NOCO GENIUS10 Charging Modes Installation Guide

Table of Contents

The GENIUS10 is a versatile battery charger designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries. It is 17% smaller than the G7200 model and delivers 115% mor power. The charger is compatible with various battery types including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.
One of the standout features of the GENIUS10 is its precision charging capability. The charger is equipped with an integrated thermal sensor that detects the ambient temperature and adjusts the charging process accordingly. This ensures that the battery is not overcharged in hot climates or undercharged in cold climates.
Additionally, the GENIUS10 can charge dead batteries as low as 1-volt. It also introduces a new Force Mode that allows users to manually begin charging dead batteries down to zero volts.
The charger is simple to set up and use. Users only need to plug it in, connect it to the battery, select a charge mode, and start charging. It is a fully-automatic charger that provides worry-free battery charging all year round.
The GENIUS10 also features a battery restoration function. It can detect sulfation and acid stratification, and restore lost performance for stronger engine starts and extended battery life.
With its wide compatibility, the charger can be used with various types of vehicles including cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, and hot rods.

Ensure that the charger is suitable for your battery type (6V or 12V) and chemistry (lead-acid or lithium).
Make sure the battery is compatible with the charger’s capacity range (up to 230 Amp-Hours).
Connect the charger to a power source using the provided cord.
Connect the charger’s clamps or ring terminals to the battery. Ensure proper polarity (red clamp/terminal to positive, black clamp/terminal to negative).
Select the desired charge mode based on your battery type and condition. Refer to the user manual for specific instructions on choosing the appropriate mode.
Start the charging process by pressing the appropriate button or engaging the charging mode.
Monitor the charger’s LED indicators or display to track the charging progress.
Once the battery is fully charged, disconnect the charger from the power source and remove the clamps or ring terminals from the battery.
Store the charger in a safe place for future use.

Note : Always refer to the user manual for detailed instructions and safety precautions specific to your GENIUS10 charger model.

Meet the GENIUS10 – Similar to our G7200, just better. It’s 17% smaller and delivers 115% more power. And it’s simpler and easier to use than ever before.
Do more with Genius – Designed for 6-volt and 12-volt lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.
Enjoy precision charging – An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
Charge dead batteries – Charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts.
Simple to set up and use – Plug-in, connect to the battery, select a charge mode, and start charging your battery. A fully-automatic, worry-free battery charger for year-round use.
Restore your battery – Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life.
Compatible with all types of vehicles – Charge and maintain cars, motorcycles, lawnmowers, ATVs, tractors, trucks, SUVs, boats, classic cars, hot rods, and more – you name it.