IMAXTOP B0CCDZ8YK5 Wireless Lavalier Microphone User Manual

June 14, 2024
IMAXTOP

IMAXTOP B0CCDZ8YK5 Wireless Lavalier Microphone

Introduction

Thanks for choosing our product. This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. It can be used in different scenes such as Live Streaming, Video Recording, Online Teaching and others.
The wireless microphone consists of three components: two microphone transmitters and a 3-in-1 multi-function receiver. (see as below pictures )IMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-Microphone-1

ID Diagram

  1. Windproof sponge
  2. Indicator light of microphone
  3. Type-c charging port of microphone
  4. Microphone clip
  5. Power button of the microphone
  6. Reset key of the microphone
  7. Type-C receiver
  8. 3.5 mm receiver
  9. Lightning receiver
  10. Indicator light of receiver
  11. Power button of receiver
  12. Type-C charging port of receiver
  13. 3.5mm audio transfer interface

How to use Lightning/Type-C receiver

First: Plug the Lightning or Type-C receiver into the Lightning or Type-C port of the mobile phone, and the green light of the receiver flashes quickly .IMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-Microphone-3

Second: Single press the power button of the mic, it is turned on successfully when the green light is on.IMAXTOP-B0CCDZ8YK5-Wireless-
Lavalier-Microphone-4

Last: The green light of the receiver always stays on, and then the microphone works when opening the phone camera to make a video recording or opening live streaming Apps to make a Live show.IMAXTOP-B0CCDZ8YK5-Wireless-
Lavalier-Microphone-5

Special Notes: For the number, if the mobile phone is in the low battery during live streaming, the external power supply directly charges the mobile phone through the Type-C port of the receiver.IMAXTOP-B0CCDZ8YK5-Wireless-
Lavalier-Microphone-6

How to use 3.5 mm receiver

  • Step 1: Insert the 3.5mm receiver into the corresponding port of the device, then press the power button on the receiver. Once done, the green light will start flashing.
  • Step 2: Press the power button of the microphone to turn it on, and the green light will start to flash. Then the microphone will automatically pair with the receiver, and the green light will stay on to indicate a successful pairing.
  • Step 3: Turn on the device, the microphone will work directly.

About UI

Microphone TransmitterIMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-
Microphone-9

Lightning ReceiverIMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-
Microphone-10

Type-C ReceiverIMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-
Microphone-11

3.5mm ReceiverIMAXTOP-B0CCDZ8YK5-Wireless-Lavalier-
Microphone-12

Note:

  1. Clear the pairing /factory reset operation steps: with the mic in the power-on state, use a needle to quickly tap the side hole of the mic (TX) twice. when the green light flashes quickly, short press the button on the 3-in-1 receiver or turr on a phone in 10s and quickly press the power button three times, and the green light will flash quickly. After waiting for about 10 seconds, the mic and receiver will automatically be successfully connected, and the green light will stay on, indicating a successful pairing. Repeat these steps for both the 2 mics and the 3-in-1 receiver.
  2. During recording or live streaming, you can listen to the video or recording through a single wired earphone. You can listen to the video or recording only after the receiver is unplugged from the device.
  3. The microphone can be used normally during the charging process. when in a connected state, the charging indicator flashes alternately between red and orange.
  4. For certain models of Android phones, such as Oppo, Vivo, and OnePlus, there may be additional steps required to enable certain functions.
  5. Step 1: If your phone has an OTG (On-The-Go) function, you may need to manually turn it on.This can usually be done by going to Settings > Additional Settings > OTG, and toggling the switch to turn it on.
  6. Step 2: Some models of Android phones may require manual setup to enable certain features. For example, to use an external microphone for recording audio, you may need to go to Settings > Sound & Vibration > Other settings > Default Recorder >Use Peripheral Device.

Packing list

  1. Microphone transmitter (Dual-Channel Version with 2 pcs)
  2. 3-in-1 multi-function receiver
  3. Type-C charging cable (Dual-Channel Version with 2 pcs)
  4. User manual
  5. 3.5mm TRS TO TRRS patch cable
  6. 3.5mm single wired earphone
  7. Carrying bag

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals