FOXWEAR V6S Smart Camera Helmet User Manual

FOXWEAR V6S Smart Camera Helmet

Product Information

The FOXWEAR helmet is a versatile product that provides driving safety protection, recording capabilities, and left and right turn warning lights. It is designed to enhance your safety while offering a technology-driven experience. The helmet features a PC shell, camera, goggles, ear protector (optional), locks, warning light, battery, head circumference adjuster, and EPS main body. It also includes a waterproof silicone design and a TYPE-C interface. The helmet comes with a replaceable 18500 battery.

Product Usage Instructions

1. Recorder Function: To start recording, short press the recording power button (as shown in the manual) until the blue light flashes. To stop recording, press and hold the power button for 3 seconds until the blue light turns off. To reset the device, press the reset button with a thimble while the device is powered on.
2. Photo Function: To take a photo during the video recording process, short press the power button once.
3. WIFI Function: To enable the WIFI function during the recording process, short press the WIFI button. The green light indicates that the WIFI function is turned on. To turn off the WIFI function, short press the WIFI button again.
   • Note: During the boot process, long press the WIFI button for about 10 seconds to restore factory settings and format the TF card. Please use this feature with caution.
4. Battery Type: The helmet uses rechargeable replaceable 18500 batteries.
5. Data Reading: To access recorded data, download the Outdoor APP and connect to the helmet via the WIFI link. Alternatively, you can remove the TF card from the helmet and use a card reader to read it on a computer.
6. Recording While Charging: The helmet supports recording while charging. You can turn on the recorder function while the device is being charged.
7. Time Modification: Link the APP to synchronize the time with your mobile phone.
8. Map Track Query (Optional): Download videos to your mobile phone using the Outdoor APP.  Close the APP WIFI link and play the videos in the APP to view the map track synchronously. Alternatively, you can use the GXplay playback software to view the map track synchronously through online playback.
9. Download and Install Woutdoor APP: Scan the QR code or search for Woutdoor APP in the Apple and Android markets to download and install it.
10. Connect Using the APP: Install the Outdoor APP and then turn on the WIFI function on your mobile phone. Connect to the helmet using the APP.

Product introduction

Thank you for choosing FOXWEAR helmet, this helmet not only has the function of driving safety protection, but also has the functions of recorder and left and right turn warning lights.. While protecting your safety, it will also bring you a new sense of technology experience. The following is an introduction to the functions of this helmet and how to use it correctly

Product functions and buttons

Ways to use

1. Recorder function: short press the recording power button (as shown), and the blue light flashes to start recording. Press and hold the power button for 3 seconds (as shown), the blue light will turn off and the recording will be turned off. Pressing the reset button with the thimble in the power-on state is the reset function, which can restart the machine.
2. Photo function: Short press the power button once During the video recording process
3. WIFI function: During the recording process, short press the WIFI button, and the green light will turn on the WIFI function. Short press the WIFI button again and the green light will turn off to turn off the WIFI function
   • Warning: During the boot process, long press the WIFI button for about 10 seconds to restore the factory settings and format the TF card, please use this item with caution!
4. Taillight alert function: short press the taillight button (as shown), and the tail light flashes slowly in sequence – fast flash – long bright- extinguished cycle.
5. Battery Type: Rechargeable replaceable 18500 Battery.
6. Data reading: Please download the Woutdoor APP and download data to your mobile phone via the WIFI link. Or take out the TF card and read it on the computer through a card reader.
7. Recording while charging: This device has the function of recording while charging. While charging, the recorder (as shown) function can be turned on at the same time.
8. Time modification: Link the APP, the time can be WIFI synchronized with the mobile phone time.
9. Map track query (optional): Download the video to the mobile phone through the Woutdoor APP, close the APP WIFI link, and play it in the APP to view the map track synchronously. Or by downloading the GXplay playback software, you can view the map track synchronously by online playback.
10. Download and install the Woutdoor APP: scan the QR code or search for Woutdoor APP in the Apple and Android markets.
11. Connect using the APP: Install the Woutdoor APP, then turn on the WiFi function on the V6S helmet, find V6S_xxxxx in the mobile phone WiFi option, and connect, the original password: 1234567890 After opening Woutdoor APP, you can operate various functions.
12. GXPLAY software computer installation: directly read the files of the TF card, find the GXPLAY software for installation.
13. Emergency file saving: When the helmet is hit, the instant file will be urgently saved and stored in the EVENT folder to avoid repeated overwriting later.

Ways to wear

1. Please wear the helmet horizontally, do not lean forward and backward too much, and adjust the head circumference size adjuster to be less prone to shaking and comfortable
2. Adjust the position of the webbing bifurcation buckles on both sides of the helmet so that the ears are in the middle of the webbing, and fasten the buckles to prevent them from falling off during driving
3. If the helmet is hit hard or damaged, please stop using it
4. The helmet can be wiped with clean water, but must not be wiped with organic solvents such as alcohol, gasoline, or corrosive liquids such as acid and alkali
5. The helmet should be placed in a cool and ventilated place to prevent moisture and mildew

Product details

Matters needing attention:

1. After receiving the helmet, pleasemmake sure it is fully charged before turning it on
2. When charging or temporarily not in use, please turn off the warring lights
3. The electronic module part of the helmet has a certain waterproof function when it is properly worn, but it is not recommended to use it when it is raining Or when it rains, please cover the helmet with a waterproof hood in time
4. If raindrops accidentally fall into the helmet, please place it in a ventilated place to dry, and use it again after drying.
5. In extremely low weather or freezing temperatures, battery life can be affected.

Warranty Regulations

Warranty Rules

1. If there is any inconsistency or omission with the national policy, the national policy shall prevail;
2. This product is guaranteed for one year free of charge due to product quality problems from the date of purchase and is replaced within 15 days under the condition that the product is in good condition
3. The company is not responsible for other configurations of the product (such as packaging and gifts, etc.)

Warranty Description

Your warranty service is only valid under normal use, damage not caused by the quality of the product itself, and one of the following conditions: No warranty, but can be repaired for a fee

1. Exceeded the warranty period warranty certificate and valid invoice, except for those that can prove that the product is within the validity period of the warranty
2. The content on the warranty certificate does not match the actual product or is altered
3. Damage caused by the use, repair, and maintenance, not in accordance with the requirements of the product instruction manual
4. Damage caused by dismantling by a service shop not authorized by the company
5. Damage caused by force majeure
6. Natural wear and tear of the product (eg: case, keys, paint, accessories, etc.)
7. Failure, defect, or defect not caused by our company

Troubleshooting of electronic functions

During use, if the following abnormality occurs, please check whether the TF card is installed correctly or damaged, or reset it (please use a thimble or toothpick, etc. to reset), if the fault cannot be eliminated please contact the after-sales service center

1. Cannot turn on or charge normally
2. When the machine is turned on, the camera and other functions are abnormal or cannot be used
3. Automatic shutdown occurs within a short period of time after startup

warning

1. The product contains batteries, please do not put the discarded products and general household waste together. Please follow the relevant regulations of the local management department and contribute to environmental protection
2. The product contains a battery. Do not put the product into fire or place it in a high-temperature place to prevent the battery from leaking, overheating, bursting, or fire
3. The product contains batteries. It is strictly forbidden to disassemble, squeeze, heat, or burn the battery. It is strictly forbidden to use sharp objects, screwdrivers, etc. to puncture or pry the battery. Operation may cause the battery to catch fire or burn
4. The product contains a battery. When charging, because the battery temperature will rise, please do not put the product and flammable objects together (such as bedside, clothing, books, etc.) to avoid fire

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. www.foxwearhelmet.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>