Vento ACBV250452XB Raki Ceiling Fan Instructions
- June 4, 2024
- Vento
Table of Contents
Vento ACBV250452XB Raki Ceiling Fan
INSTRUCTIONS
SAFETY INSTRUCTIONS
- Protection class I: The fitting has an earthing connection: The earth wire (yellow/green) has to be connected to the clip marked .
- The fitting should only be installed in rooms where direct contact with water is impossible.
- Reverse function.
- Light source (yes / not included).
- Remote control included.
- This device children can use it with age of 8 years or more and people with physical, sensory or mental small capacities, if they has been given them the supervision or adapted training. The children must not play with the fans. The cleanliness and the maintenance must be done by an adult.
WARNINGS
- Read entire booklet carefully before beginning installation and save these instructions.
- To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.
- To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location.
- For the electrical connection, it is necessary to incorporate an isolator switch according to the installation regulations, which ensures all-pole cut, directly connected to the power terminals and it must have a contact separation in all its poles, which provides total disconnection under category III surge conditions.
- All wiring and connections must be made in accordance with national and local electrical codes. If you are not familiar with the way to do the electrical installation, you must use the services of a qualified electrician
- Make sure that the fan is disconnected from the mains before removing the protection.
- To reduce the risk of personal injury, do not bend the blade attachment the system when installing, balancing or cleaning the fan. Never insert foreign objects between rotating fan blades.
- To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead wires.
- The fan blades cannot be installed lower than 2,3m from the floor.
The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors that cannot be built into this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.
TOOLS AND MATERIALS REQUIRED
Verify you have all parts before beginning the installation. Check the foam insert closely for missing parts. Remove the motor from packing. To avoid damage to the finish, assemble the motor on soft padded surface or use the original foam insert in the motor box. Do not lay fan on its side as this could result in shifting of the C motor in the decorative enclosure.
HOW TO INSTALL THE FAN
Place the fan. Be sure that the connections are made properly. If in doubt consult a technician. Hanging the fan. Make sure the screws are tightened.
PRE-CODED REMOTE CONTROL
OPERATIONS WITH THE TRANSMITTER
- Start-up and speed
- Reverse function
- On off for light
- Turn up/down the brightness of the light
- With Programmer: It will work for 2h, 6h
- Off for fan
- Weak-strong-weak-strong
- The light is ON about 5 minutes every 2 hours
Link remote control – fan
The reversing switch for hot or cold weather depends on factors such as the size of the room, the height of the ceiling, number of ceiling fans, etc. The reversing switch controls the direction of the fan. Hot weather/downward. The fan will turn in a counter-clockwise direction downward air circulation creates cooling. This allows you to regulate the air conditioner to higher temperature without affecting your comfort.
ACB ILUMINACION. S.L. CIF: B96498233.
Camino de Valencia, nº104, CP.46190. Ribarroja del Túria (Valencia) ESPAÑA
www.acbiluminacion.com