SiFENE 3105 Cold Press Juicer User Guide
- June 14, 2024
- SiFENE
Table of Contents
Quick Start Guide
This Quick Start Guide is designed for first time use.
For safety and more information, refer to your USER MANUAL
What’s Included
- Main Body
- Operation Panel:REV, OFF, SOFT, HARD
- Unlock Button
- Juice Cup
- Pulp Cup
- Pusher
- Juice Container
- Auger
- Fine Strainer
- Juicing Body Cover
How to Assemble
Step 1
Connecting juicer:
- Align feed chute with “unlock mark.”
- Turn counterclockwise until click.
Step 2
Align auger shaft with motor shaft, push to bottom. (Adjust by turning auger
if misaligned.)
Step 3
Insert fine strainer’s large hole at screw propeller’s tail, push positioning
ribs into juicer’s notch.
Step 4
Align three buckles on cover and body, push in, rotate counterclockwise to
tighten cover and body.
Step 5
Place the juice cup next to the fuselage, and place the pomace cup under the
slag outlet of the juice extractor.
How to Use
REV button: When the slag discharge is not smooth or clogged the key is
used.
OFF button: Motor stops working.
SOFT button: Low-speed working button(suitable for picking soft fruits
and vegetables such as tomatoes, watermelons, and grapes);
HARD button: High-speed working button (svitable for extracting hard
fruits and vegetables such as carrots, and apple pears).
Tips to avoid clogging in juicers
- Cut the ingredients into 1″ -1.5″ small pieces before juicing.
- Feed the ingredients into the juicer gradually.
- Ensure the pusher is firmly in place when feeding produce into the juicer.
QUESTIONS OR CONCERNS?
SiFENE supports free replacement for any problems or refund for any
dissatisfaction under warranty.
CONTACT US!
Email: support@sifene.com
Web: https://sifene.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>