YONOK RSH09 Cordless Vacuum Cleaner User Manual

YONOK RSH09 Cordless Vacuum Cleaner

Read this instruction carefully before use.
This product complies with the applicable requirements of Directive 2014/35 / EU (repealing Directive 73/23 / EEC as amended by Directive 93/68 / EEC) and 2014/30 / EU (repealing Directive 89/336 / EEC)

IMPORTANT WARNINGS

• PLEASE READ THE SAFETY INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

Safety Instructions

• This unit can be used by children from 8 years old and people with physical, sensory, or mental skills or lack of experience and knowledge provided they have been placed under supervision or have received instructions for using the machine safely and that they understand the dangers.
• Children should not play with the appliance. The cleaning and maintenance by the user should not be done by children without supervision.
• This device is intended for domestic use only.
• This unit is suitable for low to medium-felt back carpets. It is not suitable for uneven floors or mixed carpets.
•  Remove the side brush at the under-carpet cleaning to protect the side brush.
• If the adapter’s power cord is damaged, the adapter must be discarded.
• Recharge/battery / s only with the charger supplied by the manufacturer.
• Use the device with the battery (s) specifically created (s) for this purpose. The use of any (s) other (s) battery (s) could cause an explosion or fire Please use an adapter to use this product only.
• Do not use on wet or greasy dust.
• Before use, keep fragile items (glass, light, etc.) and others. objects that could entangle the brushes(long hair, plastic bags, rope, wire, etc.).
• Do not sit on the machine and do not put heavy things on it.
• WARNING: Make sure the unit can function freely in the room (it is not blocked by an obstacle, it cannot fall over) and that there is no obstacle on which the device may tip and create a risk of danger (such as lighted candles or a vase filled with water).
• Regularly clean the vacuum cleaner.
• Empty the dust container.
• Load the machine without using it for three months.
• Recharge only in the situation of a low-power alarm or when the power is turned off. Use it after fully charged.
• The battery must be removed from the apparatus prior to its disposal; the device must be disconnected from the mains when removing the battery.
• Do not dispose of batteries with household waste. Eliminate them in accordance with local regulations.
• Recharge the battery / the robot only with the adapter provided with the device.
• The cable of this adapter’s external flexible cannot be replaced; in case of damage to the cord, it is necessary to remove the adapter and replace it with an adapter of the same model.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery contained in this vacuum cleaner can not be replaced by another model of battery.
• WARNING: For charging the battery, only use the detachable supply unit provided for this appliance.
• WARNING: Risk of entrapment hazard. Keep loose clothing, hair, fingers, etc. away from the motorized brushes and nozzles
• WARNING: the plug must be removed from the socket outlet before cleaning or maintaining the appliance

IMPORTANT

• It is forbidden to replace the power cable by yourself if damaged. If the device is dropped, please ask a qualified person to check it before using it again.
• Internal damage could cause accidents. For any kind of problems or repairs, please contact the customer service of the local distributor, manufacturer, or a qualified person to avoid danger.
• Disposal And Environmental Social Responsibility
• In order to be environmentally friendly, we encourage you to have your device correctly.
• You can contact your local authorities or recycling centers for more information.

PRODUCT DESCRIPTION

Vacuum Cleaner

1. Li-ion Battery Pack
2. Ergonomic Handle
3. On/Off Switch
4. Outlet HEPA Cover
5. Metal Tube Release Button
6. Aluminum Extension Tube
7. Floor Brush Release Button
8. Motorized Floor Brush
9. Dustbin
10. Dustbin Release Button
    • Digital Display Panel
11. Battery Indicator Light
12. Max Suction Level Indicator
13. Min Suction Level Indicator
14. Adjust Suction Level
15. Brush Roller Tangled
16. Air Channel Blocked

Attachment And Accessories

• Motorized floor brush: Suitable for low-pile carpets and hard floors.
• Long crevice tool : For cleaning the trash in the corners, gaps, baseboard edges, and other hard-to-reach places.
• Dust brush tool: Use the brush to clean upholstered surfaces, keyboards, lamps, curtains, blinds, vents, etc. Perfect for cleaning hair and dust inserted on the fabric. Use the crevice portion to do the ordinary cleaning task.
• To switch between the brush and crevice portion, press the button on the accessory and slide the brush up or down.

What’s In The Package

• Main Engine & Dustbin x1
• Motorized Floor Brush x1
• Long Crevice Tool ×1
• Dust Brush Tool ×1
• Extension Metal Tube x1
• Wall-mounted Dock x1
• Power Adapter x1
• Hepa Filter x1
• Wall Mount Positioning Sticker x1
• Hair Cleaning Gadget x1

INSTRUCTIONS TO INSTALLATION

Metal Tube Connect

1. Insert the metal tube to the main body until a click sound is heard.
2. Press the metal tube release button to remove the tube.
   • How To Extend The Metal Tube
3. Press the “metal tube release button” with one hand, and hold the “ergonomic handle” with another hand, slide the track of the telescopic rod to lengthen or shorten the metal tube.

Floor Brush Installation

1. Insert the motorized brush on the end of the tube until a click is heard.
2. Press the motorized floor brush release button to remove the motorized floor brush.

How To Use The Floor Brush

1. Do Not move the motorized brush backward toward the dirt you want to pick up.
2. Moving in the forward direction to pick up dirt, then pull back along the cleaned track, and then turn slightly and push forward to continue picking the next track of dirt in a ladder pattern.
3. If the floor brush is not able to turn free or is stuck with a foreign object. Please cut off the power of the brushless motor to prevent the motor from getting damaged.

