KVC-24 1080P PTZ with Fxied Zoom Wireless Conference Room Camera Instruction Manual
- June 14, 2024
- KVC
Table of Contents
**KVC-24 1080P PTZ with Fxied Zoom Wireless Conference Room Camera Instruction Manual
**
Assembling Instruction
- Connect the antenna to the appropriate position, and then connect the power supply to the camera.
- Plug the USB signal receiver into the computer USB interface. When using desktop computers, please connect it directly to the USB port behind the host, and DO NOT use it with the front port.
- After the camera is connected, open the software you plan to use. For example, Livestream, Zoom, Facebook, etc
Product Operation Instruction
Connection
-
Connect the antenna and power supply
-
Connect the USB signal receiver to the computer
Overview
The appearance of the camera is shown in the image below:
Product Schematic Table
| Serial | Description | Serial | Description |
|---|---|---|---|
| 1%10 | Infrared receiver | 5 | USB signal receiver |
| 2 | Power indicator light | 8 | One-key flip |
| 3 | Working indicator light | 9 | Antenna screw hole (connecting the antenna) |
| 4 | Microphone | 11 | Type-C charger interface |
| 6&7 | Wireless signal matching key |
(When the wireless signals do not match, press the Ⓡ and keys at the same time
to match the signal, the indicator light on the signal receiver will flash
quickly, when it stops flashing, it means the match is successful)| 12| USB
interface(2.4G wireless camera version without function)
13| 1/4-20UNC screwing hole
Remote Controller Operation
”
Focus Control:
Fine-tuning while the focus is not clear.
(Fixed focus model without function)
Reset Control:
Press 4 times to restore the default (factory settings).
Preset function Setting:
Adjust the camera lens towards to the certain angle position to be preset,
press digital (1-9) number, then press” .You can preset9 positions.
Preset position Calling:
Press the digital (1-9) number of the preset position that you want to
call, then press” , the device will automatically run to the corresponding
preset position
Zoom Control:
Zoom in : Increase the multiple of optical zoom
Zoom out : Reduce the multiple of optical zoom
(Find focus model without function
Pan &Tilt Direction Control:
Control the camera pan /tilt to rotate Up.
Control the camera pan /tilt to rotate Down
Control the camera pan /tilt to rotate Left.
Control the camera pan /tilt to rotate Right.
Rotation angle : level 340° & vertical 70°
Preset position Delete:
Press the digital number of the preset position that you want to delete,
then press” “, the corresponding preset position will be deleted.
Packing List
Serial| Photo| Parts description| Quantity|| Unit
---|---|---|---|---
1| | Camera whole machine (include PTZ)| 1| PC
2| | Type-C charger| 1| PC
3| | Remote controller| 1| PC
4| | Antenna & USB signal receiver| 1| PC
5| | Lens cover| 1| PC
6| | Screw| 1| PC
7| | Manual| 1| PC
Attention
- The camera equipment with the “preset” function will have a self-testing for about 1 minute after powering on. During self-testing, please avoid any “external force contact” with equipment.
- Please connect external power supply before connecting the USB signal receiver.
- Please keep the lens clean, otherwise it will affect the image clearance effect.
- While the pan/tilt is working, do not block the operation of the machine by using external force, so as not to affect the service life of the equipment.
- Please protect the equipment properly, as the equipment contains high-precision fragile parts.
- Please do not disassemble or repair the equipment unauthorized, if there is any fault please send it to the distributor for repair.
- Please do not use the equipment in an environment where the temperature changes suddenly.
- Please do not expose the lens to the sun for a long time, to prevent damage to the image sensor of the camera.
- Please avoid contact with oil, steam, water vapor, soil, and water.