OLIGHT Oclip 300 lumens EDC Clip Magnetic Mini Flashlight User Manual

OLIGHT Oclip 300 lumens EDC Clip Magnetic Mini Flashlight

Product information

The Oclip is a clip-on light with dual light sources. It comes with a rechargeable Li-ion battery with a capacity of 280mAh and a voltage of 3.7V (1.036Wh). The light has a cool white color temperature range of 5700-6500K and a color rendering index (CRI) of 70. It produces a high brightness of 300 lumens. The light also features a redlight mode with a brightness of 4 lumens. The Ocliph has an IPX5 rating, making it resistant to water splashes. It weighs 30g (1.06oz) and has dimensions of (L)48.5(W)21(H)23mm or (L)1.91(W)0.83(H)0.91in including the battery.

Product Usage Instructions

1. Charge: Connect the included USB-C charging cable to the USB-C charging port on the Oclip (Figure 2). Plug the other end of the cable into a USB power source. The battery level indicator will turn red to indicate charging and green when charging is completed.
2. On/Off: Press the button to turn the Oclip on or off (Figure 3).
3. Lockout / Unlock: To enter lockout mode, when the light is off, press and hold the side switch for about 2 seconds (Figure 4). The light will enter moonlight mode briefly and then switch off to indicate lockout mode. The red indicator at the center of the switch will be on for a short time to indicate lockout mode. To unlock, continue holding the side switch for over one second until the moonlight mode is on again.
4. Moonlight Mode: To activate moonlight mode, press and hold the button for 1 second or more when the flashlight is off (Figure 5). If the last used mode was moonlight mode, simply press the button to activate it.
5. Change Brightness Level (White light mode only): In white light mode, press the button to change the brightness. The output starts from the current brightness and changes in the order of Low->Medium->High->Low. Release the button to select the desired brightness level (Figure 6).
6. Switch between Red and White Light Mode: Press and hold the button for more than 0.5 seconds to switch between red light and white light mode (Figure 9).
7. Switch between Red Light Modes: Double press the button to switch between red light modes (Figure 10).
8. Turn on the White Light Beacon: Triple-press the button to turn on the white light beacon (Figure 11).
9. Battery Indicator: Double press the button to check the battery level. The indicator will show green for 60-100% battery, orange for 30-60% battery, and red for 0-30% battery (Figure 12).

Multi-language dictionary

Table 3 Multi-language dictionary

• Moonlight
• Low
• Medium
• High
• Strobe
• White light
• Red light
• White light beacon
• Press
• Double press
• Triple press
• Press and hold

1. Product specification, see Table 1 and Table 2.
2. Product overview, see Figure 1.
3. Operating instructions below:
   • Charge, see Figure 2.
   • On/Off, see Figure 3.

Single press the button to turn on and off. When turned off, the current mode will be memorized. (Strobe and White Light Beacon can’t be memorized)

Table 1: Specifications

• COOL WHITE
  • CCT: 5700-6500K CRI: 70
  • The above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference. The tests are performed indoors under. a room temperature of 25 degrees Celsius with windless conditions. The runtime may vary depending on the external temperature and ventilation conditions, and these biases may affect the results of testing

Table 2: USB-C Charging Cable

1. Lockout / Unlock, see Figure 4.
   When the light is off, press and hold the side switch for about 2 seconds to access the lockout mode. The light will enter the moonlight mode first and then switch off to signal the lockout mode. The red indicator at the center of the switch will be on for ashort time to indicate that the light is still in lockout mode. To unlock it, continue holding the side switch for over one second until the moonlight mode is on again.

2. Moonlight mode, see Figure 5.
   To activate Moonlight mode, press and hold the button for 1 second or more when the flashlight is off. If the last used mode was Moonlight mode, simply press the button.

3. Change brightness level (White light mode only), see Figure 6.
   In the white light mode, long press the button to change the brightness. The output starts from the current brightness, and changes in the order ofLow->Medium->High->Low. Release the button to select the brightness.(Note: Moonlight mode are not included in this cycle).

4. Strobe mode, see Figure 7.
   To turn Strobe on, quickly press the button three times or more when the light is off. Press or press and hold to turn off Strobe.

5. Red light mode, see Figure 8.
   While the light is on or off, double-press to enter red light mode. Single- press to turn off, and the current mode will be memorized when the light is turned on again.

6. Switch between red and white light mode, see Figure 9.
   When the light is on, double press the button to switch between red light mode and white light mode.

7. Change red light mode, see Figure 10.
   In the red light mode, press and hold for more than 0.5 seconds to switch to red light blink, release the button, and press and hold for more than 0.5 seconds to go back to constant red light.

8. Turn on the white light beacon, see Figure 11.
   Turn on the white light beacon by quickly pressing the button three times when the light is off or in red light mode. To exit the mode, simply press or press and hold the button.

9. Battery Indicator, see Figure 12.

PRECAUTION

DANGER

• Do not disassemble the product.
• Do not throw the product into the fire, it may cause the battery to burn or even explode, causing unpredictable disasters.

CAUTION

• Do not look directly at the light source or shine it into your eyes, as this may cause temporary blindness or permanent damage to your eyes.
• Do not obstruct the lens, or else the energy emitted from the light may cause the object to burn.
• Don’t place, charge or use this light in a car where the temperature inside may exceed 60°C or in similar environments.
• Do not immerse the product in water or other liquid as it will damage the product.
• Do not place the light in a dusty environment as dust may enter the switch and cause functional failure.
• The clip is magnetic, and the metal powder adsorbed on the surface will affect the function, please clean it immediately.

NOTICE

• Please only use the TYPE-C charging cable to charge the product to avoid damage.
• Charge the product completely before storing it for a long period.
• If the product is carried, or transported, please lock the product.
• When the charging port is not in use, keep the dust cover closed to prevent dust or foreign objects from entering.

REMARK

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• Non-pet toys.
• When the ambient temperature is below 0°C/32.0 °F the light can only output at the low and medium brightness mode.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

WARRANTY

• Within 30 days of purchase: Contact the original seller for repair or replacement.
• Within 2 years of purchase: Contact Olight for repair or replacement. If you experience quality problems or damage with low-value fittings like lanyards or clips within 30 days of purchase under normal use conditions, please contact our after-sale service. For issues that occur after 30 days or for damage caused by abnormal use conditions, we provide conditional quality assurance as appropriate

CONTACT

• USA Customer Support cs@olightstore.com.
• Global Customer Support contact@olightworld.com.
• Visit www.olightworld.com. to see our complete product line of portable illumination tools.
• Dongguan Olight E-Commerce Technology Co., Ltd
• 4th Floor, Building 4, Kegu Industrial Park,
• No 6 Zhongnan Road, Changan Town,
• Dongguan City, Guangdong, China.
• Made in China
• A clip-on light with dual light sources.

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>