Neakhmer JSU8001 Tyre Inflator Air Compressor User Manual
- June 14, 2024
- Neakhmer
Table of Contents
Neakhmer JSU8001 Tyre Inflator Air Compressor
Product Information
The Tire Inflator is a portable device designed to inflate tires. It comes with various accessories, including a ReplacementFuse and a Needle Valve Adapter. The product features a handle for easy carrying, an air tube with an On/Off Switch for inflation control, and an LED lamp with a Pressure Gauge and an LED light switch. It operates on a power cord. Please note that the illustrations in the manual are schematic diagrams for reference only, and the actual product may vary in configuration. The recommended tire pressure for private cars should be followed for optimal performance.
Product Usage Instructions
- Start the car.
- Insert the cigarette lighter plug into the cigarette lighter socket.
- Pre-set the desired tire pressure.
- If using a mechanical watch version, the current pressure will be displayed on the pressure gauge during the inflationprocess.
- If using a digital edition, press R to select the unit, then press + or – to adjust the pressure value. Once the pressure figures stop flickering, turn on the switch to start working.
- Connect the air tube to the tire valve.
- Press the On/Off switch to start inflating.
- If using a digital edition, the machine will automatically stopinflating once the tire pressure reaches the pre-set pressure. Then, turn off the switch.
- After completing inflation, turn off the switch.
Attention
- Do not disassemble, repair, or modify this product withoutauthorization.
- Do not place the product near heat sources such as car heat rejection outlets.
- Some heating during normal operation is a normal phenomenon.
- To ensure the air pump’s good performance, avoid continuous inflating for extended periods. Allow for interval rest if long-time inflation is required.
Warranty Card
To receive a one-year warranty for this product, please email service@neakhmer.com with the following order details:
Product Name:
Order NO:
Order Date:
We will respond within 48 hours of receiving your information.
Product Description
- Handle
- LED lamp
- Air tube
- Pressure Gauge
- On/Off Switch
- LED light switch
- Air tube storage
- Power cord
Included Accessories
Product Specification
| Name | Tire Inflator |
|---|---|
| Size | 195×85×165mm |
| Power | 120W |
| Rated voltage | DC 12V |
Recommend tire pressure for private cars
How to inflate
Stop Automatically
(Digital Edition) The machine will stop inflating automatically as soon as the tire pressure reach the pre-set pressure, Then turn off the switch.
Preset pressure
Press “R” to select the unit, press “+” or “-” to adjust the pressure value,After the pressure figures stops flickering, turn on the switch to start work.The machine will stop automatically once the tire pressure reaches the presetted pressure, Turn off the switch after inflating complete
Attention
- Do not disassemble, repair or modify this product without authorization
- Do not put it beside heat sources such as car heat rejection outlet
- The normal operation of the product will make the product slightly heating which is a normal phenomenon
- In order to ensure the good work of the air pump, the continous inflating time should not be too long, It needs to interval rest if long time inflation is required
Warranty Card
Please email at service@neakhmer.com with your order details below to get a one year warranty for this product
Product Name|
---|---
Order NO:|
Order Date:|
We will respond you in 48 hrs from receiving your information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>