OLIGHT Nightour Desk Lamp USB-C Rechargeable LED User Manual

USER MANUAL

Olamp 2
Ambient lamp compliments your mood.

Nightour Desk Lamp USB-C Rechargeable LED

IN THE BOX

Table 1:
Olamp 2 (Light Stem)

White Light CCT: 2700K CRI:80

Lamp head
White Light CCT: 4000K CRI:90

• Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight’s labs for reference.

Table 2: USB charging cable

Figure 1
Assemble the light stem and base

Figure 2
Install the headlamp

Figure 3
Connect the power supply and magnetic charging port

Figure 4
Turn on/off headlamp

Figure 5
Turn on headlamp, enter white light mode with low brightness

Figure 6
Stepless dimming changes headlamp brightness

Figure 7
Switch high light and low light of headlamp

Figure 8
Turn on/off ambient light

Figure 9
Turn on ambient light, enter the low white light mode

Figure 10
Stepless dimming changes the brightness of ambient light

Figure 11
Switch ambient light mode

Figure 12
Music rhythm mode

HOW TO USE THE APP

Figure 13

Figure 14
Add devices

1. Turn on Bluetooth and location services, then connect to Wi-Fi.
   Note: Wi-Fi connection only supports 2.4G network, cannot support 5G.
   

2. Use your personal email to register an account and log in.
   Then add devices following the APP instructions.

Figure 15
Enter the network setting mode

Figure 16

Figure 17

Figure 18

Figure 19

HOW TO OPERATE：

1. Product specification, see Table 1 and Table 2;

2. Operating instructions as below：
   2.1 Assemble the light stem and base, see Figure 1;
   2.2 Install the headlamp, see Figure 2;
   2.3 Connect the power supply and magnetic charging port, see Figure 3;
   2.4 Turn on/off headlamp, see Figure 4;
   2.5 Turn on headlamp, enter white light mode with low brightness, see Figure 5;
   2.6 Stepless dimming changes headlamp brightness, see Figure 6;
   2.7 Switch high light and low light of headlamp, see Figure 7;
   2.8 Turn on/off ambient light, see Figure 8;
   2.9 Turn on ambient light, enter the low white light mode, see Figure 9;
   2.10 Stepless dimming changes the brightness of ambient light, see Figure 10;
   2.11 Switch ambient light mode, see Figure 11;
   2.12 Music rhythm mode, see Figure 12.

3. The APP operating instructions as below:
   3.1 Download and install the APP, see Figure 13;
   3.2 Add devices, see Figure 14;
   3.3 Enter the network setting mode, see Figure 15;
   3.4 Add devices successfully, see Figure 16;
   3.5 White light/colored light control interface, see Figure 17;
   3.6 Music rhythm interface, see Figure 18;
   3.7 Cloud timing/Power-on interface, see Figure 19.

WARNING

• Please do not drop or throw it from high places, or hit it with heavy objects.
• Do not let children play with it, to prevent the product from causing physical harm.
• Please do not touch or block the magnetic port with fingers, any part of the body, or any object when attaching the lamp head onto the magnetic port, to avoid physical injury or damage to the object.

CAUTION

• Do not soak the product in water, because it may damage the product.
• Do not short-circuit the charging port with metallic objects.

NOTICE

• Keep the top magnetic port clean. Otherwise, the Olamp 2 may not be able to control the eco-chain product or charge other products.

• The top magnetic suction port may produce metal debris due to long-term rotation wear and tear. Please pay attention to cleaning any debris and foreign matter often, otherwise it may cause abnormal noise and wear during rotation.

• A USB adapter with 10W(5v2A) or above is recommended. Otherwise, the charging time will be longer.

• Olamp 2 magnetic port, only supports charging, cannot support control temporarily. (Obulb Pro S, Obulb Plus Control function will be available with subsequent OTA upgrades).

• Frequent operation or multi-device control may lead to data congestion and cause the APP to respond slowly or cause no response at all. Please try again or refresh the status.

• When multiple devices are connected to the network simultaneously, they will complete connecting one by one. It will fail if a product hasn’t been connected within 3 minutes.
  It is recommended that the number of devices that are connected at the same time should be less than 5.

• Wi-Fi connection only supports 2.4G network, cannot support 5G.

Exclusion clause

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

WARRANTY

WITHIN 30 DAYS OF PURCHASE: Contact the original seller for repair or replacement.
WITHIN 2 YEARS OF PURCHASE: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China

3.4000.0556
A. 3.20.2023

References

• Olight | Illuminate Your World.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>