XTREMTEC XT-K101A Wireless Keyboard and Mouse Instructions
- June 14, 2024
- Xtremtec
Table of Contents
XTREMTEC XT-K101A Wireless Keyboard and Mouse
Product Information: XT-K101A Keyboard & Mouse Combo
The XT-K101A Keyboard & Mouse Combo is a wireless keyboard and mouse set that comes with a 2.4G USB receiver. It is designed for plug-and-play use and can be easily paired with your device.
2.4G USB Receiver Setup Guide
The XT-K101A Keyboard & Mouse Combo comes with only one USB receiver, and it
is pre-paired to enable plug-and-play use. If the original USB receiver is
lost or damaged, please setup a new receiver following these instructions. The
USB receiver need to pair to the keyboard and mouse separately.
USB Receiver Setup Guide
If the original USB receiver is lost or damaged, you can set up a new receiver using the following instructions:
Pairing the Keyboard
- Turn on the keyboard.
- Press and hold the ESC and Q keys together to start the pairing process. The battery indicator on the keyboard will flash rapidly.
- Insert the USB receiver into your device within 10 seconds of starting the pairing process. Make sure to place your keyboard close to the USB receiver.
- Once paired successfully, the battery indicator will flash slowly three times and then go out.
- If the connection is not successful, the battery indicator will go out after flashing rapidly for 10 seconds. In such cases, unplug
the receiver, turn off your keyboard, and repeat the pairing process starting from step 1.
Pairing the Mouse
- Press and hold the right button and middle button on the mouse simultaneously. Keep holding them while switching the power switch to ‘ON’. Wait for about 2 seconds and then release the buttons. The DPI indicator on the mouse will flash rapidly.
- Insert the USB receiver into your device within 10 seconds of starting the pairing process. Place your mouse close to the USB receiver.
- Once paired successfully, the DPI indicator will flash slowly three times and then go out.
- If the pairing is not successful, the DPI indicator will go out after flashing rapidly for 10 seconds. In such cases, unplug the receiver, turn off your mouse, and repeat the pairing process starting from step 1.
Following these instructions will allow you to set up a new USB receiver for your XT-K101A Keyboard & Mouse Combo. Enjoy using your wireless keyboard and mouse!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>