RadiantFlux A14ceywyMnL Warm White LED Strip Lights User Guide

June 14, 2024
RadiantFlux

RadiantFlux A14ceywyMnL Warm White LED Strip Lights

DISCLAIMER: These instructions are suggested installation procedures only. Capitonid assumes no Inability for problems, damages, or expenses that may occur from improper installation or product failure. These instructions do not constitute professional installation and may not necessarily meet all electrical requirements in your state. If you are uncomfortable with any of these procedures please contact a licensed electrical contractor.

GENERAL INFORMATION

The Radiant Flux LED flexible tape light featuring high brightness, high color rendering index 2835 LEDs and durable printed circuit board (PCB). The excenent thermal conduction maintain a less lumen depreciation and long bright effect. Designed for dry indoor locations using only. It’s dimmable with rotary-style dimmer (turn on/off, and dimming).

TECHNICAL DATA

The Radiant Flux LED flexible tape light featuring high brightness, high color rendering index 2835 LEDs and durable printed circuit board (PCB). The excellent thermal conduction maintain a less lumen depreciation and long bright effect. Designed for dry indoor locations using only.

LED Quantity 300 pcs /600 pcs
Total Length 16.4 feet/32.8 feet
Ingress Protection IP20
LED Type 2835 Single Color
Input Voltage 100-240V AC 50/60Hz
Working Voltage 24VDC
Radiation Angle 120·
Color Temperature 3000K,6000K
Dimmable Yes
Length Max. 16.4 feet per connection
Bending Radius 20mm
Package Including 1 x power supply 1 A@24VDC

1 x l 6.4feet LED strip;
2 x l 6.4feet LED strip

PACKAGE INDUCES COMBINATION OF

Part Description Quantity
A 16.4 ft LED Light Strips (adhesive backs) AC/DC Adaptor

| 1/2
B| AC/DC Adaotor

| 1
C| Dimmer

| 1

APPLICATIONS

  • Cove Lighting
  • TV Back Lighting
  • Accent Decor Lighting
  • Under Cabinet Lighting
  • Display Case Lighting
  • Task Lighting

CAUTION

  • Maximum bending radius is 20 mm. Solely bend up or downward.

  • Do not compress or stretch the LED strip.

  • Do not bend the LED strip sideward.

  • Do not twist the LED strip.

 ONLY CONNECT THE LED STRIP LIGHT TO THE POWER SUPPLY (24V DC CONSTANT VOLTAGE OUTPUT) IN THE PACKAGE.

 ONLY OPERATE WHEN COMPLETELY UNROLLED.

Any other adapters might cause damage or fire.

Maximum connect 16.4 feet to the included power supply. Overloading the included power supply may cause damage and possibly fire. Do NOT change to any other power supply and connect 2 rolls LED strips, there will be voltage drop in the second roll.

CUTTING

Always disconnect the power supply before shortening. LED Strips can be cut along the mark of “scissor” in every 6 LEDs segment.

INSTALLATION PLANNING

Before getting started, think about the questions below.

  • Where will your power supply be located?
  • How will you run your wiring to your LED strip lighting?

The self-adhesive tape on the back of LED strips is intended for a single application only. Apply only when a lighting location is fully determined. Although LED Light Strips can be installed in curved and irregular spaces, avoid sharp bends or bending on the solder joints as you could damage the light strip.

DIMMER

Working temp.: -20-60°C
Supply voltage: DCl 2-24V
Max load current: 2A
Gross weight: 55g
Function: can achieve steeples dimming

WARNING:

  1. Supply voltage of this dimmer is DCl 2-24V; it never connects to AC220V.
  2. Novar connects two wires directly in case of short circuit.
  3. Lead wire should be connected correctly according to the connecting diagram.
  4. The warranty for this product is one year, in this period we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged or overload working.

INSTALLATION

Always disconnect the power supply before installation. Clean the surface to assure the self-adhesive backing will adhere properly. The mounting surface needs to be smooth, dry, and free from oils and waxes.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals