mukuxin ‎FLJ-012-F1 LED Floor Lamps User Manual

mukuxin ‎FLJ-012-F1 LED Floor Lamps

Thank you for choosing our products. Please read the user manual carefully and keep it for further reference. Please follow the instructions during installation and use. The floor lamp can be controlled by the remote control or foot switch after assembled.

Note

1. The remote control has been paired with the floor lamp before delivery.
2.  The bulb is included, which is dimmable and compatible with the lamp. If need bulb replacement, please contact us immediately via the store.
3. Please make sure the input voltage is AC100-120V.

Specifications

Package list

|

|
C. Top Bracket x 1

A. Lamp x 1| B. Remote Control x 1| D. Bottom Bracket x 1
| |
G. Nut x 1
E. Bulb x 1| F. Lampshade x 1| H. Base x 1

Assembly

• 1 Connect the straight tube and the lamp holder tube.
• 2-4 Connect the straight tube to another straight tube.
• 5 Connect the straight tube to the base.
• 6 Put the velcro at both ends of the lampshade together.
• 7-8 Clip the bracket to the lampshade.
• 9 Remove the lamp nut located on the lamp holder;
• 10 Install the assembled lampshade to the lamp holder, lock the lampshade on the lamp holder with the lamp nut;
• 11 Install the bulb to finish the assembling.

NOTE: The lamp nut is on the lamp holder and needs to be unscrewed.

Use Tips for the Remote Control

On/off: Step on the foot switch, or Press the power button of the remote control.
Color Temperature: Press the ” ” button.
Short Press: grading adjustment, Long Press: stepless adjustment.
Brightness: Press the ” ” button.
Short Press: grading dimming, Long Press: stepless dimming.

Check if the remote works:
Install the battery (not included) to the remote. Plug to the power supply and check if every button works well. If the remote control doesn’t work for the lamp, please check whether the indicator light lights up or not. If it is on, please try to match the code (refer to “Matching Process”). If it still doesn’t work, please clear the code (refer to “Code-clearing Process”) and match the code again. Or please contact us immediately.

Matching Process:

1. Connect the power supply and turn on the lamp.
2. Within 1 minute of power-on, press the power button of the remote and hold on around 3 seconds.
3. When the light flashes, it matches successfully.

Code-clearing Process:
Switch on and off the foot switch for 5 rounds (step 10 times). When the main light flashes, it means clear the code successfully.

WARNING:

• Please cut off the power before assembly, cleaning or replacing.
• Keep it away from flammables and fire source.
• The lamp works in a dimming circuit.
• Keep it away from water.
• Assemble the lamp according to the instructions and do not reassemble.
• Do not stare at the lamp for a long time.
• Assemble, take apart or move the lamp gently.
• Please do not cover anything on the lamp head and avoid bending and  bumping the lamp pole
• Keep it away from little child.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>