outdoor unit of the air conditioner, airiving cars, passing pedestrians, etc. The angle of the device can be adjusted appropriately to avoid these easily disturbing objects 3) Tum on *human motion detection’ and use humanold algorithm to filter useless alarms,
The phone cannot recelve the alarm push?
- Tur on all the push permissions of the “Topcony Cam’ or “CloudEdge” application in the system seftings of your mobile phone. 2) Make sure inat the device's motion defection function is successfully turned on. 3) Restart the phone, and clear the cache on Android phones. 4) Check whether the network Is good.
Why the camera does not have color night vision?
- Click on Motion Defection and fun if on. 2) Click on audio warning and strobe light. you can choose audio/ light waming or audio warning and strobe light. 3) Then you can enjoy the camera's color night vision and three alarm modss. (The device needs fo be tumed on with audio warning and strobe light fo produce a color video event.)
If your problem still cannot be resolved, pls reach out o the Topcony After- sales support for further assistance. Official Email: service@Giopcony.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>