DARCHE T050801743 Eclipse 270 G2 Left Awning User Manual

DARCHE T050801743 Eclipse 270 G2 Left Awning

Product Information

The product is an Eclipse Awning manufactured by Darche. It is designed to be mounted on a vehicle’s roof rack and provides shade and protection from the elements.

The Eclipse Awning comes with the following parts:

• 6 25mm M8 mounting bolts and nuts
• 6 Twist-lock leg poles (3 in a canvas bag)
• 2 Tension straps
• 13 Pegs
• 13 Guy ropes

Please note that additional attachments may be required depending on the specific roof rack configuration.

Product Usage Instructions

1. Before first use, ensure that all parts are included.
2. To attach the bracket to the roof rack, follow these steps:
   • Refer to the examples provided in the manual for mounting the Eclipse Awning brackets to different roof rack styles.
   • If in doubt, consult a roof rack specialist for specific mounting options and advice on load capacities.
   • Additional Darche channel bolts or extended brackets may be required for certain applications.
3. It is recommended to use an experienced after-market 4×4 Accessories fitter to mount the Eclipse Awning to your vehicle.
   • Regularly check the fasteners and fix connections to ensure secure mounting.
4. When setting up the awning, follow these steps:
   • Remove the cover by unzipping it and folding it over the awning body.
   • Release the three Velcro straps to allow the canvas to drape.
   • Follow steps 1 to 4 to open the awning.
   • Swing out the left arm fully and attach it to the roof rack using the supplied tension strap.
   • Swing out the right arm fully towards the rear of the vehicle and attach it to the roof rack using the supplied tension strap.
   • Set up the pole by adjusting each support leg to the desired height using the internal twist-locking mechanism.
   • Attach the remaining rafters to the poles by inserting the spigot into the holes at the end of each rafter.
   • Secure all guy ropes for stability.
   • If attaching optional walls, each rafter must be supported by a leg pole.
   • In case of rain, lower the support legs to create a downward slope and allow water runoff between rafters.
5. To pack down the awning, follow these steps: Ensure all guy ropes are secured.
   • Do not stow the canvas carry a bag containing additional legs inside the awning’s transit cover.
   • Roll up the canvas loosely to make it easier to zip up the transit cover.

ECLIPSE 270° AWNING

SET-UP & CARE INSTRUCTIONS

GET TO KNOW YOUR AWNING

We recommend you check all parts are included prior to first use.

ECLIPSE 270° CONTENTS

• 1 Eclipse 270° Awning
• 3 Mounting brackets
• 6 ‘U’ Bolts with nuts and washers
• 6 25mm M8 mounting bolts and nuts
• 6 Twist-lock leg poles
• (3 in a canvas bag)
• 2 Tension straps
• 13 Pegs
• 13 Guy ropes

ATTACHING BRACKET TO ROOF RACK

• Darche’s Eclipse Awning brackets have been designed to fit the most common roof rack configurations. However, with the ever-increasing number of roof rack designs available, it is difficult to supply a mounting bracket to accommodate all. Below are examples of how to mount the Eclipse Awning brackets to Flat-style and Basket-style roof racks. The bracket can also be mounted on roof bars, however, additional specific attachments may need to be sourced from your roof rack supplier.
• If in doubt, visit your roof rack specialist for specific roof rack mounting options and advice on load capacities.
• Darche’s Extended Bracket (325mm long) was now available as a mounting option on platform-style roof racks. (sold separately). Visit www.darche.com.au for specs and availability.

ATTACH AWNING TO BRACKET

• Darche recommends using an experienced after-market 4×4 Accessories fitter to mount the Eclipse Awning to your vehicle.
• Fasteners and fixing connections should be checked regularly on both the awning and roof rack to ensure the awning is always mounted securely to your vehicle roof rack.
• Ensure the unsupported ends of the awning do not exceed 500mm.
• Darche takes no responsibility for the fitment of the Eclipse Awning to any vehicle or roof rack.
• Insert supplied 25mm M8 bolts into grooves in the aluminum backing plate.
• PROLONGED TRAVELING ON UNEVEN ROUGH OR CORRUGATED TERRAIN WILL REQUIRE MORE FREQUENT INSPECTIONS.

SET-UP

REMOVE COVER

• Unzip the cover and fold it over the awning body.

RELEASE AWNING

• Release the three Velcro straps and allow the canvas to drape.

OPENING

• To begin setting up the awning follow steps 1 4
• TIP AWNING WILL SELF-SUPPORT DURING SET UP ONLY
• SWING OUT THE RIGHT ARM FULLY TOWARD THE REAR OF THE VEHICLE AND ATTACH TO THE ROOF RACK USING THE SUPPLIED TENSION STRAP

POLE SET-UP

• Undo the Velcro straps securing each support leg. The leg will pivot down to a vertical position. Adjust to the desired height by unlocking and locking the internal twist-locking mechanism.
• Attach 3 x additional support poles to 3 x remaining rafters by inserting spigots into holes at the end of the rafter.
• Secure the end of each rafter by anchoring and tensioning guy ropes.
• ENSURE ALL GUY ROPES ARE SECURED.
• IF ATTACHING OPTIONAL WALLS, EACH RAFTER MUST MUST BE SUPPORTED BY A LEG POLE.
• IN CASE OF RAIN, LOWER THE SUPPORT LEGS TO ALLOW A DOWNWARD SLOPE AND GUY OFF BETWEEN RAFTERS TO FORM VALLEYS FOR WATER RUN-OFF.

