Korky 100BP Ultra High Performance Flapper Instructions
- June 14, 2024
- Korky
Table of Contents
100BP Ultra High Performance Flapper
Instructions
Troubleshooting Tips:
I need to hold down the handle to get a complete flush or my toilet flapper
is closing too quickly. We need to adjust the flapper to stay open a bit
longer. We recommend turning the red band to the higher numbers located on the
underside of the flapper (closing off the holes and allowing the flapper to
float longer). This will prevent you from having to hold down your toilet
handle.
My toilet flapper is staying open too long or my toilet is double
flushing. We need to adjust your toilet flapper to flush less water. This is
accomplished by turning the dial on the flapper to open up larger holes – this
will allow the flapper to closer quicker and avoid double flushes. There are
several settings to get the perfect flush.
How to attach the flapper chain correctly: Attach the flapper chain with
minimal slack and to the hole on the flush lever arm, most directly above the
flapper (this helps to ensure the flapper is being lifted straight up and down
and not side to side). If there is too much slack in the chain, this can cause
a weak flush. If there is too much slack, this can create a slow leak beneath
the flapper.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>