BARSKA AA10202 Brass Spotting Scope Instructions

BARSKA AA10202 Brass Spotting Scope

Product Information

SPYSCOPE 25×30 w/ stand AC10202

Congratulations on your purchase of the SPYSCOPE 25×30 with stand AC10202. This stylish scope is crafted from durable brass with a base stand constructed of wood and brass. The scope is rugged enough for use and elegant enough to display on your mantel.

This luxurious piece will be the center of talk for hours to come.

Product Usage Instructions

1. After unpackaging, separate the scope and the base stand by pulling the scope up, causing it to pop out from the base (refer to Figure 1).
2. Once separated, extend the Barlow to its full capacity.
3. Point the objective lens towards the object you want to observe and look through the eyepiece. Slightly push the Barlow into focus, and continue until the object appears clearest. If necessary, pull the Barlow slightly outward again if you pushed it in too much. Gradually push or pull the Barlow to bring the image into focus.
4. To make micro-adjustments and prevent the scope from sliding in or out erratically, turn the Barlow while pulling it in/out (refer to Figure 2).

Taking Care Of Your Spyscope

1. When wiping the lenses, use the cloth provided with the Spyscope. If no cloth is provided, use a soft, lint-free cloth.
2. If there is remaining dirt or smudges, add one or two drops of Isopropyl Alcohol to the cloth.
3. When not in use, store your Spyscope in a dry, moisture-free environment.
   IMPORTANT: Do not attempt to clean your Spyscope internally or take it apart.

For any questions or comments regarding your scope or to explore other optical products, please visit our website at www.barska.com.

USING INSTRUCTION

Introduction

Congratulations on your purchase of your Spyscope. This stylish scope is crafted from durable brass with a base stand constructed of wood and brass. The scope is rugged enough to use, yet elegant enough to display on your mantel. This Luxurious piece will be the center of talk for hours to come.

Using Your Telescope
WARNING: VIEWING THE SUN CAN CAUSE PERMANENT EYE DAMAGE.
DO NOT VIEW THE SUN WITH THIS SCOPE

1. After you have removed the scope and the base stand from the box, separate it from the base by pulling it up, causing it to pop out.
2. Now that the scope and the base have been separated, pull the Barlow all the way, extending it to its full capacity.
3. Point the objective lens to the object and look through from the eyepiece. slightly push the Barlow into focus, and continue until you see the object at its clearest. Sometimes it is necessary to pull a bit outward again if you push the Barlow in too much. By pushing or pulling the Barlow little by little the image will come into focus gradually
4. Turning the Barlow, while pulling it in/out, will help you make micro-adjustments so that the scope will not slide in or out erratically.

Taking Care Of Your Spyscope

1. When wiping the lenses, use the cloth that comes provided with the Spyscope if there is no available cloth provided use a soft, lint-free cloth.
2. To remove any remaining dirt or smudges, add one or two drops of Isopropy| Alcohol to the cloth
3. When not in use always remember to store your Spyscope in a dry, moisture-free environment.
   IMPORTANT: It is very important that you never attempt to clean
   your Spyscope internally or even try to take it apart For any questions or comments of your scope or maybe you would like to see what else we offer in the world of optics, please visit  www.barska.com

References

• Your Trusted Source for Security Solution and Precision Optics – Barska

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>