Miahhy ST-6645 Mini Handheld Vacuum Cleaner User Guide

June 14, 2024
Miahhy

Miahhy logo Cordless Vacuum Cleaner
ST-6645
User’s GuideMiahhy ST-6645 Mini Handheld Vacuum
Cleaner

Thank you very much for purchasing this product!
Please read the instruction manual carefully before using the product.
It will guide you to use the product correctly and remind you of things you need to pay attention to.

Safety Instructions

  1. Please read all contents of this manual carefully before using this product.
  2. Keep this manual properly. If you transfer the product to a third party. please include this manual with the machine.
  3. Any operation inconsistent with the instructions in this manu al may result in serious personal injury, property loss or damage to the product itself.
  4. Our company does not bear relevant legal liability for losses caused by failure to operate in accordance with the instructions and guidelines of this product.
  5. Instructions that are very important for your personal safety, please be sure to read these carefully to avoid accidents and possible damage to the product.
  6. When working with the product, please be particularly cautious and extra careful to avoid danger.
  7. Please keep this product properly and keep it out of the reach of children and people who are not capable of judging environmental hazards.
  8. Do not store this praduct in high places to avoid the risk of accidental falling.

Product Parameters

Product number ST-6645C
Rated voltage 7.4V
Rated input 5V  ****2A
Dust cup capacity 0.2L
Interface Type USB
Product Size 21.3X16.3X6.7cm
product weight about 340g
shell material ABS
Motor type DC Moter

Product Structure

Miahhy ST-6645 Mini Handheld Vacuum Cleaner - part

  1. OFilter
  2. Dust cup
  3. Switch button
  4. Air outlet
  5. Handle
  6. Charging port

List of Accessories

Miahhy ST-6645 Mini Handheld Vacuum Cleaner - parts Installation Notes

Host dust cup assembly installation

  1. Install the HEPA filter into the dust cup as shown in the diagram.
  2. Follow the diagram and rotate the dust cup assembly counterclockwise. If there is a ‘click” sound, the installation is successful.

Vacuum mode

  1. Insert the two-in-one flat suction device into the suction port of the main unit.Miahhy ST-6645 Mini Handheld Vacuum Cleaner - parts2

Blow Mode

  1. Install the air blowing nozzle on the main unit in the direction of the arrow.

Exhaust Mode

  1. Install the air extraction nozzle on the main unit according to the head direction.

Usage

  • Preparation before use
    1. Use a 1A-2A mobile phone charger to charge. Make sure all parts of the cordless vacuum cleaner are assembled in place. Check whether the battery is sufficient to ensure the product is working properly.
    2. Please do not turn on the phone while charging. The red indicator light on the charging cable indicates normal charging status, and the blue light is always on when fully charged.
    3. Plug the charging cable into the USB port and the other end into the charging port.

  • Charging instructions
    1. Plug the charging cable into the USB port and the other end into the charging port.
    2. Please do not turn on the phone while charging. The red indicator light on the charging cable indicates normal charging status, and the blue light is always on when fully charged.

Instructions

Start up
The whole machine uses a point switch, press the switch button, the host will start in the standard working mode, and the color of the indicator light will be green. Closure
Press the switch button to turn it off.
Notice
Before using new batteries or storing batteries for the first time for a long period of time, please fully charge the batteries. Please charge for more than 3 hours before first use.
Please fully charge before long-term storage. When the battery enters a power- deficient state, the machine cannot be charged, affecting normal use.

Product Disassembly & Cleaning

  1. First, rotate the dust cup in the direction shown in the figure and remove it from the main unit.Miahhy ST-6645 Mini Handheld Vacuum Cleaner - parts6
  2. Take out the Hypa filter in the dust bin and pour the garbage into the trash can.
  3. Separate the HEPA filter and dust cup in order, and clean the HEPA filter with a brush. The dust cup is washable and must be dried before use.
  4. To reinstall the dust bin, put the filter into the dust bin, follow step 1 above and tighten it in the opposite direction before use.

Rotate the dust bin and remove it Hold the dust bin in the direction shown in the figure and take out the filter upwards. Dump the garbage in the dust bin Flush filter and dust bin Drying filter and dust bin

Miahhy logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals