SODOLA B09NKDK7BP 16 Port Gigabit PoE Switch Power Supply User Manual

USER Manual
POE Switch
Tech Support: [email protected]

Connecting Equipment

Panel diagram

LED Indicator Definition

power supply
Light off| Unattached or abnormal receiving equipment
III| Port indicator light| Flicker| Indicates that there is data being transmitted
Light off| Not connected or abnormal

Description

• The products described in this manual, including but not limited to the illustrated products, please refer to the actual product purchased. If any changes on product appearance, please refer to the official product information
• PoE switch and ethernet switch installation methods are the same, the actual use environment and method that depends on the specific product requirement

Packing List

• Switch(Specific model See the product label for more details)
• Power Cable(The default is pluggable or a power cable with built-in power module)
•  Power Adapter(Use for some external power products)
• Console Cable, Configurable Disc(Use for managed products)
• Brackets, Screw(Rack type standard, desktop type optional)
• User manual, Certification

Installation Precautions

• Do not install the equipment in the environment of seepage, drip or condensation easily, otherwise the equipment might bum out
• Please ensure the environment where the equipment is installed is well ventilated, and forbidden to block the cooling holes
• Do not install the equipment in a high density dust environment
• If rack switches are in a natural heat dissipation environment, please ensure the separation distance exceeds 1U
• Do not aerial cabling outdoor, otherwise the equipment is prone to lightning strike
• Using temperature and humidity depend on the descriptions of the specific product

Safety Precautions

• Do not look directly at the optical port to prevent the laser beam from burning your eyes
• Do not install the power cord with power on to avoid personal injury
• Do not supply power before equipment installation and wiring
• ESD protection is necessary during the installation and maintenance of equipment
• Do not place objects on the device

Technical Parameter

Product type: Gigabit uplink POE Ethernet communication
Port Description: 16 POE 10/100/1000M port +2 10/100/1000M port
INPUT VOLTAGE: AC 110V-240V
Overall Power Consumption: the full load <400W
MTBF:100,000h
Working/storage temperature:-10°C~+70°C
Exchange method: store forward
Forward Delay:<5us
Polarity reversal: supported
Flow control: supported
Giant frames: supports 10 Kbytes
Network topology: supports ring topology, star topology,
bus topology tree topology, etc Network standard: IEEE802.3 IEEE802.3uIEEE802 3ab, IEEE802 3x
Protection level: P30
Shell: High quality metal, super strong heat dissipation
Appearance structure: 30021046mm (length X wide x High, excluding protrusions)
Cable requirements: National standard Category 5 unshielded twisted pair cable or higher level cable

Switch Installation

Switches support a variety of installation methods, desktop, wall mounted, rack
mount, please install according to the actual environmental requirements
Mounting Ear Installation
Rack Mount Installation

1. Install 4 floating screws on the front hole bar of the cabinet, 2 on each side
2. Load the equipment into the cabinet
3. Use M6 screws to secure the equipment with the cabinet/rack
4. Install earth wire to earth connection point

PoE Powered Function

※ This function is applicable to PoE switches, not applicable to non-PoE switches
Standard PoE Power Supply
Passive Poe Power Supply

1. Standard PoE power supply includes: protocol detection, power pin sequence detection, power output, abnormal protection, Link abnormal! monitoring
2. The PoE power supply protocol includes: IEEE802.3af (15.4W), IEEE802.3at (30W)
3. The standard PoE power pin sequence is 12+/36-, and the Passive PoE power pin sequence is 45+/78-
4. The standard POE switches can automatically detect and supply power to the PDs that meet the standard, non-POE devices are not powered and only transmit data
5. Passive PoE switches use mandatory power supply mode, non-PoE powered devices may be burned out, please use with caution
6. 24V POE switches have both low-voltage power supply and PD detection technology, which can provide 24V voltage on 45/78 pin, even if it is connected to non-standard equipment, it will not burn out

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>