PACK-DOWN

• Undo all pegs/guy ropes.
• Fold-away legs and stow away using attached velcro straps.
• Stow 3 x additional legs in a canvas carry bag.
• Release front and rear tension straps.
• Fold the RHS of the awning back 90° from the awning body ensuring the top rafters sit directly on top of the bottom rafters.
• Fold the LHS of the awning back 90° from the awning body ensuring the top rafters sit directly on top of the bottom rafters.
• At this point fold the LHS of the awning toward the awning body followed by the RHS. The canvas should drape down in a triangular shape.
• Roll canvas and secure using Velcro straps.
• Position PVC bag over awning and zip up to complete pack down.
• DO NOT STOW THE CANVAS CARRY BAG CONTAINING THE ADDITIONAL LEGS INSIDE THE AWNING’S TRANSIT COVER.
• A LOOSE ROLL IS BETTER THAN A TIGHT ROLL. THIS WILL ALLOW THE CANVAS TO FOLD FLAT AGAINST THE AWNING MAKING IT EASIER TO ZIP UP THE TRANSIT COVER.

CLEANING

• Clean with cold water and a soft bristle brush. Do not use soaps and detergents. Do not be exposed to petrol, diesel, oils, or chemicals of any nature.

STORING

• Correct storage is vital for the longevity of your Eclipse Awning. If on occasion the awning is required to be stowed wet, it is essential it is unpacked and dried as soon as possible. Rot, mildew damage, and incorrect storage are not covered under warranty.

STRUCTURAL INTEGRITY

• The Darche Eclipse Awning has been designed for general camping use under normal conditions. Always ensure all rafters are supported by leg poles provided and all guy ropes are anchored correctly. It may be necessary to re-adjust guy ropes and pegs at times to maintain the structural integrity of the awning.
• To avoid chances of personal injury and or property damage, Darche highly recommends the Eclipse Awning should NOT be erected during windy conditions.
• Damage caused by wind and or adverse weather will not be covered under warranty.

VEHICLE FITTING

• Darche recommends using an experienced aftermarket 4×4 accessories fitter to mount the Eclipse Awning to your vehicle.
• Fasteners and fixing connections should be checked regularly on both the awning and roof rack to ensure the awning is always mounted securely to your vehicle roof rack.
• Prolonged travelling on uneven rough or corrugated terrain will require more frequent inspections.
• Ensure the unsupported ends of the awning do not exceed 500mm
• Darche takes no responsibility for the fitment of the Eclipse Awning to any vehicle or roof rack.
• Darche’s Eclipse Awning brackets have been designed to fit the most common roof rack configurations. However, with the ever-increasing number of roof rack designs now available it is difficult to supply a mounting bracket to accommodate all. If in doubt please visit your roof rack specialist for specific roof rack mounting options and advice on load capacities.

WATERPROOFNESS

• Darche has taken great care in its refined raw material selection, design, and development of its tents and awnings in regard to waterproofness. With the use of water-repellent coatings and High-Frequency seam sealing, Darche has strived to eliminate water ingress as best as possible on its recreational tents, shelters, and awnings.
• Unfortunately with the addition of zips and multiple-layer seams, wind-driven rain may cause water to ingress at times. To minimize this, ensure all rain flaps are adequately covering the zips.
  Seams connecting multiple layers of fabric could leak at times depending on weather conditions and location. A quick and easy solution is to rub a softened wax stick over the affected area.

USING THE OPTIONAL WALLS

• The zip-on awning walls will provide a sheltered / protected area around the awning. When attached to the awning, they are designed to create a shaded area and help reduce dust.
• IN WINDY CONDITIONS IT IS HIGHLY RECOMMENDED NOT TO ERECT THE AWNING AND WALLS AS PERSONAL INJURY AND OR PROPERTY DAMAGE MAY OCCUR.

SAFETY WARNINGS

• KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THE FABRIC.
• UNDER NO CIRCUMSTANCES SHOULD ANY NAKED FLAME SOURCES BE USED NEAR THE AWNING.
• KEEP CAMPFIRES AWAY FROM THE AWNING.
• KEEP A LOOKOUT FOR ANY AIRBORNE BURNING EMBERS THAT MAY COME INTO CONTACT WITH THE TENT.
• KEEP A FIRE EXTINGUISHER OR WATER BUCKET NEARBY.
• DO NOT OPERATE ANY DEVICE THAT BURNS FUEL INSIDE THE AWNING WHILE WALLS ARE ATTACHED.
• KEEP EXITS CLEAR.
• DARCHE RECOMMENDS FIXING ALL GUY ROPES AT ALL TIMES WHEN THE AWNING IS IN USE.
• REMAIN CAUTIOUS AROUND GUY ROPES TO PREVENT INJURY.
• ENSURE CHILDREN ARE SUPERVISED AROUND THE AWNING AT ALL TIMES.
• darche.com.au
• Designed and tested in Australia for Australian conditions.
• A brand by Charles Parsons.
• Telephone 1300 367 695.
• Email: [email protected]
• 75 Heyington Avenue,
• Thomastown VIC 3074, Australia
• DARCHE: LEADERS IN OUTDOOR DESIGN. PROUDLY AUSTRALIAN.

References

• DARCHE | Camping and Outdoor Gear Since 1991 | Australia – DARCHE®
• DARCHE | Camping and Outdoor Gear Since 1991 | Australia – DARCHE®

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>