SiFENE 8824 Vertical Cold Press Juicer User Guide
- June 13, 2024
- SiFENE
Table of Contents
SiFENE 8824 Vertical Cold Press Juicer
Important Safeguard Information
- The juicer has a safety lock setting which means the juicer will not work until the juicer has been fully installed.
- The juicer motor has an overheat protection feature. When overloaded, the motor’s thermal protector will automatically cut off power. “EO” will display on the screen. Let the motor rest for 20-30 minutes to cool down. It will then be ready to use again.
What1s Included
- Juice cup
- Pulp cup
- Auger Juice screen
- Main body
- Juice container
- Drum lid
- Pusher
- Cleaning brush
How to Assemble
Step 1
Place the juice container on the main body. Match the 3 notches at the
bottom of the juice container.
Step 2
Put the juice screen into the juice container, aligning the dot with the
dot.
Step 3
Place auger. Turn and press it down until auger clicks into place.
Step 4
Place the drum lid, aligning the dot on the drum lid with the dot on the
juice container.
Step 5
Turn clockwise rotation to close, aligning the dot on the drum lid to the
lock.
Step 6
Place the juice/pulp cup separately.
Press the ON/OFF button to turn the appliance on
FORWARD:
Pulls down and squeeze the ingredients slowly.
REVERSE:
Pushes the ingredients back up if it is stuck.
ON/OFF:
Starts I Stops operation.
Tips to avoid clogging in iuicers
- Cut the ingredients into l ” -1 .5″ small pieces before juicing.
- Feed the ingredients into the juicer gradually.
- Ensure the pusher is firmly in place when feeding produce into the juicer.
SiFENE supports free replacement for any problems or refund for any dissatisfaction under warranty.
CONTACT US!
Email: support@sifene.com
Web: https://sifene.com/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>