Battery Installation

1. Press the battery release button
2. Slide out the battery pack
3. Plug into charge

Charging The Battery

1. Removable Battery Charging
2. Wall-Mounted Charging
3. Machine Head Charging

How To Install The Wall Mount Dock

1. Find the wall position that needs to be punched. It is recommended to be above the ground at least 120cm.
2. Align the “positioning holes” of positioning stickers and the wall position that needs to be punched.
3. To screw “wall mount dock” onto the wall.

PRODUCT OPERATION

Please Charge In Time

1. When the battery’s power is less than 10% Or out of power will flash until the power is off.
2. When the battery pack is fully charged, the indicator light on the battery pack and on the control panel will light up for 1 minute and then light off.

WARNING!

1. The battery must be fully charged for the first 3 times using.
2. Don’t overcharge the battery for extended periods, as this may damage the battery. So unplug when not charging.
3. When the room temperature is higher than 30°C, It may take you a longer time to charge.
4. When the vacuum is not in use for more than two months, the battery pack and vacuum need to be stored separately. In order to ensure a longer service life, the vacuum cleaner needs to be charged every two months.
5. The vacuum or adapter may become hot during charging, so be sure to take the necessary precautions to avoid contact.
6. Do not lean the vacuum against any surface in an upright position to support it at any time in case of accidental slipping or falling.

Start To Work

1. Select the appropriate accessory to use according to different cleaning tasks.
2. Press the ON/OFF switch, the machine will start to work. Press it again to stop.
3. Press the speed control button to adjust 2 suction power levels.

CLEANING AND MAINTENANCE

Cleaning Frequency:

1. To maintain the performance of the vacuum, clean inlet HEPA, outlet HEPA, and filter mask monthly or whenever airflow is weak.
2. Clean the dust cup after every use!

Dust Cup And Inlet HEPA Cleaning

1. Preshe tonto pen the dust tank cover. They no real the dustbin eds code wiped with a wet wipe or a wet microfiber cloth, and the dustbin cannot be immersed in water.
2. Lift out the filter mask by twisting the count clockwise and pulling it out.
3. Then separate all HEPA filters from the filter mask by twisting the count anticlockwise and pulling out.
4. Shake to remove dust. Wash the HEPA filters under running cold water.
5. Air dry all filters completely before re-assembling.

Floor Brush Cleaning

1. Push the release button
2. Remove the hair and debris with a hair-cleaning gadget

TECHNICAL CHARACTERISTICS

• Power Adaptor Input : 100-240V 50/60Hz
• Adaptor Output : 26.5V 0.5A
• Motor : DC 200W
• Motor life (H) : > 500
• Battery Type : 22.2V Li-ion battery
• Battery Capacity : 2200mAh
• Battery Lifespan 300 Cycles
• Working Time : 18-45 Minutes
• Charging Time : 4-5 Hours
• Dust Bin Capacity : 0.8 Liters
• Noise Level ≤76dB
• Ground Brush Rotation Angle: 175°
• Speed Levels : 2 Speeds
• Product Dimensions : 25cm20.5cm119cm(LWH)
• Net Weight 2.2Kg

TROUBLESHOOTING

If you encounter a problem with your device or if you suspect the device is not working properly, you can make a few simple checks before calling a technician.

CAUTION:

• The power brush contains electrical connections, do not immerse it in water for cleaning.

YONOK Is Here To Help:

• Email: [email protected]
• Work Hours: 07:00 AM-11:00 AM (CDT) WEEKDAY 20:00 PM-24:00 PM (CDT) WEEKDAY

WARRANTY POLICY

Disposal

• The presence of this logo on the product means the disposal of 2012 on electrical and electronic equipment (WEEE). the device is governed by Directive 2012/19 / EU dated 4 July Any hazardous substance in electrical or electronic equipment can have a potential impact on the environment and health during recycling. Consequently, at the end of the useful life of the device, it should not be disposed of with municipal unsorted waste.
• Your role as final consumers is crucial in terms of reuse, recycling, and obtaining other types of value creation from this.
• You have the choice of different collection systems and exchanges organized by local authorities (recycling centers) and distributors. It is your duty to use these opportunities.

In The End Of Battery Life

• This appliance contains batteries that are irreplaceable.
• Used batteries must be supported by a selective collection system in order to be recycled thus reducing the impact on the environment.
• When the battery reaches its end of life, you must place it in an appropriate selective collection system that will handle its destruction and/or recycling.
• If the battery acid has leaked, avoid contact with skin, eyes, and mucous membranes! The liquid that leaks from the battery can cause rashes.
• If acid still comes into contact with the skin, immediately flush the affected areas with clean water and consult a doctor immediately.
• The batteries must be installed with the correct polarity +/-
• Do not recharge non-rechargeable batteries because of the risk of explosion.

IMPORTANT POINTS
Under no circumstances should you throw the device or battery on a public road
The warranty does not cover product wear parts, no problems or damage resulting from:

1. Surface damage due to normal wear of the product;
2. Defect or damage of product caused by contact with liquid and due to corrosion caused by rust or the presence of insects;
3. Any incident, abuse, misuse, modification, unauthorized removal or repair;
4. Any improper maintenance operation that is not in accordance with product instructions or is connected to improper voltage;
5. Any use of accessories not supplied or approved by the manufacturer.
   The warranty is void if the elimination of plate and/or the product serial number.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>