SiFENE 3301 Compact Cold Press Juicer Single Serve Slow Masticating User Guide
- June 14, 2024
- SiFENE
Table of Contents
QUESTIONS OR CONCERNS?
SiFENE supports free replacement for any problems or refund for any
dissatisfaction under warranty.
Quick Start Guide
This Quick Start Guide is designed for first time use. For safety and more information, refer to your USER MANUAL
What’s Included
- Main Body
- Operation Panel: ON/OFF,REV
- Unlock Button
- Juice Cup
- Pulp Cup
- Pusher
- Juice Container
- Auger
- Fine Strainer
- Juicing Body Cover
How to Assemble
Step 1
Connecting juicer:
- Align feed chute with “unlock mark.”
- Turn counterclockwise until click.
Step 2
Align auger shaft with motor shaft, push to bottom. (Adjust by turning auger
if misaligned.)
Step 3
Insert fine strainer’s large hole at screw propeller’s tail, push positioning
ribs into juicer’s notch.
Step 4
Align three buckles on juicing body cover and juicing body, push it in, rotate
counterclockwise to tighten cover and body.
Step 5
Place the juice cup and pulp cup.
(the high-end side of the pulp cup is closer to the slag outlet, which is more
conducive to receiving the slag)
How to Use
“REV” key: when the slag discharge is not smooth or the rotor is blocked,
the key is used.
ON/OFF key : use the key for normal work, and it is also the key to close
and stop.
Tips to avoid clogging in juicers
- Cut the ingredients into 1″ – 1.5″ small pieces before juicing.
- Feed the ingredients into g the juicer gradually.
- Ensure the pusher is firmly in place when feeding produce into the juicer.
CONTACT US!
Email:support@sifene.com
Web:https://sifene.com/