KGUSS PA7 Series Plus Power Amplifier Instructions
- June 14, 2024
- KGUSS
Table of Contents
KGUSS PA7 Series Plus Power Amplifier
Fully balanced
The PA7 and PA7 Plus utilize a new Class D amplifier circuit with a variety of
exclusive optimization techniques, which has powerful low distortion
performance and power output . These technologies ensure a clearer, cleaner,
deeper sound without any background noise. In addition, the balanced structure
is able to reduce various of noise during transmission, thus enabling better
performance of the audio source and avoiding wasted performance during
transmission.
Distortion is as outstanding as DAC
The distortion performance of PA7 and PA7 Plus is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.
Insane output power
The PA7 series amplifiers are less than half the size of an A4 sheet of paper,
but they are all capable of delivering 210W x 2 (PA7) or 300W x 2 (PA7 Plus)
to a 4-ohm load at 10% distortion. If the higher standard 1% distortion is
used as a requirement, the 4-ohm load will output 200W x 2 (PA7) or 245W x 2
(PA7 Plus) respectively. Moreover, these high power outputs and low distortion
characteristics are sufficient to meet the needs of most speakers and
applications
2Х Inputs:
One set of Combo connectors (compatible with XLR and TRS)
One set of RCA connectors
The joy of stacking at this moment
The E70 and E70 Velvet have preamp functions and have the exact same design
language as the PA7 series amplifiers, and the signal can be transmitted
between the DAC and the amplifier via XLR, TRS balanced or RCA cables.
You can control the volume on PA7 and PA7 Plus, or set to bypass the volume control of PA7 and PA7 Plus, then you can use a better pre-amplifier for volume control.
All standby Perfect Match
The PA7 and PA7 Plus can be perfectly paired with the E70, E70 Velvet and L70 to instantly unlock a more comprehensive system of high quality music experiences. from digital sources to speakers and headphones.
PA7 series is equipped with 12V Trigger input trigger interface, which can be linked with other devices to switch on and off. One button to light up and turn on synchronously
Note: PA7 series amplifiers require the switch to be set to “TRIG” to use the 12V Trigger function.
Contents list
Note: The above data is the result of the test in TOPPING laboratory under AC220V 50Hz condition.
Note: The above data is the result of the test in TOPPING laboratory under AC220V 50Hz condition.
