meross B0BRKJM5MD Smart Plug Power Strip User Manual

meross B0BRKJM5MD Smart Plug Power Strip

Safety Information

1. It is recommended that this device is used indoors in a dry location only.
2. Use the device within its rated power included in the product specifications on the package.
3. Make sure the device is fully plugged in and kept out of reach of children for safety concern.
4. Please do not disassemble the device, otherwise there may be product damage or security risks.
5. Most accidents resulting from electric tool operation and maintenance are caused by the failure to observe basic safety rules or precautions. Therefore, please read and understand all the safety precautions.
6. Please contact seller for replacement in the event of freight damages.

Installation Guide

1. Download the Meross app.
   |
   ---|---
   

2. Plug MSS425F into an outlet near main WI-Fl.*
   

   • Proximity to main Wi-Fi is required only during the initial setup process.
   • MSS425F only supports 2.4GHz networks.

3. Set up the device.

4. Connect your smartphone or tablet to a 2.4 GHz Wi-Fi network.

5. Make sure your smart device is covered by strong Wi-Fi signal.

6. The smart device supports iOS 13/ iPodOS 13 and later. It is recommended that you upgrade your iOS or iPodOS to the latest version before pairing with the smart device.

7. Launch the Meross app and log in to your account, or if you are a new user, tap Sign up to create a new account.

8. Tap the  ·+· icon to select the type of smart device you want to add, then you can just follow the setup wizard to finish configuration.

9. Relocation of the smart device does not require additional operations provided that it remains on the same network with strong Wi-Fi signal.

NOTE:

1. If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.
2. As long as you finish configuration, you’ll be able to manage the device in Apple Home app.
3. If the QR code does not work, please try to add the smart device in Apple Home app.

LED and Button Rules

Link Meross to Google Assistant or Amazon Alexa

Set up the device in the Meross app and link it to the voice assistants.

Link to Amazon Alexa
Go to Account-> Amazon Alexa and allow
Meross to link with Alexa.
Link to Google Assistant
Go to Account-> Google Assistant and follow the step-by-step instructions to complete the linking process.

FAQ

At Meross, we strive to assure your satisfaction. Attached below is a non- exhaustive list of questions that users are mostly concerned about.

What devices can I control with the Smart Surge Protector?

You can control lights, fans, humidifiers, portable heaters, and any small appliances in accordance with the MSS425F’s specifications (up to 15A output).

What if I can't control the smart device with the Meross app?

You can troubleshoot the following: – Check if your home Wi-Fi is working properly. – Make sure that you have disabled access control in your router and that the smart device is not blocked by the router’s firmware. – Factory reset your smart device and try to add it again.

My Home app can't add the device by scanning the QR code.

You can tap “Don’t Have a Code or Can’t Scan” and input the code manually.

I can't pair my device with HomeKlt anyhow.

Please make sure your iOS is connected to the 2.4GHz home Wi-Fi and you are having iOS 13 or above. Restart your iOS will help due to some system cache issue.

Warranty

Meross products are covered by a 12-month limited warranty from the date of purchase. Please visit https://www.meross.com/support/warranty for detailed warranty policy and product registration.

Disclaimer

1. The function of this smart device is tested under a typical circumstance described in  our specifications. Meross does NOT guarantee that the smart device shall perform exactly the same as described under all circumstances.
2. By using third-party services including but not limited to Amazon Alexa, Google Assistant, Apple HomeKit and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
3. Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross after sales service, nor does Meross take any legal responsibility therefrom.

Customers acknowledge understanding of these articles clearly by reading this manual.

FCC Compliance Information Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Canadian Compliance Statement

This device contains licence-exempt transmitter (s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Customer Support

SIMPLE DEVICE
SIMPLIFY YOUR LIFE

Email: support@meross.com

Website: www.meross.com

Manufacturer: Chengdu Meross Technology Co., Ltd.
Address: No. 1312, Building E6-l, Tionfu Software Porte:, Chengdu, Chino

MADE IN CHINA

Documents / Resources

| meross B0BRKJM5MD Smart Plug Power Strip [pdf] User Manual
B0BRKJM5MD, B07DMFZGVL, B0BC1B7H4D, B0BRKJM5MD Smart Plug Power Strip, B0BRKJM5MD, Smart Plug Power Strip, Plug Power Strip, Power Strip, Strip
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>