LOKMAT B0CCL1TN5F Attach Pro Smart Watch User Manual

Table of Contents

Please check if you have the following items:

LOKMAT-B0CCL1TN5F-Attach-Pro-Smart-Watch-1

Upper right: Long press to switch on and off, short press to turn off the screen.
Bottom right: Back, secondary menu. Upper left: heart rate.
Bottom Left: Sports.

ATTACK PRO is used in Android 4.4 and iOS 8.2 or above. You can download and install Da Fit first through the following QR code.

Before using the product, please charge it for 2 hours.
If the connection between the charging cable and the charger is unstable, please reconnect the data cable and the charger.
If you cannot turn on the device or charge it, please use a 5V/2A or higher charger to charge the device for more than 20 minutes to activate the battery.

Swipe the screen to the left：Voice assistant, call records, today’s data, health monitoring, weather, camera control, music, breathing training
Swipe the screen right：Secondary menu
Slide Down Screen：Phone, About This Phone, Menu View, Vibrate On, Brightness, Settings
Swipe Up Screen：display information.
Bluetooth connection operation steps
Download and open the Da Fit APP, search for the Bluetooth device “ATTACK PRO”, and connect to Bluetooth 5.1

LOKMAT-B0CCL1TN5F-Attach-Pro-Smart-Watch-4

Dial Mode： Long press the dial interface to switch the dial.
Call Function： Make calls, hands-free calls, hang up, call records,sync contacts, adjust volume.
Menu： List menu, 8 sets of different UI styles, switch at will.
Information Push： After the phone is connected to the watch, it will vibrate to remind you of incoming calls and text messages.
Weather： After the watch is connected to the APP, the weather interface will display the weather status.
Music： After the watch is connected to the APP, it can control the music player.
Sports ：Walking, running, cycling, hiking, rope skipping, basketball, volleyball, badminton, tennis, football, golf, table tennis, rock climbing and more than 100 sports.
Sports Data ：Display the number of steps, distance, and calories recorded on the day, and you can set exercise goals in the APP.
Heart Rate： Heart rate measurement, the green light is on to start the measurement, and there will be a vibration reminder when it is completed.
Blood Pressure ：For blood pressure measurement, the green light will start the measurement, and there will be a vibration reminder after completion.
Sleep Monitoring： Display the sleep monitoring status of the day Blood oxygen：When blood oxygen measurement is completed, there will be a vibration reminder.

Watch won’t turn on
Please press and hold the power button for more than 3 seconds or the battery power may be too low, please charge it in time.

Bluetooth is not connected or unable to connect

Inaccurate measurement of heart rate/blood pressure/blood

oxygen

Generally, it is caused by poor contact between the sensor of the watch and the human body during measurement.
Please make sure that the sensor is in full contact with your wrist during measurement.
For people with darker skin and more hair on their arms, please turn on the enhanced measurement in App[Device]> [Enhanced Measurement].

Sleep data is not accurate enough

Sleep monitoring is to simulate a person’s natural falling asleep and waking time state, and it needs to be worn normally.
Wear it when you fall asleep too late or when you fall asleep, errors may occur.
Sleep data is not monitored during the day, and the default sleep monitoring is from 9:30 pm to 12:00 noon the next day.

For more frequently asked questions, please check App [My]> [FAQ].